
1 / 5 · Click to enlarge
AI Summary
A through-hole 2.2mH power inductor measuring 9 x 12mm, rated 0.27A with 10% tolerance and magnetically shielded construction. It suits DC/DC converter filtering and general-purpose choke duties on compact boards.
Key Highlights
- 2.2mH inductance with 10% tolerance for predictable filtering
- 0.27A current rating suits low-current DC/DC and VRM circuits
- Magnetically shielded core keeps flux leakage small
- Through-hole DIP leads for simple hand soldering and repairs
- 9 x 12mm body fits compact board layouts
- Operates from -40 to 85°C for varied environments
Ideal For
- Electronics technicians repairing desktop and laptop motherboards
- Makers building DC/DC converter prototypes
- Students learning through-hole power component assembly
- Repair shops stocking common choke values
- Hobbyists working on VRM and general filtering circuits
Buying Tip
Check the lead spacing on your board against the 9 x 12mm body before ordering, and confirm your circuit current stays within the 0.27A rating.
Elecvora expert review
Our verdict
A tidy, well-specified through-hole choke for low-current filtering and repair work, with shielding that helps on dense boards. It is a sensible spare to keep on hand for DC/DC and VRM jobs.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Clear 2.2mH value with a defined 10% tolerance
- Magnetically shielded to reduce flux leakage
- Low 1.8mΩ DC resistance for its class
- Compact 9 x 12mm body with easy through-hole mounting
Cons
- 0.27A rating limits it to low-current circuits
- Single unit only, so larger builds need multiple orders
- No datasheet curve for saturation behaviour is provided
Best for
Low-current DC/DC filtering and motherboard repair work
Not ideal for
High-current power rails above the 0.27A rating
Specifications
| Inductance | 2.2mH |
|---|---|
| Tolerance (%) | 10 |
| Mounting Type | Through Hole |
| Current Rating (A) | 0.27 |
| Frequency (Hz) | 1000 |
| Operating Temperature (°C) | -40 to 85 |
| Length (mm) | 9 |
| Width (mm) | 12 |
| Weight (g) | 1 (approx) (each) |
| DC Resistance(mΩ) | 1.8 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 1 x 9 x 12mm 2.2mH DIP Power Inductor
Frequently Asked Questions
What is this inductor used for?
Can I use it in a circuit drawing more than 0.27A?
Does it need any extra parts to work?
How do I know it will fit my board?
What does the 10% tolerance mean?
How should I store spare inductors?
Overview
This 9 x 12mm DIP power inductor is a wire-wound choke built for through-hole mounting. It provides 2.2mH of inductance with a 10% tolerance and a current rating of 0.27A, packaged in a compact body measuring 9mm in length and 12mm in width. The magnetically shielded construction helps keep magnetic flux leakage small, which is useful when the inductor sits close to other components on a crowded board.
Each unit weighs approximately 1g, so a handful of spares takes up almost no space in a parts drawer. The component is intended for general-purpose use in power filtering and conversion circuits.
Key Features
- 2.2mH inductance: a relatively high value for a part this size, suited to low-frequency filtering.
- 10% tolerance: keeps part-to-part inductance variation within a defined window.
- 0.27A current rating: appropriate for low-current rails and control circuitry.
- 1.8mΩ DC resistance: limits resistive loss at the rated current.
- Magnetically shielded: reduces flux leakage into nearby traces and components.
- Through-hole leads: straightforward to fit by hand or with standard soldering tools.
Specifications Explained
Inductance and tolerance. At 2.2mH, this choke opposes rapid current changes strongly, which is what makes it useful in filtering and energy-storage roles. The 10% tolerance tells you how far an individual part may sit from the nominal value, so allow for that spread when tuning a circuit.
Current rating. The 0.27A figure is the current the part is rated for. Design your circuit so the steady current stays at or below this level, and remember that saturation behaviour depends on the core, so leave margin in demanding designs.
DC resistance. At 1.8mΩ, the copper loss at the rated current is small, which keeps the part cool in low-power rails.
Frequency and temperature. The 1000Hz reference frequency indicates the measurement condition for the inductance value. The -40 to 85°C operating range covers most indoor electronics environments.
Compatibility and Requirements
This is a through-hole component, so the receiving board needs plated holes spaced to match the lead pitch of the 9 x 12mm body. It requires soldering equipment and a circuit designed for a 2.2mH, 0.27A inductor. No other accessories are supplied or required.
Typical Uses
- DC/DC converters in distributed power systems
- VRM applications on motherboards for laptops and desktop computers
- General-purpose filtering and choke duties
- Repair and replacement work on existing boards
- Prototyping and educational power circuits
What's in the Box
1 x 9 x 12mm 2.2mH DIP Power Inductor.
Quick specs
- Inductance
- 2.2mH
- Tolerance (%)
- 10
- Mounting Type
- Through Hole
- Current Rating (A)
- 0.27
- Frequency (Hz)
- 1000
- Operating Temperature (°C)
- -40 to 85













