
1 / 5 · Click to enlarge
AI Summary
This is a circular polarized 5.8G FPV antenna pair with RP-SMA male plugs, including one TX and one RX antenna. The set improves wireless video range and coverage while the protected dome design keeps the antennas safe and easy to install.
Key Highlights
- Circular polarized TX and RX antenna pair for 5.8GHz FPV
- 3 dBi gain and SWR below 1.5 for efficient signal transfer
- RP-SMA male plugs fit standard FPV transmitters and receivers
- RF-transparent domes protect the antenna elements
- Bendable design for flexible positioning
- Lightweight set, easy to install on quads and ground stations
Ideal For
- FPV drone pilots seeking better video range
- RC hobbyists upgrading stock antennas
- Ground station setups for FPV monitoring
- Builders of 5.8GHz video transmitters and receivers
Buying Tip
Verify that your FPV transmitter and receiver have RP-SMA female connectors before ordering, as this set uses RP-SMA male plugs.
Elecvora expert review
Our verdict
This antenna pair offers a straightforward upgrade for FPV pilots using RP-SMA connectors, with protected domes and a bendable design that simplifies installation. It delivers the expected benefits of circular polarization without adding complexity.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Includes both TX and RX antennas for a complete link
- Protected dome design increases durability
- Bendable stems allow flexible positioning
- Standard RP-SMA connectors fit many FPV devices
Cons
- Only compatible with RP-SMA female ports; adapters needed for SMA
- No specific compatibility list provided, so users must verify connectors
Best for
FPV pilots with RP-SMA equipped video systems
Not ideal for
Users with SMA connectors or non-5.8GHz systems
Specifications
| Item Type | Antenna |
|---|---|
| Connector Type | RP-SMA |
| Connector gender | Male |
| Gain | 3 |
| SWR | <1.5 |
| Shipping Weight | 0.08 kg |
| Shipping Dimensions | 10 × 6 × 3 cm |
What's in the box
- 1 x TX circular polarized antenna (RP-SMA Male Connector)
- 1 x RX circular polarized antenna (RP-SMA Male Connector)
Frequently Asked Questions
What is included in the package?
Will this antenna work with my FPV transmitter?
Do I need to power the antennas?
Can I use these antennas on other frequencies?
How should I care for the antennas?
Overview
The 5.8G FPV Petals Clover Mushrooms L Antenna set is a circular polarized antenna pair built for FPV video transmitters and receivers. It includes two antennas with RP-SMA male plugs: a three-lobe TX antenna and a four-lobe RX antenna, each housed in an RF-transparent dome. This design protects the antenna elements while giving your gear a clean, finished look. The bendable construction makes it easy to position the antennas for best reception, and the standard RP-SMA connectors ensure compatibility with many FPV systems.
Key Features
- Circular Polarized Pair: One TX and one RX antenna work together to improve video signal quality and range.
- Protected Dome Design: RF-transparent domes shield the petals from damage without blocking signal.
- Bendable and Flexible: Adjust the antenna angle to suit your mounting position.
- Standard RP-SMA Male Plugs: Fits common FPV transmitters and receivers with RP-SMA female connectors.
- Efficient Performance: 3 dBi gain and SWR below 1.5 help minimize signal loss.
Specifications Explained
Gain (3 dBi): This moderate gain focuses the signal slightly, which can help extend range compared to lower-gain stock antennas. SWR (<1.5): A standing wave ratio below 1.5 indicates efficient power transfer from your transmitter to the antenna, reducing reflected power and potential heat. Connector Type (RP-SMA Male): The RP-SMA male plug has a threaded outer shell and a socket center, which mates with RP-SMA female jacks commonly found on FPV video transmitters and receivers. Always check your device's connector before purchase.
Compatibility and Requirements
This antenna set is designed for 5.8GHz FPV video systems with RP-SMA female connectors on the transmitter and receiver. The package includes both TX and RX antennas, so you can set up a complete link. No additional adapters are included. Ensure your devices use RP-SMA female connectors; SMA connectors are not compatible without an adapter.
Typical Uses
Use this antenna pair on FPV racing quads, freestyle drones, or ground stations to improve video range and clarity. It is also suitable for other 5.8GHz wireless video applications where circular polarization is beneficial.
What's in the Box
The package includes one TX circular polarized antenna and one RX circular polarized antenna, both with RP-SMA male connectors.
Quick specs
- Item Type
- Antenna
- Connector Type
- RP-SMA
- Connector gender
- Male
- Gain
- 3
- SWR
- <1.5
- Shipping Weight
- 0.08 kg













