
1 / 4 · Click to enlarge
At a glance
This vibration/tilt sensor and modules is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Tilt Sensor Module; output current (ma) 15mA; operating temperature (°c) 0°C to + 80°C.
Key Highlights
- Model No. / Name: Tilt Sensor Module
- Output Current (mA): 15mA
- Operating Temperature (°C): 0°C to + 80°C
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | Tilt Sensor Module |
|---|---|
| Output Current (mA) | 15mA |
| Operating Temperature (°C) | 0°C to + 80°C |
| Length (mm) | 50 |
| Width (mm) | 18 |
| Weight (g) | 6 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 8 × 6 × 2 cm |
Overview
The 2-Channel Tilt Sensor Module for Arduino is listed in our vibration/tilt sensor and modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Tilt Sensor Module
- Output Current (mA): 15mA (your supply must deliver at least this much current)
- Operating Temperature (°C): 0°C to + 80°C
- Length (mm): 50 (measure your mounting space before ordering)
- Width (mm): 18 (measure your mounting space before ordering)
- Weight (g): 6 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 8 × 6 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The tilt sensor module comes with the basic components for operation. Supplying power and it is good to be used. Attach it to object and it will detect whether the object is tilted. Simple usage as it is a digital output, so you will know the object is tilted or not by reading the output. It uses SW-460D or SW-520D tilt sensor. The tilt sensor is a ball rolling type.
It comes with an M3 mounting hole for ease of attaching it to any object. It provides a tilt switch, high sensitivity and commonly being used for tilt detection. The module comes with a power LED and a status LED for a visual indicator.
The module will output logic LOW when the module is not tilted until the threshold angle; it will output logic HIGH when it is tilted over the threshold angle. We have tested, the tilt angle is quite big, from 45 degrees to 130 degrees. However, it depends on the angular velocity too. It can be used as a vibration sensor too.
The output can be directly connected with the MCU, through the microcontroller to detect level, thereby detecting the environment change of angle. It can be interfaced with any microcontroller with digital input such as PIC, Arduino series for tilt detection capability.
Features:
- Operating voltage 3.3V-12V
- The output in the form: Digital switching outputs (0 and 1)
- A fixed bolt hole for easy installation
- Small board PCB size: 3.2cm x 1.7cm
- Wide voltage LM393 comparator
- Maximum output current: 15mA
- Can work on low voltages
- Maximum operating temperature: 0°C to + 80°C
- Easy interface
- Long life.
Package Includes: 1 x 2 Channel Tilt Sensor Module
Quick specs
- Model No. / Name
- Tilt Sensor Module
- Output Current (mA)
- 15mA
- Operating Temperature (°C)
- 0°C to + 80°C
- Length (mm)
- 50
- Width (mm)
- 18
- Weight (g)
- 6













