Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 1mm pitch, 4-pin surface-mount FFC/FPC connector with a drawer-style actuator that clamps flat cable in place. Its small 11mm by 2mm footprint suits tight boards where a reliable flat cable termination is needed.

Key Highlights

  • 1mm pitch with 4 contacts for narrow flat cable runs
  • Drawer-style actuator opens and closes for cable insertion
  • Surface-mount design keeps the connector low on the board
  • Phosphor bronze contacts with 20MΩ maximum contact resistance
  • Nylon 46 UL94-V0 insulation rated from -25°C to 85°C
  • Compact 11mm by 2mm body, approximately 1g each

Ideal For

  • Electronics technicians terminating flat cables on compact boards
  • Makers and prototypers building display or board-to-board links
  • Repair specialists replacing a damaged 1mm pitch connector
  • Product designers working on automotive, medical or consumer devices
  • Hobbyists who need a reopenable 4-pin flat cable connection

Buying Tip

Confirm that your flat cable has four conductors at 1mm pitch and that your board footprint matches the 11mm by 2mm body before soldering.

Elecvora expert review

Our verdict

A sensible small-format choice for 4-conductor flat cable work where space is tight and the connection may need to be reopened. The drawer actuator and 1mm pitch make it easy to work with, provided your cable and board footprint match.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Drawer actuator simplifies cable insertion and removal
  • Compact 11mm by 2mm body suits dense boards
  • Phosphor bronze contacts and flame-retardant nylon housing
  • Clear 50V and 0.5A ratings for low-power circuits

Cons

  • Requires surface-mount soldering equipment
  • Only suits 4-conductor cable at 1mm pitch
  • Not intended for high-current loads

Best for

Compact flat cable terminations and board-to-board links

Not ideal for

High-current power connections or cables with a different pitch

Specifications

ManufacturerGeneric
Pitch Spacing (mm)1
No. of Contacts/Pins4
Voltage(V)50
Operating Current (A)0.5
Contact MaterialPhosphor Bronze
Insulation MaterialNylon 46 UL94-V0
ColorBlack, Beige
Contact Resistance (ohm)20MΩ (Max)
Insulation Resistance (MOhm)800
Operating Temperature (°C)-25 to 85
Length (mm)11
Width (mm)2
Weight (g)1 (approx) (each)
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 1mm Pitch 4 Pin FPC FFC SMT Drawer Connector

Frequently Asked Questions

What cable does this connector accept?
It accepts flexible flat cable or flexible printed circuit cable with four conductors at 1mm pitch. The conductor spacing and count must match the connector.
How does the drawer-style actuator work?
Lift the actuator to open the contact row, insert the cable, then press the flap down to clamp it. This allows the cable to be removed and reinserted if needed.
What are the voltage and current limits?
The connector is rated for 50V and 0.5A operating current. Keep your circuit within these limits.
Is this a through-hole or surface-mount part?
It is a surface-mount connector, so it is soldered directly to board pads rather than through holes.
How many connectors are included?
The package contains one 1mm pitch 4 pin FPC/FFC SMT drawer connector.
What temperature range does it support?
The operating temperature range is -25°C to 85°C, which suits typical indoor electronics use.

Overview

This Generic connector is a 1mm pitch, 4-pin FPC/FFC surface-mount part with a drawer-style actuator. It is made for terminating flexible flat cables and for board-to-board links where a soldered ribbon or a larger connector would take up too much room. The body measures only 11mm by 2mm, so it fits into layouts where space is limited.

The drawer mechanism works by lifting the actuator, sliding the cable into the contact row and pressing the flap back down. This makes cable changes and rework easier than with fixed connectors, and the strengthened drawer-lock design helps hold the cable in position once closed.

Key Features

  • 1mm pitch with 4 contacts for compact flat cable connections
  • Drawer-style actuator for straightforward cable insertion and removal
  • Surface-mount termination for direct board mounting
  • Phosphor bronze contacts for stable electrical contact
  • Nylon 46 UL94-V0 insulation in black and beige
  • Rated for 50V and 0.5A operating current

Specifications Explained

Pitch and contacts: The 1mm pitch sets the spacing between the four contacts, so the connector accepts flat cable with matching 1mm conductor spacing and four conductors. Check your cable pitch and conductor count before ordering.

Electrical ratings: The 50V voltage rating and 0.5A operating current define the working limits for the connection. Contact resistance is 20MΩ maximum and insulation resistance is 800MΩ, which supports signal and low-power connections rather than high-current loads.

Materials and temperature: Phosphor bronze contacts provide the conductive path, while the nylon 46 UL94-V0 housing offers a flame-retardant insulation body. The operating range of -25°C to 85°C covers typical indoor electronics environments.

Size and weight: At 11mm long, 2mm wide and roughly 1g each, the connector adds very little bulk to a board.

Compatibility and Requirements

Use this connector with 4-conductor flexible flat cable or flexible printed circuit cable that matches the 1mm pitch. It is a surface-mount component, so it requires a board footprint that suits its 11mm by 2mm body and a suitable soldering process for SMT parts. The 50V and 0.5A ratings should be respected when selecting the circuit it will carry.

Typical Uses

This connector is useful for display terminations, board-to-board connections and other flat cable runs in automotive, communications, medical and consumer electronics products. It also suits prototype work and repair jobs where a small, reopenable cable connection is preferred.

What's in the Box

One 1mm pitch 4 pin FPC/FFC SMT drawer connector is included.

Quick specs

Manufacturer
Generic
Pitch Spacing (mm)
1
No. of Contacts/Pins
4
Voltage(V)
50
Operating Current (A)
0.5
Contact Material
Phosphor Bronze
See all specifications