
1 / 4 · Click to enlarge
AI Summary
A small push-button module that shows the charge level of a 2S 18650 lithium battery pack using four green LEDs. It reads roughly 25, 50, 75 or 100 percent and powers off automatically after about three seconds.
Key Highlights
- Four green LEDs show approximate 2S pack charge level
- Momentary trigger switch activates the display on demand
- Auto power-off after about three seconds of display
- Static current consumption of only 2 to 3 mA
- Compact board suited to tight battery compartments
- Simple wiring for DIY battery pack builds
Ideal For
- RC and FPV hobbyists running 2S 18650 packs
- Makers building custom portable power banks
- Electronics students learning about lithium pack monitoring
- Technicians who assemble and service 18650 battery packs
- DIY enthusiasts adding status displays to battery enclosures
Buying Tip
Confirm your pack is a 2S configuration before ordering, since this board is calibrated for 2S voltages and the 1S, 3S and 4S versions are separate variants.
Elecvora expert review
Our verdict
A genuinely handy little board for anyone working with 2S 18650 packs, since it replaces a multimeter check with a single button press. The low idle draw and automatic shut-off make it easy to live with in a finished build.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Four-level LED readout is quick and easy to interpret
- Auto power-off after about three seconds saves you a step
- 2 to 3 mA static draw is negligible in most builds
- Very small and light, so it fits tight spaces
Cons
- Only suits 2S packs, not other series configurations
- Wiring and mounting hardware are not included
- No numeric voltage readout, only stepped LED levels
Best for
Builders and hobbyists who want a fast visual charge check on 2S 18650 packs
Not ideal for
Users who need precise voltage numbers or multi-chemistry battery monitoring
Specifications
| Product Type | 2S 18650 Lithium Battery |
|---|---|
| Current consumption | 2~3 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 5 × 1 × 1 cm |
What's in the box
- 1 x 2S 18650 Lithium Battery Capacity Indicator Module Level Tester LED
Frequently Asked Questions
How do I read the charge level?
Does it work with any 18650 battery?
Will it drain my battery over time?
What voltages do the LED steps represent?
What is included with the module?
How should I care for the board?
Overview
The Generic 2S 18650 Lithium Battery Capacity Indicator Module is a small display board that turns a battery check into a single button press. Instead of reaching for a multimeter, you push the trigger switch and read the charge level from four green LEDs. The board is built for 2S 18650 lithium packs and is intended for builders, hobbyists and technicians who want a fast, repeatable way to see how much energy is left.
After roughly three seconds the display switches itself off, so there is no need to remember to turn it off. In static use the board draws only about 2 to 3 mA, which is negligible for most pack-monitoring purposes.
Key Features
- Four-level LED indication: each lit LED represents a step in the pack's charge state.
- Push-to-read operation: a slight press on the trigger switch starts the display.
- Automatic shut-off: the display ends by itself after about three seconds.
- Low static draw: 2 to 3 mA current consumption in idle state.
- Green LED output: clear, easy-to-read indication colour.
- Small footprint: shipping dimensions of 5 x 1 x 1 cm suit compact enclosures.
Specifications Explained
2S configuration
This module is made for 2S lithium packs, meaning two 18650 cells connected in series. The LED steps correspond to voltage thresholds of approximately 2.1 V, 4.2 V, 6.3 V and 8.4 V as the pack charges and discharges, so the reading reflects the pack's overall state rather than a single cell.
Current consumption
The 2 to 3 mA static figure describes the board at rest. It is a small number, which is why the module can be left connected in many builds without becoming a noticeable drain.
Size and weight
At roughly 5 x 1 x 1 cm and 0.02 kg shipping weight, the board fits into tight spaces and adds almost nothing to the finished assembly.
Compatibility and Requirements
The module is designed for 2S 18650 lithium battery configurations. It is a 2S-specific board, so it is not a substitute for the 1S, 3S or 4S versions of the same indicator family. Wiring and mounting hardware are not included, and the battery pack itself is not part of the package.
Typical Uses
- Checking charge state on custom 2S 18650 battery packs
- Adding a status readout to portable power and DIY electronics projects
- Quick pre-flight or pre-use checks on RC and FPV builds using 2S packs
- Bench testing and sorting cells during pack assembly
What's in the Box
1 x 2S 18650 Lithium Battery Capacity Indicator Module Level Tester LED.
Quick specs
- Product Type
- 2S 18650 Lithium Battery
- Current consumption
- 2~3
- Shipping Weight
- 0.02 kg
- Shipping Dimensions
- 5 × 1 × 1 cm













