
1 / 3 · Click to enlarge
AI Summary
A 20-pin straight female IDC socket on a 2.54mm pitch for terminating flat ribbon cable in one press-on step. Nickel-plated brass contacts and a UL94V-0 housing make it a dependable, easily replaced connection.
Key Highlights
- 20 female contacts on a standard 2.54mm pitch
- Straight orientation for edge-mating ribbon cable runs
- Brass contacts with nickel plating for stable conduction
- 3A current handling capacity per connector
- UL94V-0 rated black housing for flame resistance
- Operates from -40 to 105 degrees Celsius
Ideal For
- Electronics technicians repairing industrial control equipment
- Makers building ribbon-cable links between boards
- Prototype developers wiring multi-signal bench setups
- Maintenance teams replacing failed cable assemblies
- Hobbyists working with 2.54mm pitch ribbon cable
Buying Tip
Confirm your ribbon cable has exactly 20 conductors on 2.54mm centres and that you have an IDC press tool before ordering, since the joint is permanent once crimped.
Elecvora expert review
Our verdict
A straightforward, well-specified 20-pin IDC socket that does exactly what it should at a low cost. The nickel-plated brass contacts and UL94V-0 housing are sensible choices for general industrial and bench work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Standard 2.54mm pitch fits common ribbon cable and headers
- Nickel-plated brass contacts resist corrosion
- UL94V-0 housing and a wide -40 to 105 degrees Celsius range
- Very light at about 1 gram, so it will not stress a cable
Cons
- Requires an IDC press tool and 20-way ribbon cable, neither included
- Termination is permanent, so measure twice before crimping
- Only rated to 3A, which limits use in higher-power runs
Best for
General ribbon cable wiring, repairs and prototype links on a 2.54mm grid
Not ideal for
High-current power distribution or applications needing repeated re-termination
Specifications
| Manufacturer | Generic |
|---|---|
| Gender | Female |
| Pitch Spacing (mm) | 2.54 |
| Current Handle Capacity (A) | 3 |
| No. of Contacts | 20 |
| Connector Type | IDC |
| Contact Material | Brass |
| Contact Plating | Nickel |
| Operating Temperature (°C) | -40 to 105 |
| Flammability Rating | UL94V-0 |
| Color | Black |
| Length (mm) | 30 |
| Width (mm) | 7 |
| Weight (g) | 1 (approx) (each) |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 2.54mm DC3 20 Pin Straight Female IDC Socket
Frequently Asked Questions
What cable does this socket accept?
Is this a male or female connector?
How much current can it handle?
What is included in the package?
What temperature range does it support?
Can I reuse the connector after crimping?
Overview
This DC3 series socket is a 20-pin straight female IDC connector built around a 2.54mm pitch. IDC stands for insulation displacement contact: the metal terminals pierce the insulation of a flat ribbon cable and grip the conductor beneath, so an entire 20-way cable can be terminated in one operation instead of being stripped and soldered wire by wire. The result is a compact, repeatable joint that is simple to inspect and quick to replace.
The connector measures roughly 30mm long and 7mm wide and weighs about 1 gram, so it adds almost nothing to the weight or bulk of a cable assembly. The body is black and carries a UL94V-0 flammability rating.
Key Features
- Twenty female contacts arranged on a 2.54mm pitch
- Straight body style for direct edge mating
- Brass contacts with nickel plating
- 3A current handling capacity
- Operating temperature range of -40 to 105 degrees Celsius
- UL94V-0 rated black thermoplastic housing
Specifications Explained
Pitch and contact count
The 2.54mm pitch is the long-standing through-hole and ribbon cable standard, so this socket lines up with the familiar 0.1-inch grid used across prototyping boards, headers and many industrial interfaces. Twenty contacts means it accepts a 20-conductor flat cable.
Current capacity
A 3A rating describes what the connector is built to carry. Keep your expected load comfortably within that figure, and remember that the cable you attach has its own current limit.
Contact material and plating
Brass gives the terminals mechanical strength, while nickel plating provides a hard, corrosion-resistant surface that holds up to repeated handling and mildly hostile surroundings.
Temperature and flammability
The -40 to 105 degrees Celsius range covers most indoor equipment cabinets, outdoor enclosures and workshop environments. The UL94V-0 housing rating indicates the plastic is formulated to resist flame spread.
Compatibility and Requirements
This is a female IDC socket, so it mates with a corresponding 20-pin male header or plug on a 2.54mm pitch. Termination requires 20-conductor flat ribbon cable on 2.54mm centres and a suitable IDC press tool; neither the cable nor the tool is included. Plan your cable orientation before pressing, because IDC joints are intended to be permanent once closed.
Typical Uses
Common applications include internal wiring in industrial control cabinets, linking circuit boards where a removable connection is preferred, bench prototypes that need a tidy multi-wire link, and repair work where a failed ribbon assembly is simply unplugged and replaced. The enclosed contact design also suits dusty or contaminated environments better than exposed individual wires.
What's in the Box
- 1 x 2.54mm DC3 20 Pin Straight Female IDC Socket
Quick specs
- Manufacturer
- Generic
- Gender
- Female
- Pitch Spacing (mm)
- 2.54
- Current Handle Capacity (A)
- 3
- No. of Contacts
- 20
- Connector Type
- IDC













