Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A pack of two black plastic end connectors for 8 x 8 mm drag chains, supplied as one fixed end and one moving end. They let you replace a broken chain end piece quickly without buying a whole new chain.

Key Highlights

  • Matched pair: one fixed end and one moving end connector
  • Fits 8 x 8 mm drag chain profiles with a 14 mm width
  • Moulded black plastic body, lightweight at about 6 g each
  • 40 mm length keeps the chain termination compact
  • Simple push-on replacement for cracked or worn ends
  • Pack of 2 covers both ends of a single chain run

Ideal For

  • 3D printer builders managing cable runs on moving axes
  • CNC and laser cutter makers using compact drag chains
  • Repair technicians replacing cracked chain end pieces
  • Desktop automation and robotics hobbyists
  • Workshops keeping spare chain fittings on hand

Buying Tip

Measure your chain's profile and overall width before ordering, since these ends are made specifically for 8 x 8 mm chain with a 14 mm width.

Elecvora expert review

Our verdict

A sensible, low-cost spare for anyone running 8 x 8 mm drag chain, especially where an end piece has already cracked. The paired fixed and moving ends remove the guesswork of ordering the right part twice.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Both fixed and moving ends supplied together
  • Very light at about 6 g per connector
  • Compact 40 mm length suits tight installations
  • Simple replacement rather than a full chain swap

Cons

  • Only fits 8 x 8 mm chain profiles
  • Chain and mounting hardware not included
  • Plastic construction suits light-duty use rather than heavy loads

Best for

Makers and technicians maintaining small drag chain setups

Not ideal for

Heavy industrial cable carrier systems requiring metal end fittings

Specifications

MaterialPlastic
ColorBlack
Diameter (mm)8 x 8
Width (mm)14
Length (m)0.04 Meter
Weight (g)6
Shipping Weight0.01 kg
Shipping Dimensions6 × 3 × 3 cm

What's in the box

  • 1 x 8 x 8 mm drag chain wire end connector pair (pack of 2): one fixed end and one moving end

Frequently Asked Questions

What exactly is included in this pack?
You receive one pair of end connectors: one fixed end and one moving end, both for 8 x 8 mm drag chain. The chain itself is not included.
Will these fit my existing drag chain?
They are made for 8 x 8 mm chain profiles with a 14 mm width. Check your chain's stated size and width before ordering, as other profiles will not match.
Do these connectors carry power or voltage?
No. They are plastic mechanical end pieces that terminate the chain; the cables running inside the chain carry the signals and power.
How do I know which connector is the fixed end?
The pair contains one fixed and one moving end by design. Compare the two against your mounting points and test-fit before final assembly.
Are they difficult to install?
No. They are push-on end pieces that seat onto the chain termination, so fitting is a straightforward task during assembly or repair.
How should I look after them?
Keep them clean and check they remain seated during maintenance. Replace any connector that shows cracks or looseness rather than continuing to use it.

Overview

Every cable drag chain needs a clean termination at each end, and these 8 x 8 mm drag chain wire end connectors provide exactly that. The pack contains a matched pair: one connector for the fixed end of the chain and one for the moving end. Both are moulded in black plastic and sized for 8 x 8 mm chain profiles with a 14 mm overall width.

Because the ends are the parts that take the most handling during assembly and maintenance, they are also the parts most likely to crack or wear. Keeping a spare pair on hand means a damaged end piece does not stall a build or force you to replace an otherwise serviceable chain.

Key Features

  • Fixed and moving end in one pack so both terminations of a chain run are covered.
  • 8 x 8 mm profile fit matching the stated chain size and 14 mm width.
  • Lightweight plastic construction at approximately 6 g per connector, adding minimal moving mass.
  • Compact 40 mm length for a tidy, space-efficient chain exit.
  • Black finish that blends with typical chain and cable colours.
  • Straightforward replacement of worn or broken end pieces.

Specifications Explained

The 8 x 8 mm figure is the internal profile size the connector is made for, so check your chain's stated dimensions before ordering. The 14 mm width describes the connector's overall width, which matters when clearance around the chain path is tight.

At 40 mm long and around 6 g each, these ends are small and light enough for compact machines where extra mass on a moving axis is unwelcome. The plastic body keeps the part affordable and non-conductive, which is useful when routing signal and power cables close together.

Compatibility and Requirements

These connectors are intended for drag chains with an 8 x 8 mm profile. They are supplied as a pair only; the chain itself and any mounting hardware are not included. Confirm the profile size and width of your existing chain before purchase, as the fit depends on matching those dimensions.

Typical Uses

Common applications include 3D printer cable management, small CNC router and laser builds, desktop automation rigs, and general repair work where an existing chain end has failed. They are equally useful as spares kept in a workshop drawer for quick swap-outs during maintenance.

What's in the Box

  • 1 x 8 x 8 mm drag chain wire end connector pair (pack of 2): one fixed end and one moving end

Quick specs

Material
Plastic
Color
Black
Diameter (mm)
8 x 8
Width (mm)
14
Length (m)
0.04 Meter
Weight (g)
6
See all specifications