Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A pre-assembled 65mm metal front or rear shock absorber for RC cars, weighing just 8g. Its aluminum body and heavy-duty spring add light, reliable damping without a rebuild.

Key Highlights

  • 65mm eye-to-eye length for front or rear RC car use
  • Metal and plastic construction with a heavy-duty spring
  • Lightweight at approximately 8g per shock
  • Comes pre-assembled for a straightforward swap
  • Includes hollow steel flanged balls and M2 x 12 screws
  • Compact 14mm body diameter suits small-scale setups

Ideal For

  • RC hobbyists replacing a worn or bent 65mm shock
  • Owners of small-scale RC cars and buggies
  • Bashers who keep spare dampers on hand
  • Builders assembling or repairing a 65mm shock setup

Buying Tip

Measure your existing shock eye-to-eye and check the 14mm body clearance before ordering, and allow for roughly 1 to 2mm of dimensional variation.

Elecvora expert review

Our verdict

A sensible, low-cost replacement damper for RC cars that use a 65mm shock. It is light, pre-assembled and comes with the small mounting parts you need, though you must confirm the size and clearance first.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Pre-assembled for quick replacement
  • Light 8g weight
  • Metal and plastic body with heavy-duty spring
  • Includes flanged balls and mounting screws

Cons

  • Only suits cars that use a 65mm shock length
  • Small dimensional variation of about 1 to 2mm is possible
  • No specific vehicle models are listed for fitment

Best for

Replacing a worn or damaged 65mm shock on a small RC car

Not ideal for

Cars that use a different shock length or need a larger body diameter

Specifications

Item TypeAccessory
Model No. / NameShock Absorber
MaterialMetal and plastic
Length (mm)65
Width (mm)14 (Body Diameter)
Weight (g)8
Shipping Weight0.012 kg
Shipping Dimensions2 × 2 × 2 cm

What's in the box

  • 1 x 65mm Metal Front/Rear Shock Absorber for RC Car
  • 2 x Hollow Steel Flanged Ball
  • 2 x Philips M2 x 12 Screws

Frequently Asked Questions

What length is this shock absorber?
It is a 65mm shock absorber with a 14mm body diameter. Check your car's existing shock length before ordering.
Does it come assembled?
Yes, the shock absorber arrives pre-assembled. The package also includes hollow steel flanged balls and M2 x 12 Philips screws.
Can I use it on the front and rear?
It is described as a front/rear shock absorber, so it can be used at either end where a 65mm shock is specified. Confirm clearance and mounting on your model.
How much does it weigh?
Each shock weighs approximately 8g, which keeps it light for small-scale RC cars.
Will it fit my specific RC car model?
No specific vehicle models are listed. Fitment depends on matching the 65mm length, the 14mm body diameter and the mounting points.
How should I care for it?
Keep the shock clean and check the spring and mounting screws regularly. Replace it if the body is bent or the damping feels inconsistent.

Overview

This 65mm metal front/rear shock absorber is a replacement damper for remote control cars that run a 65mm shock length. It combines a metal and plastic body with a heavy-duty spring, offering a balance of light weight and dependable shock absorption. At around 8g per unit, it adds minimal mass to a small-scale chassis while still helping to control bumps and landings.

The shock arrives fully assembled, which makes it a practical spare for hobbyists who would rather replace a damaged damper than rebuild one. Whether you are refreshing a tired basher or keeping parts on hand for repairs, this absorber is a simple drop-in option.

Key Features

  • 65mm length: sized for RC cars that use a 65mm shock absorber.
  • Metal and plastic build: a durable body paired with a heavy-duty spring.
  • Light 8g weight: keeps the suspension setup close to stock.
  • Pre-assembled: ready to install without a rebuild.
  • Front or rear fitment: can be used at either end where 65mm shocks are specified.
  • Mounting hardware included: hollow steel flanged balls and M2 x 12 Philips screws.

Specifications Explained

Length and diameter

The 65mm length is the key figure to check against your car's existing shock. The body diameter is 14mm, so confirm there is enough clearance in the suspension arm and around nearby components. Small dimensional variation of roughly 1 to 2mm is possible, so measure your current part before ordering.

Weight

At about 8g, the absorber is light enough for small-scale RC cars where every gram affects handling. Lighter dampers can help keep the suspension responsive without adding unnecessary mass.

Materials and spring

The metal and plastic construction supports the spring and damping action, while the heavy-duty spring is intended to handle regular off-road and on-road use. The combination is designed to provide shock absorption while keeping the unit light.

Compatibility and Requirements

This shock absorber is intended for RC cars that use a 65mm front or rear shock. Fitment depends on matching the length, the 14mm body diameter and the mounting points. The included hollow steel flanged balls and M2 x 12 Philips screws help with installation. Check your model's shock length and mounting style before purchase, as no specific vehicle models are listed for this part.

Typical Uses

Use it to replace a bent, leaking or worn shock on a small RC car, or keep one in your spares box for track days and backyard runs. It also suits hobbyists who prefer to carry a ready-assembled damper rather than rebuild one mid-session.

What's in the Box

  • 1 x 65mm Metal Front/Rear Shock Absorber for RC Car
  • 2 x Hollow Steel Flanged Ball
  • 2 x Philips M2 x 12 Screws
65mm Metal Front/Rear Shock Absorber for RC car

Quick specs

Item Type
Accessory
Model No. / Name
Shock Absorber
Material
Metal and plastic
Length (mm)
65
Width (mm)
14 (Body Diameter)
Weight (g)
8
See all specifications