
1 / 4 · Click to enlarge
AI Summary
A dual 18650 battery holder with SMD pins that mounts straight onto your PCB for tidy, wiring-free power. Its two independent slots let you run one or two cells and wire series or parallel connections externally.
Key Highlights
- Dual 18650 holder with surface-mount pins for direct PCB installation
- Independent slots allow single-cell or two-cell use
- Gold-plated stainless steel contacts for reliable, corrosion-resistant contact
- ABS body rated for -40 to 180 degrees Celsius operation
- Compact 78 x 40 x 15 mm footprint weighing just 18 g
- External contact points allow custom series or parallel wiring
Ideal For
- Makers building custom battery-powered PCBs
- Hobbyists assembling portable electronics projects
- Repair technicians replacing damaged 18650 holders
- DIY enthusiasts designing compact enclosures
- Students learning surface-mount assembly
Buying Tip
Check that your PCB has a footprint matching the holder's SMD pins and confirm whether you need series or parallel wiring before soldering the external contacts.
Elecvora expert review
Our verdict
A practical board-mount solution for anyone who wants two 18650 cells on a PCB without a tangle of wires. The independent slots and gold-plated contacts make it flexible and durable for hobby and prototype work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Independent slots allow single or dual cell use
- Gold-plated stainless steel contacts hold cells firmly
- Surface-mount pins simplify board integration
- ABS body handles a wide temperature range
Cons
- Cells are not included
- Requires soldering and a compatible PCB footprint
- Series or parallel wiring must be done manually
Best for
Makers and hobbyists mounting 18650 cells on a custom PCB
Not ideal for
Users wanting a pre-wired battery pack with no soldering
Specifications
| Item Type | Battery Holder |
|---|---|
| Color | Black |
| No. of Cells | 2 |
| Contact Material | Stainless Steel |
| Plating on Contact Point | Gold |
| Body Material | ABS |
| Mounting Type | SMD |
| Operating Temperature (°C) | -40 to 180 |
| Dimensions (L x W x H) mm | 78 x 40 x 15 |
| Weight (g) | 18 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 8 × 5 × 2 cm |
What's in the box
- 1 x 18650 Dual SMD/SMT Battery Holder
Frequently Asked Questions
Does this holder include batteries?
Can I use just one cell in the holder?
How do I connect the two cells in series or parallel?
What mounting method does it use?
What is the operating temperature range?
How should I care for the holder?
Overview
The Elecvora 18650 Dual SMD/SMT Battery Holder is a surface-mount carrier for two 18650 cylindrical cells. Rather than running wires from a separate battery pack, you solder the holder's SMD pins onto your board and the cells sit directly on the assembly. That keeps builds compact and makes battery changes a simple lift-out and drop-in affair.
The two slots are deliberately not connected to each other. You can fit both cells, or use the holder as a single-cell carrier, and if you need a combined supply you create the series or parallel link yourself by soldering the external contact points. This gives you control over how the cells feed your circuit.
Key Features
- Surface-mount design: SMD pins let the holder sit flat on a PCB for a low-profile, wiring-free installation.
- Gold-plated stainless steel contacts: the plating supports dependable contact while the stainless steel shrapnel holds cells securely.
- ABS body: a durable housing that withstands higher temperatures than common plastics.
- Flexible cell count: independent slots mean one or two cells can be used.
- Lightweight: at 18 g, it adds minimal mass to a board.
Specifications Explained
Two cells, independent slots: the holder accepts two 18650 cells but does not link them internally, so you decide the configuration. Gold-plated contacts help maintain a clean connection and resist tarnish over time. ABS body material provides mechanical strength and an operating range of -40 to 180 degrees Celsius, which covers most electronics environments. Dimensions of 78 x 40 x 15 mm make it suitable for compact enclosures, and the SMD mounting type means it is intended for board-level soldering rather than wire leads.
Compatibility and Requirements
The holder is sized for 18650 cylindrical cells. Because it is a surface-mount part, you will need a PCB with a matching footprint and soldering equipment to fit it. Cells are not included, and any series or parallel connection must be made by soldering the external contact points according to your project's requirements.
Typical Uses
Makers building custom battery-powered boards, hobbyists assembling portable electronics, repairers replacing damaged holders, and anyone who wants a tidy two-cell 18650 mount inside a compact project enclosure.
What's in the Box
One 18650 Dual SMD/SMT Battery Holder. Batteries and mounting hardware are not included.
Quick specs
- Item Type
- Battery Holder
- Color
- Black
- No. of Cells
- 2
- Contact Material
- Stainless Steel
- Plating on Contact Point
- Gold
- Body Material
- ABS














