
1 / 6 · Click to enlarge
AI Summary
A complete snap-fit robot car kit for ages 10+ that includes chassis, motors, sensors, Arduino-compatible driver, batteries and charger. It teaches motor control, line following and remote operation without prior programming experience.
Key Highlights
- Snap-fit ABS chassis assembles without additional tools
- Includes L298N motor driver with on-board Arduino Uno
- Line sensor array and ultrasonic range finder for autonomous behaviour
- Two 18650 lithium-ion batteries and dual-slot charger included
- Infrared remote control module for wireless operation
- Recommended for ages 10 and up
Ideal For
- Beginners aged 10+ learning robotics and Arduino
- Parents looking for a hands-on STEM project
- School robotics clubs and classroom activities
- Makers wanting a snap-fit chassis for prototyping
- Hobbyists exploring line-following and obstacle detection
Buying Tip
Check that you have a computer with a USB port available for programming the Arduino-compatible board, as one is not included.
Elecvora expert review
Our verdict
The EasyMech Cligo kit is a well-equipped entry point into Arduino robotics, bundling a snap-fit chassis with all necessary electronics and power. It removes common barriers for beginners by including batteries, charger and tools.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Complete kit with batteries and charger included
- Tool-free snap-fit chassis assembly
- Wide range of sensors and modules for varied projects
- Clear age recommendation of 10+
Cons
- Requires a computer for programming (not included)
- Chassis nubs are fragile if forced with pliers
- No detailed programming tutorials beyond assembly guide
Best for
Beginners and young makers aged 10+ starting with Arduino robotics
Not ideal for
Advanced users seeking high-speed or outdoor terrain robots
Specifications
| Item Type | Kit |
|---|---|
| Model No. / Name | Robot Kit |
| Length (mm) | 210 |
| Width (mm) | 145 |
| Weight (g) | 890 |
| Shipping Weight | 0.91 kg |
| Shipping Dimensions | 22 × 15 × 9 cm |
What's in the box
- 1 x Cligo 2WD ABS chassis
- 2 x 300 RPM BO motor (straight)
- 2 x 65 mm robot wheels (yellow)
- 1 x ball caster wheel (small)
- 1 x SmartElex RLS-06 analog and digital line sensor array
- 1 x Tower Pro SG90 1.2 kg-cm 180-degree servo motor
- 1 x SmartElex L298N motor driver with on-board Arduino Uno
- 2 x Orange ICR 18650 2500mAh lithium-ion batteries
- 1 x 18650 x 2 battery holder with cover, on/off switch and DC jack
- 1 x HC-SR04 ultrasonic range finder
- 1 x EasyMech snap-fit ABS bracket for HC-SR04
- 1 x Tomo V6-2 dual USB battery charger
- 1 x 20 cm DuPont jumper cable, male to female, 40 pcs
- 1 x 20 cm DuPont jumper cable, female to female, 40 pcs
- 1 x infrared IR wireless remote control module kit
- 1 x 2-in-1 Philips screwdriver
- 1 x 50 cm micro USB cable
- 1 x 8 mm spiral wrapping band
- 1 x 3M double-sided sponge adhesive pad
- 1 x assembly guide
Frequently Asked Questions
What age is this kit suitable for?
Do I need previous programming experience?
Are batteries included?
What controller board does it use?
What sensors are included?
How do I care for the chassis?
Overview
The EasyMech Cligo Smart Robot Car Kit 2WD is a hands-on educational platform for learning robotics, electronics and programming with the Arduino language. Aimed at beginners and young makers aged 10 and above, the kit arrives with a snap-fit ABS chassis and all the core components needed to build a working two-wheel-drive robot car. Because the chassis panels simply snap together, assembly is straightforward and does not require additional tools beyond the included screwdriver for mounting the servo motor.
Key Features
- Snap-fit ABS chassis: Durable, lightweight plates and mounts that assemble quickly and can be reconfigured for future projects.
- Complete electronics set: Two 300 RPM BO motors, a SmartElex L298N motor driver with on-board Arduino Uno, a line sensor array, an HC-SR04 ultrasonic range finder and a Tower Pro SG90 servo motor.
- Power included: Two Orange ICR 18650 2500mAh lithium-ion batteries plus a Tomo V6-2 dual-slot intelligent charger.
- Remote control ready: An infrared IR wireless remote control module kit lets you drive the car wirelessly.
- Wiring and accessories: DuPont jumper cables, a micro USB cable, spiral wrapping band and double-sided adhesive pad are supplied.
Specifications Explained
The chassis measures 210 mm in length and 145 mm in width, giving a compact footprint suitable for tabletop or classroom use. At 890 g, the kit is lightweight enough to be portable while remaining stable on smooth surfaces. The 300 RPM motors provide a moderate speed for controlled indoor driving, and the 65 mm wheels pair with a small ball caster for balance. The included line sensor array enables line-following behaviour, while the ultrasonic range finder supports distance sensing for obstacle-aware projects. The SG90 servo offers 180-degree rotation and 1.2 kg-cm torque, useful for panning sensors or adding simple motion. Shipping weight is 0.91 kg and shipping dimensions are 22 × 15 × 9 cm.
Compatibility and Requirements
The kit is built around an Arduino Uno-compatible motor driver board, so programming is done using the Arduino language. No previous programming or electronics experience is required, but a willingness to learn robotics is recommended. The included 18650 batteries and charger mean the kit is self-contained for power. A micro USB cable is provided for connecting the board to a computer. Note that the kit does not include a computer, and assembly guidance is supplied in the box.
Typical Uses
Use the Cligo kit to learn basic motor control, experiment with line-following and remote operation, or as a starting point for sensor-based projects such as obstacle detection. It is equally suited to home learning, school robotics clubs and maker workshops.
What's in the Box
- 1 x Cligo 2WD ABS chassis
- 2 x 300 RPM BO motor (straight)
- 2 x 65 mm robot wheels (yellow)
- 1 x ball caster wheel (small)
- 1 x SmartElex RLS-06 analog and digital line sensor array
- 1 x Tower Pro SG90 1.2 kg-cm 180-degree servo motor
- 1 x SmartElex L298N motor driver with on-board Arduino Uno
- 2 x Orange ICR 18650 2500mAh lithium-ion batteries
- 1 x 18650 x 2 battery holder with cover, on/off switch and DC jack
- 1 x HC-SR04 ultrasonic range finder
- 1 x EasyMech snap-fit ABS bracket for HC-SR04
- 1 x Tomo V6-2 dual USB battery charger
- 1 x 20 cm DuPont jumper cable, male to female, 40 pcs
- 1 x 20 cm DuPont jumper cable, female to female, 40 pcs
- 1 x infrared IR wireless remote control module kit
- 1 x 2-in-1 Philips screwdriver
- 1 x 50 cm micro USB cable
- 1 x 8 mm spiral wrapping band
- 1 x 3M double-sided sponge adhesive pad
- 1 x assembly guide
Quick specs
- Item Type
- Kit
- Model No. / Name
- Robot Kit
- Length (mm)
- 210
- Width (mm)
- 145
- Weight (g)
- 890
- Shipping Weight
- 0.91 kg


















