
1 / 5 · Click to enlarge
AI Summary
This 6x8mm 330uH DIP power inductor is a through-hole choke coil rated for 0.3A with 10% tolerance. Its compact size and low 0.95mΩ DC resistance make it useful for DC/DC converters and general filtering.
Key Highlights
- 330uH inductance with 10% tolerance for predictable filtering
- Through-hole DIP mounting for secure PCB installation
- 0.3A current rating suits low-power DC/DC circuits
- Low 0.95mΩ DC resistance minimizes power loss
- Magnetically shielded to reduce flux leakage
- Compact 9mm length and 6mm width saves board space
Ideal For
- Electronics technicians repairing desktop or laptop motherboards
- Makers building DC/DC converter circuits
- Students learning through-hole soldering and power electronics
- Designers prototyping VRM or distributed power systems
- Hobbyists needing a compact, shielded inductor for general filtering
Buying Tip
Verify that your circuit's continuous current stays below 0.3A and that the 330uH value suits your filtering frequency before ordering.
Elecvora expert review
Our verdict
This 330uH DIP power inductor offers a practical combination of compact size, magnetic shielding, and low DC resistance for low-current through-hole applications. It is a solid choice for repairs and prototypes where a reliable, RoHS-free choke coil is needed.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Magnetically shielded to reduce interference
- Low 0.95mΩ DC resistance for efficient operation
- Compact 9mm x 6mm footprint saves board space
- Through-hole mounting for secure mechanical connection
- RoHS free construction
Cons
- Current rating of 0.3A limits use to low-power circuits
- Inductance tolerance of 10% may be too wide for precision filtering
- Not suitable for high-frequency applications beyond 1000Hz reference
Best for
Low-power DC/DC converters and motherboard repairs
Not ideal for
High-current power supplies or precision tuned circuits
Specifications
| Inductance | 330uH |
|---|---|
| Tolerance (%) | 10 |
| Mounting Type | Through Hole |
| Current Rating (A) | 0.3 |
| Frequency (Hz) | 1000 |
| Operating Temperature (°C) | -40 to 85 |
| Length (mm) | 9 |
| Width (mm) | 6 |
| Weight (g) | 1 (approx) (each) |
| DC Resistance(mΩ) | 0.95 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 6*8mm 330uH DIP Power Inductor
Frequently Asked Questions
What is the inductance value and tolerance of this inductor?
Can this inductor be used in high-current applications?
Is this component RoHS compliant?
What is the operating temperature range?
How many inductors are included in the package?
What is the DC resistance of this inductor?
Overview
The 6x8mm 330uH DIP power inductor is a wire-wound choke coil built for through-hole mounting on printed circuit boards. It provides 330 microhenries of inductance with a 10% tolerance, making it a dependable choice for filtering and energy storage in low-current power circuits. The inductor measures 9mm in length and 6mm in width, with a typical weight of 1 gram per piece, so it fits easily into densely packed designs.
This component is magnetically shielded to limit magnetic flux leakage, which helps maintain circuit performance and reduces interference with nearby parts. It is RoHS free and operates across a temperature range of -40°C to 85°C, covering most common electronic environments.
Key Features
- 330uH inductance: Provides substantial filtering for power supply lines and DC/DC converters.
- 10% tolerance: Ensures consistent performance across production runs.
- 0.3A current rating: Suitable for low-power applications such as motherboard VRMs and distributed power systems.
- Low DC resistance: At 0.95mΩ, it minimizes resistive losses and helps maintain efficiency.
- Through-hole DIP mounting: Offers a strong mechanical bond and easy soldering on prototyping boards.
- Compact dimensions: 9mm length and 6mm width allow installation in tight spaces.
- Magnetically shielded: Reduces flux leakage for cleaner circuit behavior.
- RoHS free: Complies with restrictions on hazardous substances.
Specifications Explained
Inductance (330uH): This value determines how much energy the inductor can store and how strongly it opposes changes in current. It is well suited for filtering low-frequency ripple in power supplies.
Tolerance (10%): The actual inductance may vary by ±10% from the nominal 330uH, which is typical for general-purpose power inductors and acceptable for most filtering tasks.
Current Rating (0.3A): The inductor can handle up to 0.3 amps of continuous current. Exceeding this may cause saturation or overheating.
DC Resistance (0.95mΩ): This low resistance means very little voltage drop and power loss across the inductor, improving overall efficiency.
Operating Temperature (-40°C to 85°C): The component is designed to function reliably in cold and moderately hot conditions, covering most indoor and protected outdoor electronics.
Frequency (1000Hz): The rated frequency of 1000Hz indicates a reference point for performance; the inductor is intended for use in circuits operating around this frequency or lower.
Compatibility and Requirements
This inductor is a through-hole component, so it requires a PCB with plated holes and enough clearance for the 9mm by 6mm body. It is intended for soldering with standard electronics tools. No additional accessories are required for installation. The 0.3A current rating means it should be paired with circuits that do not exceed this current under normal operation.
Typical Uses
- DC/DC converters in distributed power systems
- Voltage regulator modules (VRM) on motherboards
- General-purpose filtering in power supply lines
- Laptop and desktop motherboard power circuits
- Prototyping and educational electronics projects
What's in the Box
One 6x8mm 330uH DIP power inductor is included.
Quick specs
- Inductance
- 330uH
- Tolerance (%)
- 10
- Mounting Type
- Through Hole
- Current Rating (A)
- 0.3
- Frequency (Hz)
- 1000
- Operating Temperature (°C)
- -40 to 85













