Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 2S NiMH charger module that takes a DC 3.7V to 6V input and charges 2-cell packs at 3V and 1A. The XH2.54 terminal and LED status indicator make pack connections and charge checks quick and tool-free.

Key Highlights

  • Charges 2-cell (2S) NiMH battery packs at 3V and 1A
  • Accepts a DC input range of 3.7V to 6V
  • Thermal regulation and maintenance charging with timer termination
  • XH2.54 terminal for fast, tool-free pack connection
  • LED indicator shows charging status at a glance
  • Compact 30 x 10mm board weighing about 4g

Ideal For

  • RC hobbyists running 2-cell NiMH packs in small models
  • Makers building battery-powered DIY electronics projects
  • Anyone replacing a failed charger board inside a device
  • Users who want plug-in pack changes via XH2.54
  • Hobbyists maintaining several 2S NiMH packs

Buying Tip

Confirm your pack is a 2-cell (2S) NiMH type with an XH2.54 lead and that your DC supply sits within 3.7V to 6V before ordering.

Elecvora expert review

Our verdict

A tidy, purpose-built board for anyone charging 2-cell NiMH packs who wants a plug-in connection instead of clips and wires. The thermal regulation and timer-terminated maintenance mode are the details that make it worth choosing over a bare constant-current board.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Correct 3V output matched to 2S NiMH packs
  • Thermal regulation and timer-terminated maintenance charging
  • XH2.54 terminal allows tool-free pack swaps
  • Very small footprint at roughly 30 x 10mm and 4g
  • LED status indicator for quick charge checks

Cons

  • Input power supply is not included
  • Fixed 1A current is not adjustable for smaller packs
  • Only specified for 2-cell NiMH packs

Best for

Hobbyists and makers charging 2S NiMH packs in small devices and projects

Not ideal for

Users needing adjustable current or multi-chemistry charging

Specifications

Item TypeNiMH Battery Charger Module
Input Voltage (V)DC 3.7V – 6V
Charging Voltage3V
Charging Current1A
ProtectionThermal regulation & maintenance charging
Battery TypeNiMH (2-Cell / 2S)
Length (mm)30
Width (mm)10
Weight (g)04
Operating Voltage (V)2.7~5.5
Dimensions (L x W x H) mm170 x 130 x 130
InstallationTool-Free, Easy Replacement
Shipping Weight0.005 kg
Shipping Dimensions10 × 8 × 2 cm

What's in the box

  • 1 x 2S 3V 1A NiMH Rechargeable Battery Charger Module with XH2.54 Terminal

Frequently Asked Questions

What type of battery does this module charge?
It is designed for 2-cell (2S) NiMH battery packs and charges at 3V with a 1A current. Other chemistries are not specified for this module.
What input voltage does it need?
The module accepts a DC input from 3.7V to 6V, with an operating voltage window of 2.7V to 5.5V. The power supply is not included.
How do I connect the battery?
Use the onboard XH2.54 terminal. A pack lead with a matching XH2.54 connector plugs straight in, so no soldering is needed for that connection.
Does it stop charging automatically?
The module uses maintenance charging with timer termination, which ends the charge cycle rather than holding it indefinitely. Thermal regulation also manages board temperature during charging.
Is there an indicator for charging status?
Yes, an LED indicator on the module shows the charging status so you can see when a cycle is running.
What happens when I remove the input power?
The module automatically enters a low-power sleep mode when the power input is removed.

Overview

This module is a dedicated charger for 2-cell (2S) Nickel Metal Hydride battery packs. It takes a DC input between 3.7V and 6V and applies a 3V charge at 1A, giving small NiMH packs a steady, controlled top-up without a bench power supply and a tangle of clips. The board measures roughly 30mm by 10mm and weighs about 4g, so it can sit inside a model, enclosure or project box with minimal space cost.

Connection is handled by an XH2.54 terminal, which means a matching pack lead plugs in directly and can be swapped without soldering. An onboard LED reports charging status so you can see what the module is doing at a glance.

Key Features

  • Purpose-built for 2S NiMH: charging voltage and current are matched to 2-cell packs.
  • Thermal regulation: the module manages its own temperature during charging rather than running flat out.
  • Maintenance charging: timer termination ends the charge cycle instead of holding it indefinitely.
  • Precharge handling: deeply discharged packs are brought up gently at the start of a cycle.
  • Low-power sleep: the module drops into a low-power state when the input supply is removed.
  • Tool-free installation: the XH2.54 terminal makes replacement and pack changes straightforward.

Specifications Explained

Input and charging voltage

The input accepts 3.7V to 6V DC, while the operating voltage window is 2.7V to 5.5V. Charging output is fixed at 3V, which is the correct target for a 2-cell NiMH pack. Match your input supply to the stated range before connecting anything.

Charging current

At 1A, the module is aimed at packs that can accept a charge at that rate. Check your pack's own rating before use, since the module does not adjust current for pack capacity.

Size and weight

The board is 30mm long and 10mm wide, weighing approximately 4g. Shipping weight is listed at 0.005 kg in a 10 x 8 x 2 cm carton.

Compatibility and Requirements

The module is intended for NiMH packs configured as 2-cell (2S) only. It requires a separate DC power source within the 3.7V to 6V input range, which is not included. A pack lead terminating in an XH2.54 connector is needed to use the terminal. No other battery chemistries are specified for this module.

Typical Uses

Hobbyists and makers use modules like this where a 2-cell NiMH pack powers the device: small RC models, battery-backed gadgets, DIY electronics builds and project enclosures. Because the board is small and the terminal is plug-in, it also suits setups where packs are changed regularly rather than charged in place.

What's in the Box

  • 1 x 2S 3V 1A NiMH Rechargeable Battery Charger Module with XH2.54 Terminal

Quick specs

Item Type
NiMH Battery Charger Module
Input Voltage (V)
DC 3.7V – 6V
Charging Voltage
3V
Charging Current
1A
Protection
Thermal regulation & maintenance charging
Battery Type
NiMH (2-Cell / 2S)
See all specifications