
1 / 3 · Click to enlarge
AI Summary
This 2.54mm DC3 40-pin straight male IDC socket terminates 40-way ribbon cables for reliable board-to-cable connections. Its nickel-plated brass contacts and UL94V-0 housing make it a dependable choice for industrial and prototyping work.
Key Highlights
- 40-pin male IDC socket with 2.54mm pitch
- Brass contacts with nickel plating for conductivity
- 3A current capacity per contact
- Wide -40 to 105°C operating temperature range
- UL94V-0 rated black plastic housing
- Compact 58mm x 9mm body, 4g weight
Ideal For
- Electronics technicians building or repairing industrial control panels
- Makers and hobbyists working with ribbon cable assemblies
- Product developers prototyping multi-wire connections
- IT hardware enthusiasts modifying or repairing computer equipment
Buying Tip
Remember to order a matching 40-pin IDC ribbon cable and a crimp tool if you don't already own them, as the socket requires proper termination.
Elecvora expert review
Our verdict
A solid, no-frills IDC socket that does exactly what it should: terminate 40-way ribbon cable reliably. The nickel-plated brass contacts and UL94V-0 housing are appropriate for general industrial and prototyping use.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Standard 2.54mm pitch ensures broad compatibility
- Nickel-plated brass contacts resist corrosion
- UL94V-0 housing adds a layer of safety
- Wide temperature range suits diverse environments
- Lightweight and compact for dense layouts
Cons
- Requires an IDC crimp tool for proper installation
- Not waterproof, so needs protection in wet conditions
- Current rating limited to 3A per contact
Best for
Industrial control and prototyping projects using 40-way ribbon cable
Not ideal for
High-power or outdoor wet environments without additional protection
Specifications
| Manufacturer | Generic |
|---|---|
| Gender | Male |
| Pitch Spacing (mm) | 2.54 |
| Current Handle Capacity (A) | 3 |
| No. of Contacts | 40 |
| Connector Type | IDC |
| Contact Material | Brass |
| Contact Plating | Nickel |
| Operating Temperature (°C) | -40 to 105 |
| Flammability Rating | UL94V-0 |
| Color | Black |
| Length (mm) | 58 |
| Width (mm) | 9 |
| Weight (g) | 4 (each) |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 2.54mm DC3 40 Pin Straight Male IDC Socket
Frequently Asked Questions
What type of cable does this IDC socket work with?
Do I need a special tool to install it?
Can this connector handle power, or is it only for signals?
Is the connector waterproof?
What is included in the package?
What is the operating temperature range?
Overview
The Generic 2.54mm DC3 40 Pin Straight Male IDC Socket is a connector for terminating 40-conductor ribbon cables. It uses insulation displacement contact (IDC) technology, which pierces the cable insulation to make simultaneous connections with all 40 wires, saving time compared to individual soldering. The straight male configuration allows it to mate with corresponding female headers or transition connectors on a PCB. This socket is well suited to industrial environments where dust and mechanical stress are concerns, as the IDC termination creates a gas-tight connection that resists corrosion and vibration.
Key Features
- 40 contacts at 2.54mm pitch: Matches standard 0.1-inch prototyping and ribbon cable spacing.
- Brass contacts with nickel plating: Provides good electrical conductivity and resistance to oxidation.
- 3A current capacity: Suitable for low-power signal and control applications.
- UL94V-0 housing: Self-extinguishing plastic material for added safety.
- Wide temperature range: Operates from -40°C to 105°C, covering most indoor and sheltered outdoor installations.
- Compact dimensions: 58mm length and 9mm width fit neatly into tight spaces.
Specifications Explained
Pitch spacing of 2.54mm is the de facto standard for through-hole and ribbon cable connectors, so this socket will interface with common 0.1-inch headers and IDC ribbon cables. Current capacity of 3A per contact means the connector can handle typical signal-level currents and low-power distribution; it is not intended for high-power loads. Contact material is brass with nickel plating, offering a balance of durability and cost. The operating temperature range of -40 to 105°C ensures reliable performance in environments from cold storage to warm industrial cabinets. The UL94V-0 flammability rating indicates the plastic housing resists ignition and stops burning quickly if exposed to flame.
Compatibility and Requirements
This socket is designed for 40-way flat ribbon cable with 2.54mm conductor spacing. It mates with standard 40-pin male headers or IDC transition connectors. Proper termination requires an IDC crimp tool or a vice with suitable dies to press the cable into the contacts. No soldering is needed for the cable side, but the mating header on the PCB must be soldered or otherwise attached. The connector is not waterproof, so it should be protected from direct moisture.
Typical Uses
- Connecting ribbon cables between circuit boards in industrial control equipment
- Prototyping and breadboarding with 40-pin ribbon cables
- Repairing or replacing damaged IDC connectors in existing devices
- DIY electronics projects requiring multi-wire connections
- Computer and networking hardware modifications
What's in the Box
1 x 2.54mm DC3 40 Pin Straight Male IDC Socket.
Quick specs
- Manufacturer
- Generic
- Gender
- Male
- Pitch Spacing (mm)
- 2.54
- Current Handle Capacity (A)
- 3
- No. of Contacts
- 40
- Connector Type
- IDC













