Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 3A charger module for a single 18650 lithium cell, with a built-in battery box and 12V Type-C input. It charges fast, stops automatically at full capacity, and shows status with red and green LEDs.

Key Highlights

  • 3A charging current for fast single-cell 18650 top-ups
  • Built-in battery box holds the cell securely during charging
  • 12V Type-C input for modern power adapters and cables
  • Overcharge, over-discharge and short-circuit protection onboard
  • Red and green LEDs indicate charging and full status
  • Tiny 25 x 18 mm board weighing just 6 g

Ideal For

  • DIY electronics makers building compact single-cell power projects
  • Hobbyists who keep spare 18650 cells charged for testing
  • RC and FPV builders working with 18650-based power setups
  • Repairers and tinkerers who need a small bench charger
  • Anyone assembling portable power boxes with limited space

Buying Tip

Check that your Type-C power source can supply the current the module draws at 3A, and remember the 18650 cell and power adapter are sold separately.

Elecvora expert review

Our verdict

A tidy, purpose-built module for anyone who charges single 18650 cells regularly and wants a fast 3A cycle without wiring a holder by hand. The integrated battery box and Type-C input make it easy to use, provided you already own the cell and a suitable power source.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Fast 3A charging for a single 18650 cell
  • Built-in battery box simplifies cell handling
  • Type-C input matches modern cables and adapters
  • Automatic cut-off and protection circuitry
  • Very small and light for tight builds

Cons

  • Battery cell and power adapter are not included
  • Only supports one 1S 18650 cell at a time
  • No detailed datasheet or wiring documentation supplied

Best for

Makers and hobbyists charging single 18650 cells in compact projects

Not ideal for

Users who need to charge multiple cells or battery packs at once

Specifications

Output Voltage12
Output Current (A)3
Battery cell type1S
Charging Current3
Input PortUSB Type-C
Length (mm)25
Width (mm)18
Weight (g)6
Shipping Weight0.035 kg
Shipping Dimensions11 × 7 × 2 cm

What's in the box

  • 1 x 3A 18650 Lithium Battery Charger Module with Battery Box, 12V Type-C

Frequently Asked Questions

What type of battery does this module charge?
It is designed for a single 18650 lithium-ion cell in a 1S configuration. The cell is held in the built-in battery box.
Is a battery included?
No. The package contains only the charger module with battery box; the 18650 cell must be supplied separately.
What power source do I need?
The module has a USB Type-C input, so you need a Type-C cable and a compatible power adapter or power bank. The power source is not included.
How do I know when charging is finished?
The LED turns from red to green when the cell is fully charged. The module also cuts off charging automatically at full capacity.
Does it protect the battery?
Yes. The onboard circuitry is specified to protect against overcharging, over-discharging and short circuits.
How big is the module?
It measures approximately 25 mm by 18 mm and weighs about 6 g, making it suitable for small enclosures.

Overview

The Generic 3A 18650 Lithium Battery Charger Module combines a single-cell battery holder with a Type-C input and a 3A charging circuit on one small board. It is designed to charge one 18650 lithium-ion cell at a time, with the cell seated in the built-in battery box rather than wired in place. The board measures about 25 mm by 18 mm and weighs roughly 6 g, so it drops easily into compact enclosures, project boxes and portable builds.

Charging status is shown by two LEDs: red while the cell is charging and green once it is full. The circuit includes protection against overcharging, over-discharging and short circuits, and it stops charging automatically when the cell reaches full capacity.

Key Features

  • 3A charging current: charges a single 18650 cell faster than lower-current modules.
  • Built-in battery box: holds the cell securely and makes insertion and removal simple.
  • Type-C input: works with modern Type-C power adapters, cables and power banks.
  • Protection circuitry: guards against overcharge, over-discharge and short circuits.
  • Automatic cut-off: ends the charge cycle when the cell is full.
  • LED indicators: red for charging, green for charged.

Specifications Explained

Output and charging current

The module is rated for a 12V output and a 3A charging current. A higher charging current shortens the time needed to bring a cell back to full, which is useful when you charge regularly or work on time-sensitive builds. The 1S cell configuration means the board is intended for a single lithium-ion cell in series, matching the 18650 format.

Input and size

The input port is USB Type-C, so the module pairs with Type-C cables and adapters rather than older connector styles. Its 25 x 18 mm footprint and 6 g weight keep the board out of the way inside small projects, and the shipping weight of 0.035 kg reflects a light, easy-to-post item.

Compatibility and Requirements

This module is intended for one 18650 lithium-ion cell in a 1S configuration. It requires a Type-C power source to operate; the power adapter or power bank itself is not included. The cell is also not included, so you will need to supply your own 18650 battery. No other compatibility details are specified for this module.

Typical Uses

  • Charging a spare 18650 cell for DIY electronics projects.
  • Portable power builds that need a compact single-cell charger.
  • Bench testing and cell maintenance for hobbyists.
  • Small enclosures where board space is limited.

What's in the Box

1 x 3A 18650 Lithium Battery Charger Module with Battery Box, 12V Type-C.

Quick specs

Output Voltage
12
Output Current (A)
3
Battery cell type
1S
Charging Current
3
Input Port
USB Type-C
Length (mm)
25
See all specifications