
1 / 4 · Click to enlarge
AI Summary
A compact 3A single-cell 18650 charger module with an integrated battery box and USB Type-C input. It charges one cell quickly and switches off automatically when full, with red and green LEDs showing status.
Key Highlights
- 3A charging current for faster top-ups of a single 18650 cell
- USB Type-C input for modern cables and common power sources
- Integrated battery box holds the cell securely and simplifies swaps
- Automatic cut-off when the battery reaches full capacity
- Overcharge, over-discharge and short-circuit protection circuitry
- Red charging and green full-charge LED indicators
Ideal For
- Makers building single-cell 18650 power projects
- Hobbyists who need a quick charger for spare 18650 cells
- Repairers testing and maintaining loose lithium cells
- Students and beginners learning about lithium charging modules
- Anyone adding a Type-C charge point to a custom enclosure
Buying Tip
Check that your 18650 cell is rated to accept a 3A charge current, and pair the module with a USB Type-C power source that can supply it.
Elecvora expert review
Our verdict
A tidy, compact solution for charging one 18650 cell, with the battery box removing the need for separate holders. The 3A current and Type-C input make it convenient for modern DIY builds, provided your cell and power source can handle the current.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated battery box simplifies cell fitting and removal
- 3A charging current shortens charge times
- USB Type-C input matches current cables and adapters
- Automatic cut-off and protection circuitry support safe charging
- Very small and light for tight builds
Cons
- Only one 18650 cell can be charged at a time
- No USB cable or power adapter is stated as included
- Requires a cell and power source that suit a 3A charge current
Best for
Single-cell 18650 charging in DIY and portable projects
Not ideal for
Charging multiple cells or other battery sizes at once
Specifications
| Output Voltage | 5 |
|---|---|
| Output Current (A) | 3 |
| Battery cell type | 1S |
| Charging Current | 3 |
| Input Port | USB Type-C |
| Length (mm) | 25 |
| Width (mm) | 18 |
| Weight (g) | 6 |
| Shipping Weight | 0.035 kg |
| Shipping Dimensions | 11 × 7 × 2 cm |
What's in the box
- 1 x 3A 18650 Lithium Battery Charger Module with Battery Box, 5V Type-C
Frequently Asked Questions
What type of battery does this module charge?
How fast does it charge?
How do I know when charging is finished?
What power source should I use?
Is a battery or cable included?
Does it protect the battery?
Overview
This module pairs a single-cell 18650 lithium-ion charger board with an onboard battery box, giving you a self-contained charging point for one cell. Power comes in through a USB Type-C port, so a wall adapter, laptop or power bank can supply the input. The board delivers a 3A charging current, which is noticeably quicker than the 1A or 2A boards often used in small projects.
At roughly 25 mm by 18 mm and just 6 g, the module is small enough to build into enclosures, portable packs and bench rigs without taking up much room.
Key Features
- Fast 3A charging: reduces waiting time when you need a cell ready to go.
- Type-C input: uses the modern, reversible connector found on most current cables and chargers.
- Protection circuitry: helps prevent overcharging, over-discharging and short circuits.
- Automatic cut-off: charging stops once the cell is full, avoiding unnecessary stress.
- Battery box included: the cell seats securely and is easy to remove.
- LED status: red shows charging in progress, green shows a full battery.
Specifications Explained
Charging current and cell type
The 3A charging current applies to a single 1S lithium cell. Because the module is built for one 18650, you do not need to configure cell counts or balance leads. Higher current means shorter charge sessions, but the cell you use should be rated to accept that current comfortably.
Input and output
Input arrives through USB Type-C, and the board is listed with a 5V output. Match it with a USB power source that can sustain the charging current you intend to use.
Size and weight
The board measures 25 mm long and 18 mm wide and weighs 6 g, so it slips into tight builds. Shipping weight is 0.035 kg and shipping dimensions are 11 x 7 x 2 cm.
Compatibility and Requirements
The module is designed for a single 18650 lithium-ion cell in the 1S configuration and accepts power through its USB Type-C port. You will need a suitable USB Type-C power source and a compatible 18650 cell, neither of which is stated as included. No other cell sizes or chemistries are specified for this board.
Typical Uses
- Charging a spare 18650 cell for DIY electronics projects
- Building a small portable power pack with a single cell
- Bench testing and maintaining loose 18650 cells
- Adding a charge point to custom enclosures and prototypes
What's in the Box
1 x 3A 18650 Lithium Battery Charger Module with Battery Box, 5V Type-C.
Quick specs
- Output Voltage
- 5
- Output Current (A)
- 3
- Battery cell type
- 1S
- Charging Current
- 3
- Input Port
- USB Type-C
- Length (mm)
- 25













