Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The 8*10mm 2.2uH DIP power inductor is a through-hole choke rated at 0.8A with 0.24mΩ DC resistance. Its compact, magnetically shielded design makes it ideal for DC/DC converters and motherboard power filtering.

Key Highlights

  • 2.2uH inductance with 10% tolerance for predictable filtering
  • 0.8A current rating suits low-to-moderate power rails
  • Low 0.24mΩ DC resistance reduces conduction losses
  • Through-hole DIP mounting for secure, serviceable joints
  • Compact 11 x 9mm body fits tight PCB layouts
  • Operates from -40 to 85°C in demanding environments

Ideal For

  • Electronics hobbyists building through-hole power supplies
  • Repair technicians servicing laptop and desktop motherboards
  • Students learning about inductors and DC/DC conversion
  • Makers prototyping custom VRM or filter circuits
  • Small-batch manufacturers needing a compact 2.2uH choke

Buying Tip

Check that your circuit's continuous current stays below 0.8A and that the 2.2uH value suits your switching frequency before ordering.

Elecvora expert review

Our verdict

A straightforward, compact through-hole inductor that delivers the stated 2.2uH at a useful 0.8A rating with low DC resistance. It is a solid choice for repair, prototyping and general power filtering where space is limited.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Compact 11 x 9mm footprint saves board space
  • Low 0.24mΩ DCR for efficient power transfer
  • Magnetically shielded to reduce interference
  • Wide -40 to 85°C operating range

Cons

  • 0.8A rating limits use to low-power circuits
  • Through-hole mounting requires drilling and soldering
  • Tolerance of 10% may not suit precision applications

Best for

Repair and prototyping of low-power DC/DC converters and motherboard power circuits

Not ideal for

High-current power supplies or surface-mount assembly

Specifications

Inductance2.2uH
Tolerance (%)10
Mounting TypeThrough Hole
Current Rating (A)0.8
Frequency (Hz)1000
Operating Temperature (°C)-40 to 85
Length (mm)11
Width (mm)9
Weight (g)1 (approx) (each)
DC Resistance(mΩ)0.24
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 8*10mm 2.2uH DIP Power Inductor

Frequently Asked Questions

What is the inductance and tolerance of this inductor?
It has a nominal inductance of 2.2uH with a tolerance of ±10%.
Can I use this inductor in a surface-mount design?
No, it is a through-hole component and requires a PCB with plated holes and soldering.
What is the maximum current this inductor can handle?
The current rating is 0.8A. Do not exceed this value in continuous operation.
What is included in the package?
The package includes one 8*10mm 2.2uH DIP power inductor.
What is the operating temperature range?
It is rated for operation between -40°C and 85°C.
Is this inductor magnetically shielded?
Yes, it features a magnetically shielded construction to help minimise flux leakage.

Overview

The 8*10mm 2.2uH DIP power inductor is a wire-wound choke coil built for through-hole mounting. It provides 2.2uH of inductance with a 10% tolerance and is rated for 0.8A, making it suitable for power supply filtering, energy storage and general-purpose inductor applications. The component measures approximately 11mm long and 9mm wide, weighs about 1g, and features a magnetically shielded construction that helps limit flux leakage.

Key Features

  • 2.2uH inductance: A common value for switching power supplies and DC/DC converter output stages.
  • 0.8A current rating: Handles small to medium load currents in embedded and consumer electronics.
  • Low DC resistance: At 0.24mΩ, the inductor minimises resistive losses in the power path.
  • Through-hole DIP package: Easy to insert and solder on prototyping boards and printed circuit boards.
  • Magnetically shielded: Reduces interference with nearby components.
  • RoHS free: Complies with restrictions on hazardous substances.

Specifications Explained

Inductance (2.2uH): This value determines how much energy the inductor stores and how it filters high-frequency noise. It is a typical choice for step-down converters and power rail filtering.

Tolerance (10%): The actual inductance may vary by up to 10% from the nominal value, which is acceptable for most general-purpose power designs.

Current rating (0.8A): This is the maximum continuous current the inductor is rated to handle. Ensure your circuit's average current stays below this figure.

DC resistance (0.24mΩ): Lower resistance means less voltage drop and heat generation, improving efficiency.

Operating temperature (-40 to 85°C): The inductor can operate across a wide temperature range, suitable for most indoor and protected outdoor electronics.

Compatibility and Requirements

This is a through-hole component, so it requires a PCB with plated through-holes and soldering equipment. It is not intended for surface-mount assembly. The 0.8A current rating means it should not be used in circuits that exceed this current under normal operation. No other compatibility information is provided.

Typical Uses

  • DC/DC converters in distributed power systems
  • Voltage regulator modules (VRM) on motherboards
  • General-purpose filtering in power supplies
  • Prototyping and educational electronics projects
  • Repair and replacement in laptop and desktop motherboards

What's in the Box

1 x 8*10mm 2.2uH DIP Power Inductor.

Quick specs

Inductance
2.2uH
Tolerance (%)
10
Mounting Type
Through Hole
Current Rating (A)
0.8
Frequency (Hz)
1000
Operating Temperature (°C)
-40 to 85
See all specifications