Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact Type-C charger module for single-cell lithium batteries needing a 4.35V charge voltage, delivering up to 1A with CC/CV control. Thermal regulation, reverse connection protection and dual LED status indicators make charging straightforward.

Key Highlights

  • Type-C 5V input at 1A or higher
  • Preset 4.35V charge voltage with ±1% accuracy
  • 1A charging current with CC/CV control
  • Thermal regulation and reverse connection protection
  • Dual LEDs show charging and full status
  • Compact 27 x 11 mm board weighing about 3 g

Ideal For

  • Makers building portable electronics with single-cell lithium batteries
  • DIY battery pack builders using 4.35V cells
  • Embedded systems developers adding an integrated charger
  • Hobbyists repairing or replacing compact charging boards
  • RC and gadget builders needing a small 5V Type-C charging stage

Buying Tip

Confirm your cell is rated for a 4.35V charge voltage before buying, because this module is preset to 4.35V rather than the more common 4.2V.

Elecvora expert review

Our verdict

A tidy little charging board for builds that specifically use 4.35V single cells, with useful protections and clear status LEDs. It is simple and compact, but it is not a universal charger for every lithium cell.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Preset 4.35V output with ±1% accuracy
  • 1A CC/CV charging with thermal regulation
  • Reverse connection protection and soft-start limiting
  • Dual LEDs for charging and full status
  • Very small and light at 27 x 11 mm and about 3 g

Cons

  • Only suited to cells rated for 4.35V, not standard 4.2V cells
  • Requires a separate 5V Type-C supply rated at 1A or more
  • Single-cell charging only, not a multi-cell pack solution

Best for

Builders using single-cell 4.35V lithium batteries in compact projects

Not ideal for

Users charging standard 4.2V cells or multi-cell battery packs

Specifications

Item TypeBattery Charger Module
Power Supply Voltage (V)DC 5V ≥1A
Charging Voltage4.2V/4.35V
Charging Current1
Operating Temperature (°C)-40℃ to +85℃
Protection FeaturesThermal Regulation, Reverse Connection Protection
Length (mm)27
Width (mm)11
Weight (g)03
Sensor TypeStrain Gauge Based Load Cell
Operating Voltage (V)2.7~5.5
Dimensions (L x W x H) mm170 x 130 x 130
InstallationTool-Free, Easy Replacement
Shipping Weight0.005 kg
Shipping Dimensions10 × 8 × 1 cm

What's in the box

  • 1 x 4.35V 1A Lithium Battery Charger Module Type C (White Version)

Frequently Asked Questions

What battery type does this module charge?
It is designed for single-cell lithium-ion batteries that require a 4.35V charge voltage. Check your cell's rated charge voltage before use.
What power supply do I need?
Use a DC 5V Type-C supply rated at 1A or higher. A weaker supply may not support the full 1A charging current.
How do I know when charging is complete?
The module has dual LED indicators that show charging status and full-charge condition. Automatic recharge restarts charging when the voltage drops.
Does it protect against overheating?
Yes, thermal regulation limits heat during charging. The module is also rated for operation from -40°C to +85°C.
What is included with the module?
The package contains one 4.35V 1A Lithium Battery Charger Module Type C in the white version. No power supply or battery is included.
Can I use it with a 4.2V battery?
The module is preset to 4.35V, so it is intended for cells rated for that voltage. A 4.2V cell is not the intended match.

Overview

The Generic 4.35V 1A Lithium Battery Charger Module Type-C in white is a small charging board for single-cell lithium-ion batteries that are specified for a 4.35V charge voltage. Power it from a DC 5V Type-C source rated at 1A or more, and it charges at up to 1A using a constant current, constant voltage approach. The preset 4.35V output is held to ±1% accuracy, which keeps the charging profile consistent from one board to the next.

The module is intended for builders who want a dedicated charging stage inside a portable device, a DIY battery pack or an embedded system, rather than a full battery management system.

Key Features

  • Type-C 5V input: a common, convenient power connection for the module.
  • 1A charging current: suitable for charging single cells at a steady rate.
  • CC/CV charging: constant current then constant voltage for a controlled charge cycle.
  • 4.35V preset with ±1% accuracy: matched to cells that require this higher charge voltage.
  • Thermal regulation: limits heat build-up during charging.
  • Reverse connection protection: helps protect the module if the battery is connected the wrong way.
  • Dual LED indicators: show charging and full-charge status at a glance.
  • Automatic recharge and soft-start: resumes charging after voltage drop and limits inrush current at startup.

Specifications Explained

Power supply voltage: the board expects DC 5V and at least 1A from the supply. A weaker source may not support the full charging current.

Charging voltage: the module is set for 4.35V. Use it only with single-cell lithium batteries that are rated for this charge voltage; a 4.2V cell is not the intended match.

Charging current: 1A is the module's charging current. Confirm your cell and wiring can handle this rate before use.

Operating temperature: the module is rated from -40°C to +85°C, so it can be used in a wide range of environments.

Size and weight: the board measures 27 mm by 11 mm and weighs about 3 g, so it fits into tight enclosures and adds little mass to a build.

Compatibility and Requirements

The module is designed for single-cell lithium-ion batteries that require a 4.35V charge voltage. It needs a DC 5V Type-C power supply capable of at least 1A. No other compatibility details are specified in the product data, so check your cell's rated charge voltage before connecting it.

Typical Uses

  • Portable electronics with an internal single-cell battery
  • DIY battery packs built around 4.35V cells
  • Embedded systems and small projects needing an integrated charger
  • Repair or replacement charging stages in compact devices

What's in the Box

1 x 4.35V 1A Lithium Battery Charger Module Type C (White Version).

Quick specs

Item Type
Battery Charger Module
Power Supply Voltage (V)
DC 5V ≥1A
Charging Voltage
4.2V/4.35V
Charging Current
1
Operating Temperature (°C)
-40℃ to +85℃
Protection Features
Thermal Regulation, Reverse Connection Protection
See all specifications