Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This pack of two back-to-back AA battery holders features a spring clip design and 140 mm wires for easy battery installation. Each lightweight holder securely carries four AA cells for DIY electronics and RC projects.

Key Highlights

  • Pack of two holders for four AA batteries each
  • Back-to-back configuration saves space in compact builds
  • Spring clip design for quick and tool-free battery changes
  • Pre-attached 140 mm wires simplify wiring
  • Lightweight at approximately 9 g per holder
  • Compact dimensions: 54 x 31 x 29 mm

Ideal For

  • DIY electronics hobbyists building portable projects
  • RC modelers needing compact battery packs
  • Students and educators creating science kits
  • Makers prototyping battery-powered devices
  • Repair technicians replacing faulty battery holders

Buying Tip

Check that the 54 x 31 x 29 mm dimensions fit your enclosure, and remember that batteries and connectors are not included.

Elecvora expert review

Our verdict

These holders offer a convenient, lightweight way to power projects with four AA batteries, and the two-pack adds value. The pre-attached wires and spring clip design make them user-friendly for beginners and experienced makers alike.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact back-to-back layout saves space
  • Pre-wired for quick installation
  • Lightweight and easy to mount
  • Spring clip simplifies battery changes
  • Two holders included for the price

Cons

  • Batteries not included
  • Wires require soldering or connectors for secure attachment

Best for

DIY electronics and RC projects needing a compact 4xAA power source

Not ideal for

Applications requiring high-current or rechargeable battery packs with built-in protection

Specifications

Item TypeBattery Holder
CompatibilityAA Battery
Length (mm)54
Width (mm)31
Wire Length (mm)140
Weight (g)9(each)
Shipping Weight0.01 kg
Shipping Dimensions12 × 9 × 3 cm

What's in the box

  • 2 x 4 x AA Battery Back to Back Holder Case Box with wires

Frequently Asked Questions

What type of batteries does this holder accept?
It is designed for standard AA batteries. It will not fit AAA, C, or D cells.
Are batteries included?
No, the package includes only the two battery holders. Batteries must be purchased separately.
What is the wire length and how do I connect them?
The wires are approximately 140 mm long and come bare-ended. You can solder them to your circuit or use connector blocks.
Can I use rechargeable AA batteries?
Yes, the holder is compatible with any AA-sized battery, including rechargeable NiMH cells, as long as they are within the physical dimensions.
How do I install the batteries?
The spring clip design allows you to flex the holder open, insert the batteries according to the polarity markings, and release the clip to secure them.
What are the dimensions of each holder?
Each holder measures approximately 54 mm in length, 31 mm in width, and 29 mm in height.

Overview

The Generic 4 x AA Battery Back to Back Holder Case Box is a practical solution for powering your electronics projects with standard AA batteries. This pack includes two holders, each designed to accommodate four AA cells in a back-to-back layout, which helps save space in tight enclosures. The holders come with pre-soldered wires measuring approximately 140 mm, so you can connect them directly to your circuit without additional soldering to the holder itself. The spring clip mechanism makes battery insertion and removal straightforward, and the lightweight construction (about 9 g per holder) ensures minimal added weight to your build.

Key Features

  • Dual Pack: Two holders included, offering value and a spare for multiple projects.
  • Back-to-Back Design: Holds four AA batteries in a compact arrangement, ideal for space-constrained applications.
  • Spring Clip: Securely holds batteries while allowing easy replacement.
  • Pre-Wired: 140 mm wire leads are ready for connection, reducing assembly time.
  • Lightweight: Each holder weighs only about 9 g, keeping your project portable.

Specifications Explained

Compatibility: Designed specifically for AA batteries, these holders accept standard AA cells. Dimensions: Each holder measures approximately 54 mm in length, 31 mm in width, and 29 mm in height, giving you a clear idea of the footprint. Wire Length: The 140 mm wires provide ample length for routing to your power input or switch. Weight: At just 9 g per holder, they add negligible weight to your device. Shipping: The package ships at 0.01 kg with dimensions of 12 x 9 x 3 cm, ensuring low shipping cost and easy handling.

Compatibility and Requirements

These holders are compatible with AA batteries only. They do not include batteries, so you will need to supply your own. The wire leads are bare-ended, requiring you to connect them to your circuit, typically by soldering or using a connector block. No additional mounting hardware is included.

Typical Uses

These battery holders are ideal for DIY electronics projects, RC models, portable gadgets, and educational kits. They can be used to create battery packs for robots, LED lighting, small motors, and sensor nodes. The back-to-back configuration is particularly useful when you need to fit four AA cells into a narrow space.

What's in the Box

The package includes two 4 x AA battery back-to-back holders with wires. Batteries are not included.

Quick specs

Item Type
Battery Holder
Compatibility
AA Battery
Length (mm)
54
Width (mm)
31
Wire Length (mm)
140
Weight (g)
9(each)
See all specifications