Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This battery charger module is a good fit for makers, students and electronics hobbyists. Main specs: item type Battery Charger Module; battery type NiMH (Nickel Metal Hydride); input voltage (v) 3.7V / 3.8V / 4.5V / 5V DC (Recommended). Check that your power source supplies 3.7V / 3.8V / 4.5V / 5V DC (Recommended) before connecting it.

Key Highlights

  • Rechargeable over USB
  • Item Type: Battery Charger Module
  • Battery Type: NiMH (Nickel Metal Hydride)
  • Input Voltage (V): 3.7V / 3.8V / 4.5V / 5V DC (Recommended)

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeBattery Charger Module
Battery TypeNiMH (Nickel Metal Hydride)
Input Voltage (V)3.7V / 3.8V / 4.5V / 5V DC (Recommended)
Protection FeaturesOverheat Control, Timer Termination
Connector TypeXH2.54 Terminal
ApplicationPortable & Embedded Systems
Length (mm)30
Width (mm)15
Weight (g)02
Dimensions (L x W x H) mm170 x 130 x 130
InstallationTool-Free, Easy Replacement
Shipping Weight0.005 kg
Shipping Dimensions4 × 3 × 2 cm

Overview

The 1S 1.5V 1A NiMH Rechargeable Battery Charger Module with XH2.54 Terminal is listed in our battery charger module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Battery Charger Module (note the battery type so you can order spares or the right charger)
  • Battery Type: NiMH (Nickel Metal Hydride) (note the battery type so you can order spares or the right charger)
  • Input Voltage (V): 3.7V / 3.8V / 4.5V / 5V DC (Recommended) (match this to your power supply; too high a voltage can damage the part)
  • Protection Features: Overheat Control, Timer Termination
  • Connector Type: XH2.54 Terminal (confirm your cable or board uses the same connector)
  • Application: Portable & Embedded Systems (your supply must deliver at least this much current)
  • Length (mm): 30 (measure your mounting space before ordering)
  • Width (mm): 15 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The 1S NiMH Battery Charger Module Board is a compact and efficient charging solution designed specifically for single-cell (1S) 1.5V NiMH batteries, ensuring safe and controlled performance. It features precharge regulation to recover deeply discharged batteries while minimizing heat during the initial charging phase. The module operates using constant current and constant temperature control to maximize charging efficiency without overheating, enhancing overall battery safety and longevity. It also includes an automatic low-power sleep mode when the input power is removed to reduce energy consumption. With built-in maintenance charging and timer termination to prevent overcharging, along with a convenient XH2.54 terminal connector for secure and easy integration, this charger board is ideal for portable electronics, DIY projects, and embedded battery-powered systems.


Features:

  1. Designed for 1-Cell (1S) 1.5V NiMH batteries
  2. Wide DC input range: 3.5V–6V
  3. Stable 1A charging current output
  4. Precharge regulation for deeply discharged batteries
  5. Constant current and thermal regulation charging
  6. Automatic low-power sleep mode
  7. Maintenance charging with timer termination
  8. LED indicator for charging status
  9. Compact PCB design for easy integration
  10. XH2.54 terminal for secure battery connection
  11. Charging Method: Constant Current with Thermal Regulation
  12. Standby Mode: Automatic Low-Power Sleep

Package Includes:

1 x 1S 1.5V 1A NiMH Rechargeable Battery Charger Module with XH2.54 Terminal

Quick specs

Item Type
Battery Charger Module
Battery Type
NiMH (Nickel Metal Hydride)
Input Voltage (V)
3.7V / 3.8V / 4.5V / 5V DC (Recommended)
Protection Features
Overheat Control, Timer Termination
Connector Type
XH2.54 Terminal
Application
Portable & Embedded Systems
See all specifications