
1 / 4 · Click to enlarge
AI Summary
A 1mm pitch 30-pin FPC/FFC surface-mount connector with a drawer-style actuator for secure cable retention. Its right-angle ZIP design and compact footprint make it ideal for space-constrained boards.
Key Highlights
- 1mm pitch with 30 contacts for dense FPC/FFC connections
- Drawer-style actuator simplifies cable insertion and locking
- Surface-mount design saves space on compact PCBs
- 50V voltage rating and 0.5A current capacity
- Phosphor bronze contacts for reliable conductivity
- Nylon 46 UL94-V0 housing for flame resistance
Ideal For
- Electronics designers working on compact PCB layouts
- Repair technicians replacing FPC connectors
- Makers and hobbyists building custom devices
- Automotive and medical device prototyping
- Consumer electronics assembly and maintenance
Buying Tip
Verify that your FPC/FFC cable has a 1mm pitch and 30 conductors, and check the SMT pad layout on your PCB before ordering.
Elecvora expert review
Our verdict
This connector offers a practical solution for dense FPC/FFC connections with its drawer lock and right-angle design. It is well-suited for compact electronics where space and reliability matter.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Drawer actuator simplifies cable insertion and removal
- Compact 1mm pitch saves board space
- Right-angle design reduces vertical height
- Flame-retardant housing adds safety
Cons
- Requires precise SMT soldering
- Only compatible with 1mm pitch 30-pin cables
- Actuator can be damaged if forced
Best for
Compact PCB designs needing secure flex cable connections
Not ideal for
High-power or high-voltage applications
Specifications
| Manufacturer | Generic |
|---|---|
| Pitch Spacing (mm) | 1 |
| No. of Contacts/Pins | 30 |
| Voltage(V) | 50 |
| Operating Current (A) | 0.5 |
| Connection type | ZIP-right Angle |
| Mounting Type | SMD/SMT |
| Material | Metal and plastic |
| Contact Material | Phosphor Bronze |
| Insulation Material | Nylon 46 UL94-V0 |
| Color | Black, Beige |
| Contact Resistance (ohm) | 20MΩ (Max) |
| Insulation Resistance (MOhm) | 800 |
| Operating Temperature (°C) | -25 to 85 |
| Length (mm) | 37 |
| Width (mm) | 2 |
| Weight (g) | 1 (approx) (each) |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 1mm Pitch 30 Pin FPC/FFC SMT Drawer Connector
Frequently Asked Questions
What type of cable does this connector accept?
How do I open and close the drawer actuator?
What are the voltage and current ratings?
Is this connector suitable for reflow soldering?
What material are the contacts and housing made of?
How many connectors are included?
Overview
The Generic 1mm Pitch 30 Pin FPC/FFC SMT Drawer Connector is a surface-mount component designed to terminate flat flexible cables in tight spaces. Its drawer-style actuator lifts to accept the cable and then locks it in place, providing a secure connection without the need for soldering directly to the flex. The right-angle ZIP orientation helps save vertical height on the board, making it suitable for slim enclosures and stacked assemblies.
Key Features
- 30 contacts at 1mm pitch: Supports dense signal routing in a compact footprint.
- Drawer-lock actuator: Simplifies cable insertion and ensures reliable retention.
- Surface-mount termination: Ideal for automated assembly and space-constrained designs.
- Phosphor bronze contacts: Offer good conductivity and corrosion resistance.
- Nylon 46 UL94-V0 housing: Flame-retardant insulation for added safety.
- Right-angle ZIP configuration: Allows the cable to exit parallel to the board.
Specifications Explained
Pitch and contacts: The 1mm pitch means adjacent contacts are spaced 1mm apart, and with 30 pins, the connector can handle multiple signal lines in a narrow strip. Electrical ratings: A 50V maximum voltage and 0.5A current per contact make it suitable for low-power signal and control applications. Contact resistance: 20MΩ maximum ensures minimal signal loss, while insulation resistance of 800MΩ prevents leakage between contacts. Operating temperature: The -25°C to 85°C range covers typical indoor and protected environments. Materials: Phosphor bronze contacts resist corrosion, and the nylon 46 housing meets UL94-V0 flammability standards. Dimensions: At 37mm long and 2mm wide, the connector fits neatly on dense PCBs.
Compatibility and Requirements
This connector is designed for FPC/FFC cables with a 1mm pitch and 30 conductors. It requires a PCB footprint matching the SMT pad layout and is intended for reflow soldering. The drawer actuator must be lifted before inserting or removing the cable to avoid damage. No additional tools are required for cable insertion, but a suitable FPC/FFC cable with the correct pitch and pin count is necessary for use.
Typical Uses
Common applications include connecting displays to controller boards, linking PCB modules in compact devices, and wiring sensors or keypads in automotive, communications, medical, and consumer electronics. The right-angle design is particularly useful where vertical space is limited, such as in handheld devices or slim enclosures.
What's in the Box
One 1mm Pitch 30 Pin FPC/FFC SMT Drawer Connector.
Quick specs
- Manufacturer
- Generic
- Pitch Spacing (mm)
- 1
- No. of Contacts/Pins
- 30
- Voltage(V)
- 50
- Operating Current (A)
- 0.5
- Connection type
- ZIP-right Angle













