
1 / 5 · Click to enlarge
AI Summary
A rechargeable power bank shield for Arduino, ESP32, and ESP8266 projects that holds up to two 18650 cells and provides selectable 3V/1A or 5V/3A output. The onboard protection IC and Micro USB charging make it a convenient portable power solution.
Key Highlights
- Holds up to two 18650 lithium batteries for portable power
- Selectable 3V/1A and 5V/3A outputs via onboard button
- Built-in protection IC against overcurrent, overvoltage, and undervoltage
- Micro USB charging input at 600–800mA
- Compact 100mm x 90mm board weighs only 71g
- Designed for Arduino, ESP32, and ESP8266 development boards
Ideal For
- Makers building Arduino-based portable projects
- IoT developers using ESP32 or ESP8266
- Electronics students learning about power management
- DIY enthusiasts creating custom power banks
- RC hobbyists needing compact power for receivers
Buying Tip
Remember to purchase two 18650 batteries separately and double-check polarity before inserting them to avoid damaging the module.
Elecvora expert review
Our verdict
This battery shield offers a practical way to power Arduino and ESP projects from 18650 cells, with useful dual voltage outputs and built-in protection. It is a solid choice for makers who need a compact, rechargeable power solution and are comfortable handling bare cells.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Selectable 3V and 5V outputs cover a range of devices
- Integrated protection IC enhances safety
- Micro USB charging simplifies recharging
- Compact and lightweight design
Cons
- Batteries are not included
- Requires careful polarity observation to avoid damage
- Output current depends on battery quality
Best for
Makers and hobbyists needing portable power for Arduino, ESP32, or ESP8266 projects
Not ideal for
Users who want a ready-to-use power bank with included batteries
Specifications
| Item Type | Lithium Battery Shield |
|---|---|
| Output Port | USB or Expansion |
| Input Port | MicroUSB |
| Conversion efficiency | 0.95 |
| Length (mm) | 100 |
| Width (mm) | 90 |
| Weight (g) | 71 |
| Shipping Weight | 0.071 kg |
| Shipping Dimensions | 15 × 14 × 1 cm |
What's in the box
- 1 x 4 x 18650 Lithium Battery Shield V8 V9 for Arduino ESP32 ESP8266
Frequently Asked Questions
Does this shield come with 18650 batteries?
What is the maximum output current?
Can I use this with a single 18650 battery?
How do I switch between 3V and 5V output?
What happens if I install the batteries backwards?
What is the charging current?
Overview
The 4 x 18650 Lithium Battery Shield V8/V9 is a mobile power expansion board that turns two 18650 lithium cells into a regulated power source for your electronics projects. It is built for use with Arduino, ESP32, and ESP8266 boards, providing a convenient way to power your prototypes and devices without a wall adapter. The board features a Micro USB input for charging and offers two selectable voltage outputs, making it a versatile addition to any maker's toolkit.
Key Features
- Supports up to two 18650 lithium batteries (batteries not included)
- Two output modes: 3V at 1A and 5V at 3A (maximum 3.6A depending on battery quality)
- Onboard voltage switching button for easy selection between output levels
- Built-in lithium battery protection IC with overcurrent, overvoltage, and undervoltage safeguards
- Micro USB charging port with 600–800mA charging current
- Compact dimensions of 100mm x 90mm and a lightweight 71g design
Specifications Explained
The 3V/1A output is suitable for low-power sensors and logic circuits, while the 5V/3A output can drive more demanding loads such as motors or LED arrays. The actual current available depends on the quality and capacity of the 18650 batteries you install. The protection IC helps prevent damage from abnormal conditions, but always ensure batteries are installed with correct polarity as marked on the board. The Micro USB charging current of 600–800mA is typical for slow charging of 18650 cells; charging time will vary with battery capacity.
Compatibility and Requirements
This shield is designed for Arduino, ESP32, and ESP8266 development boards. It requires two 18650 lithium batteries (not included) to operate. The battery voltage should be within the normal range of 3.2V to 4.2V. The module outputs power through a USB port or expansion pins, allowing you to connect it to your project. Note that the product may come from different brands, and we will ship according to availability.
Typical Uses
- Portable power for Arduino-based sensor nodes
- Battery backup for ESP32 or ESP8266 IoT devices
- Powering small robots or RC projects
- Field testing of electronics without mains power
- Educational projects and DIY power banks
What's in the Box
Package includes one 4 x 18650 Lithium Battery Shield V8/V9 module. Batteries are not included.
Quick specs
- Item Type
- Lithium Battery Shield
- Output Port
- USB or Expansion
- Input Port
- MicroUSB
- Conversion efficiency
- 0.95
- Length (mm)
- 100
- Width (mm)
- 90














