Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 2.4GHz NRF24L01+PA+LNA transceiver module with on-board amplifier and SMA antenna for longer-range wireless links. It connects over SPI to most microcontrollers and runs on a 3 to 3.6V supply.

Key Highlights

  • 2.4GHz license-free ISM band operation with 125 frequency points
  • +20dBm output power via on-board PA and LNA circuitry
  • Detachable SMA antenna with 11cm length and 2dBi gain
  • Receiver sensitivity down to -104dBm in 250kbps mode
  • SPI interface for straightforward MCU integration
  • Compact 49 x 16mm board weighing about 15g

Ideal For

  • Makers building wireless sensor networks
  • Students learning SPI-based radio communication
  • Hobby roboticists needing a low-cost control link
  • Engineers prototyping telemetry between microcontrollers
  • DIY remote monitoring projects

Buying Tip

Check that your power source can deliver a stable 3 to 3.6V at around 115mA, since the amplifier draws more current than a basic NRF24L01 board.

Elecvora expert review

Our verdict

A practical, affordable way to add a longer-range 2.4GHz link to a microcontroller project without designing RF hardware. The amplifier and SMA antenna make it more capable than a basic NRF24L01 board, provided the power supply is solid.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Higher output power and better sensitivity than an unamplified module
  • Detachable SMA antenna allows flexible placement
  • Standard SPI interface works with common microcontrollers
  • Low cost for the radio capability offered

Cons

  • Needs a stable 3 to 3.6V supply at around 115mA
  • Requires firmware configuration before use
  • Antenna must be attached before transmitting

Best for

Makers and engineers building low-cost 2.4GHz wireless links

Not ideal for

Users wanting a plug-and-play, no-code wireless solution

Specifications

Item TypeWireless Transceiver Antenna
Model No. / NameNRF24L01+PA+LNA
Operating Frequency (MHz)2400
Rated Voltage (VDC)3 to 3.5
Working Current (mA)115
Maximum output power (dBm)+20
Operating Range1
Antenna Gain2 dBi
Receiver Sensitivity-92dBm in 2Mbps mode -95dBm in 1Mbps mode -104dBm in 250kbps mode
PA growth (dB)20
LAN growth (dB)10
Noise (dB)2.6
Operating Temperature (°C)-20 to 70°C
Length (mm)49
Width (mm)16
Weight (g)15
Length of Antenna (cm)11
Interface TypeSPI
mode current (μA)4.2
Operating Voltage (VDC)3 ~ 3.6
Shipping Weight0.08 kg
Shipping Dimensions12 × 2 × 1 cm

What's in the box

  • 1 x 2.4GHz NRF24L01 Transceiver module
  • 1 x SMA Antenna

Frequently Asked Questions

What voltage does this module need?
It operates from 3 to 3.6VDC and draws about 115mA while working. Use a stable supply, as the on-board amplifier is sensitive to voltage dips.
How do I connect it to a microcontroller?
The module uses an SPI interface, so it connects to your MCU's SPI pins along with the required control lines. You will need to configure the radio in firmware.
Is the antenna included?
Yes, the package includes one SMA antenna along with the transceiver module. Fit the antenna before transmitting.
What range can I expect?
Range depends on data rate, antenna orientation and obstacles. The 250kbps mode gives the best receiver sensitivity at -104dBm, which supports longer links than the faster modes.
Does it work in the license-free band?
Yes, it operates in the 2.4GHz ISM band, which is license-free. Check your local rules for output power and antenna use before deploying.
What is the operating temperature range?
The module is rated for -20 to 70°C, so avoid enclosing it where temperatures fall outside that window.

Overview

The NRF24L01+PA+LNA is a 2.4GHz wireless transceiver module that combines the Nordic Semiconductor NRF24L01+ transceiver IC with an on-board power amplifier and low-noise amplifier. A reverse-polarity SMA connector and a detachable antenna are included, so the radio section can be positioned for better reception. Compared with a plain NRF24L01 board, the added PA and LNA stages raise output power to +20dBm and improve receive sensitivity, which helps extend the usable link distance in open air.

Key Features

  • Operates in the globally available, license-free 2.4GHz ISM band
  • On-board PA and LNA with +20dBm maximum output power
  • SPI interface for direct connection to a host microcontroller
  • Six-channel data reception and 125 frequency points
  • Selectable data rates of 2Mbps, 1Mbps and 250kbps
  • Compact board measuring 49 x 16mm and weighing about 15g

Specifications Explained

Output power: The +20dBm rating comes from the on-board amplifier, giving a stronger signal than an unamplified module. Sensitivity: the receiver is rated at -92dBm in 2Mbps mode, -95dBm in 1Mbps mode and -104dBm in 250kbps mode, so the slower data rate trades speed for reach. Power: the module needs 3 to 3.6VDC and draws about 115mA while active, with a standby current of roughly 4.2µA. Antenna: the supplied SMA antenna is 11cm long with 2dBi gain. Environment: operation is rated from -20 to 70°C.

Compatibility and Requirements

The module communicates over a standard SPI interface, so it can be driven by a microcontroller that provides SPI plus the required control pins. It needs a clean 3 to 3.6V supply capable of supplying the working current; an unstable or noisy supply can cause unreliable operation. The SMA antenna must be fitted before transmitting.

Typical Uses

Common applications include wireless sensor nodes, remote control links, telemetry for hobby robotics, short-range data logging and general point-to-point or multi-point communication projects where a low-cost 2.4GHz radio is sufficient.

What's in the Box

  • 1 x 2.4GHz NRF24L01 Transceiver module
  • 1 x SMA Antenna

Quick specs

Item Type
Wireless Transceiver Antenna
Model No. / Name
NRF24L01+PA+LNA
Operating Frequency (MHz)
2400
Rated Voltage (VDC)
3 to 3.5
Working Current (mA)
115
Maximum output power (dBm)
+20
See all specifications