Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact plastic holder for two AAA cells wired in series to give 3V output, with a sliding screw-secured cover and a built-in on/off switch. Its 15 cm pre-tinned leads solder straight into small projects.

Key Highlights

  • Holds two 1.5V AAA cells in series for 3V output
  • Sliding cover secured with a small head screw
  • Built-in on/off switch controls power to the project
  • 15 cm leads with tinned tips for easy soldering
  • Compact plastic case measuring 62 x 15 x 25 mm
  • Lightweight at about 19 g for portable builds

Ideal For

  • Makers building small breadboard and prototype circuits
  • Students working on battery-powered electronics projects
  • Hobbyists assembling handheld gadgets and test devices
  • Repairers replacing a worn AAA holder in a compact enclosure
  • DIY builders needing a switchable 3V supply

Buying Tip

Check that your enclosure has room for the 62 x 15 x 25 mm case and that your circuit expects a 3V series supply before soldering the leads.

Elecvora expert review

Our verdict

A neat, low-cost solution for anyone who needs a switchable 3V supply from two AAA cells in a small space. The screw-secured cover and pre-tinned leads make it straightforward to install in a project box.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Integrated on/off switch saves adding a separate switch
  • Cover with screw fixing keeps cells secure
  • Pre-tinned 15 cm leads are ready to solder
  • Compact and lightweight case

Cons

  • Batteries are not included
  • Leads are bare wire, so soldering or a terminal block is required
  • Only suits AAA cells, not AA or other sizes

Best for

Small battery-powered DIY and prototype projects needing a switchable 3V supply

Not ideal for

Projects requiring higher voltage or larger cell sizes

Specifications

Item TypeBattery Holder
ColorBlack
Compatibility2 x 1.5V AAA Cell
Case MaterialPlastic
Internal ConnectionsSeries
Output Voltage3
ON/OFF SwitchYes
Cable Length15 cm
Dimensions (L x W x H) mm62 x 15 x 25
Weight (g)19
Shipping Weight0.022 kg
Shipping Dimensions10 × 4 × 2 cm

What's in the box

  • 1 x 2 x AAA battery holder with cover and on/off switch

Frequently Asked Questions

What batteries does this holder take?
It is designed for two 1.5V AAA cells. The cells are connected in series inside the case.
What output voltage does it provide?
With two fresh 1.5V AAA cells fitted, the holder delivers a combined output of approximately 3V.
Are batteries included?
No. The package contains only the battery holder with cover and on/off switch, so you will need to supply your own AAA cells.
How do I connect the holder to my circuit?
The holder has two 15 cm leads with tinned tips. Solder these to your circuit or clamp them in a terminal block, checking polarity first.
Does the switch cut power completely?
The on/off switch is wired into the output path, so it can interrupt power to your project without removing the batteries.
How do I change the batteries?
Remove the small head screw, slide the cover off, replace the cells and refit the cover and screw.

Overview

This battery holder is a small, self-contained way to power a project from two AAA cells. The cells sit in a series arrangement inside a black plastic case, so the two 1.5V batteries combine into a 3V output that leaves the holder through two 15 cm leads. A sliding cover, held in place by a small head screw, encloses the cells, and an on/off switch on the holder lets you interrupt the supply without opening the case.

At roughly 62 x 15 x 25 mm and 19 g, the holder suits compact enclosures, handheld devices and breadboard prototypes where a loose battery clip would be awkward.

Key Features

  • Accepts two 1.5V AAA cells in a series connection
  • Sliding cover with screw fixing to keep cells enclosed
  • Integrated on/off switch for controlling power
  • 15 cm leads with the final section tinned for soldering
  • Black plastic case with a slim, lightweight profile

Specifications Explained

Series connection and 3V output

Because the two AAA cells are wired in series, their voltages add together. Two fresh 1.5V cells therefore supply approximately 3V to the connected circuit, which is a common requirement for small electronics and sensor boards.

Switch and cover

The on/off switch sits in the output path, so you can leave the batteries installed and still shut the project down. The sliding cover is secured with a small head screw, which helps keep the cells in place during handling and transport.

Leads and dimensions

The two leads measure about 15 cm, with tinned tips that accept solder directly. The case measures 62 x 15 x 25 mm, so check the space inside your enclosure before fitting. Unit weight is about 19 g.

Compatibility and Requirements

The holder is designed for 2 x 1.5V AAA cells only. Batteries are not included, so you will need to supply your own AAA cells. The leads are bare tinned wire, which means the holder is intended for soldered connections or for clamping into a terminal block rather than for plugging into a connector.

Typical Uses

Makers and students use holders like this for small breadboard circuits, LED projects, sensor nodes and handheld test gadgets. The switch makes it convenient for devices that are used intermittently, and the enclosed case keeps the cells protected inside a project box.

What's in the Box

  • 1 x 2 x AAA battery holder with cover and on/off switch

Quick specs

Item Type
Battery Holder
Color
Black
Compatibility
2 x 1.5V AAA Cell
Case Material
Plastic
Internal Connections
Series
Output Voltage
3
See all specifications