
1 / 2 · Click to enlarge
At a glance
This battery charger module is a good fit for makers, students and electronics hobbyists. Main specs: charging voltage DC 4.6V–8V; charging current 0–1; output current (a) 0–1.2. Check that your power source supplies DC 4.6V–8V before connecting it.
Key Highlights
- Charging Voltage: DC 4.6V–8V
- Charging Current: 0–1
- Output Current (A): 0–1.2
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Charging Voltage | DC 4.6V–8V |
|---|---|
| Charging Current | 0–1 |
| Output Voltage | 5 V |
| Output Current (A) | 0–1.2 |
| Efficiency | 78%–90%(Discharge Efficiency) |
| Operating Temperature (°C) | -40°C to +85°C |
| Length (mm) | 27 |
| Width (mm) | 15 |
| Weight (g) | 04 |
| Operating Voltage (V) | 2.7~5.5 |
| Dimensions (L x W x H) mm | 170 x 130 x 130 |
| Installation | Tool-Free, Easy Replacement |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 8 × 6 × 2 cm |
Overview
The 5V 2 in 1 Charge and Discharger Boost Modules with Soldering is listed in our battery charger module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Charging Voltage: DC 4.6V–8V (check which plug or cable it needs)
- Charging Current: 0–1 (check which plug or cable it needs)
- Output Voltage: 5 V (match this to your power supply; too high a voltage can damage the part)
- Output Current (A): 0–1.2 (your supply must deliver at least this much current)
- Efficiency: 78%–90%(Discharge Efficiency)
- Operating Temperature (°C): -40°C to +85°C
- Length (mm): 27 (measure your mounting space before ordering)
- Width (mm): 15 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The 5V 2 in 1 Charge and Discharger Boost Module is a compact solution designed for charging and boosting single-cell lithium batteries. It supports DC 4.6V–8V input (5V recommended) with up to 1A charging current and provides regulated 5V output up to 1.2A. The module features LED indicators for charging and full-charge/fault status, ensuring easy monitoring. With discharge current up to 2A and conversion efficiency of 78%–90%, it is ideal for portable DIY electronics. Suitable for embedded and battery-powered applications.
Features:
- 2-in-1 charging and boost conversion module
- DC 4.6V–8V input (5V recommended)
- Charging current up to 1A
- 5V output up to 1.2A
- 78%–90% discharge efficiency
- Dual LED status indicators (CR & OK)
Package Includes:
1 x 5V 2 in 1 Charge and Discharger Boost Modules with SolderingQuick specs
- Charging Voltage
- DC 4.6V–8V
- Charging Current
- 0–1
- Output Voltage
- 5 V
- Output Current (A)
- 0–1.2
- Efficiency
- 78%–90%(Discharge Efficiency)
- Operating Temperature (°C)
- -40°C to +85°C













