
1 / 4 · Click to enlarge
AI Summary
A compact expansion board that holds up to two 18650 cells and delivers 5V/3A and 3V/1A outputs for Arduino, ESP32 and ESP8266 projects. Built-in overcurrent, overvoltage and undervoltage protection plus Micro USB charging make it a practical portable power source.
Key Highlights
- Holds up to two 18650 lithium cells for longer runtime
- Dual outputs: 5V at rated 3A and 3V at 1A
- Micro USB charging at 600mA to 800mA
- Built-in protection against overcurrent, overvoltage and undervoltage
- Works with battery voltages from 3.2V to 4.2V
- Clearly marked positive and negative battery terminals
Ideal For
- Makers building Arduino, ESP32 or ESP8266 prototypes
- Students learning portable power for electronics projects
- Hobbyists assembling battery-backed sensor nodes
- Anyone needing a compact 5V or 3V supply away from mains power
Buying Tip
Check the polarity markings on the board before inserting your 18650 cells, because reversed installation will permanently damage the module.
Elecvora expert review
Our verdict
A tidy, affordable way to add battery power to small Arduino and ESP projects, with two useful output rails and basic protection built in. It is simple rather than sophisticated, so treat the current ratings as limits to respect rather than targets to push.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Two output rails cover most small-board needs
- Built-in overcurrent, overvoltage and undervoltage protection
- Accepts two 18650 cells for longer runtime
- Compact 50mm board weighing about 38g
Cons
- 18650 batteries are not included
- Reversed cell installation will destroy the module
- Sustained loads near the maximum current shorten service life
Best for
Makers powering small Arduino, ESP32 or ESP8266 projects from 18650 cells
Not ideal for
High-draw devices that need sustained current above the rated outputs
Specifications
| Item Type | Lithium Battery Shield |
|---|---|
| Width (mm) | 50 |
| Weight (g) | 38 |
| Shipping Weight | 0.042 kg |
| Shipping Dimensions | 10 × 8 × 1 cm |
What's in the box
- 2 x 18650 Lithium Battery Shield V8 Mobile Power Expansion Board Module
Frequently Asked Questions
Does the board come with 18650 batteries?
What output voltages does it provide?
How do I charge the installed batteries?
What happens if I install the batteries the wrong way?
What battery voltage range does it support?
Can I use just one 18650 cell?
Overview
The Lithium Battery Shield V8 is a small expansion board that converts one or two 18650 lithium cells into a usable portable power supply. It is aimed at makers working with Arduino, ESP32 and ESP8266 boards, and at anyone who needs a battery-backed supply for a prototype or small gadget. The board measures 50mm across and weighs around 38g, so it adds very little bulk to a build.
Two outputs are available: a 5V rail rated at 3A and a 3V rail rated at 1A. Charging is handled through a Micro USB port at 600mA to 800mA. A built-in lithium battery protection IC provides overcurrent, overvoltage and undervoltage protection.
Key Features
- Accepts up to two 18650 lithium batteries for extended runtime
- 5V output with a rated current of 3A
- 3V output with a rated current of 1A
- Micro USB charging input at 600mA to 800mA
- Integrated protection IC for overcurrent, overvoltage and undervoltage
- Marked positive and negative terminals to guide correct cell installation
Specifications Explained
Outputs
The 5V rail is rated at 3A and can support up to 3.6A, though continuous overload is not recommended because it shortens the module's service life. The 3V rail is rated at 1A. Actual available current depends on the quality and condition of the 18650 cells you install.
Battery voltage
The board operates with battery voltages between 3.2V and 4.2V, which is the normal working range for 18650 lithium cells.
Charging
Charging takes place over Micro USB at 600mA to 800mA, so a standard USB power source is enough to recharge the installed cells.
Compatibility and Requirements
The module is intended for Arduino, ESP32 and ESP8266 projects and similar small electronics that accept a 5V or 3V supply. It requires 18650 lithium cells, which are not included, and a Micro USB cable for charging. Correct polarity matters: the board is marked positive and negative, and installing cells the wrong way round will burn out the module.
Typical Uses
- Portable power for Arduino, ESP32 and ESP8266 prototypes
- Battery-backed sensor nodes and small gadgets
- Bench testing where a mains supply is inconvenient
- Educational and hobby projects that need a compact 5V or 3V source
What's in the Box
Two Lithium Battery Shield V8 expansion board modules are included. Batteries and a Micro USB cable are not supplied.

Quick specs
- Item Type
- Lithium Battery Shield
- Width (mm)
- 50
- Weight (g)
- 38
- Shipping Weight
- 0.042 kg
- Shipping Dimensions
- 10 × 8 × 1 cm














