Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 9x12mm through-hole power inductor provides 330uH inductance at 0.5A with 10% tolerance. Its magnetically shielded DIP package and low 0.45mΩ DC resistance make it a reliable choice for filtering and DC/DC converter circuits.

Key Highlights

  • 330uH inductance with 10% tolerance for predictable filtering
  • 0.5A current rating suits low-to-moderate power rails
  • Through-hole DIP mounting for secure board attachment
  • Magnetically shielded construction reduces flux leakage
  • Compact 9x12mm footprint saves board space
  • Operates from -40°C to 85°C in demanding environments

Ideal For

  • Electronics technicians repairing desktop and laptop motherboards
  • Makers building DC/DC converter and VRM circuits
  • Students learning through-hole power component assembly
  • Designers needing a compact shielded choke for general filtering

Buying Tip

Check that your PCB footprint accepts a 9x12mm radial DIP body and that your circuit draws no more than 0.5A continuous current before ordering.

Elecvora expert review

Our verdict

A dependable through-hole choke for low-current filtering and DC/DC work, with shielding that helps in dense layouts. It is a straightforward part for repair and prototyping rather than high-power designs.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Magnetically shielded to limit interference
  • Low 0.45mΩ DC resistance
  • Wide -40°C to 85°C operating range
  • Compact 9x12mm through-hole package

Cons

  • 0.5A rating limits use to low-power circuits
  • Requires through-hole soldering and board space

Best for

Low-power DC/DC converters, VRMs and general filtering on through-hole boards

Not ideal for

High-current power supplies or surface-mount-only assemblies

Specifications

Inductance330uH
Tolerance (%)10
Mounting TypeThrough Hole
Current Rating (A)0.5
Frequency (Hz)1000
Operating Temperature (°C)-40 to 85
Length (mm)9
Width (mm)12
Weight (g)1 (approx) (each)
DC Resistance(mΩ)0.45
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

What's in the box

  • 1 x 9x12mm 330uH DIP Power Inductor

Frequently Asked Questions

What is the inductance and tolerance of this inductor?
It has a nominal inductance of 330uH with a tolerance of ±10%.
What is the maximum current this inductor can handle?
The current rating is 0.5A. Keep continuous current at or below this value for reliable operation.
Is this component magnetically shielded?
Yes, the inductor is magnetically shielded, which helps reduce flux leakage and interference with nearby parts.
What is included in the package?
The package contains 1 x 9x12mm 330uH DIP Power Inductor.
What is the operating temperature range?
It is rated for operation from -40°C to 85°C.
How should I care for this inductor?
Store it in a dry place and avoid mechanical stress on the leads. During soldering, avoid excessive heat that could damage the winding or core.

Overview

The 9x12mm 330uH DIP Power Inductor is a wire-wound choke coil built for through-hole mounting. It stores energy and opposes changes in current, making it useful for smoothing supply rails and limiting high-frequency noise. The component measures 9mm in length and 12mm in width, with a nominal weight of about 1g per piece.

Key Features

  • 330uH inductance with ±10% tolerance for consistent circuit behaviour.
  • 0.5A current rating suitable for low-power DC/DC and filtering stages.
  • 0.45mΩ DC resistance helps keep conduction losses low.
  • Magnetically shielded to reduce flux leakage and nearby interference.
  • Through-hole DIP leads for strong mechanical joints on PCBs.
  • Wide operating range from -40°C to 85°C.

Specifications Explained

Inductance of 330uH defines how strongly the part resists current changes; the 10% tolerance means actual values stay close to this figure. A 0.5A current rating sets the safe continuous load for the winding. DC resistance of 0.45mΩ is the copper loss at DC, so lower values waste less power. The 1000Hz frequency figure indicates the reference test condition for the inductance rating. The 9x12mm body and radial leads make the part easy to fit on standard prototyping and production boards.

Compatibility and Requirements

This inductor requires a through-hole PCB footprint with lead spacing that matches the radial DIP package. It is a passive component and needs no separate power supply. Observe the 0.5A current limit and the -40°C to 85°C operating range when selecting it for a design. No other accessories are required for basic use.

Typical Uses

  • DC/DC converters in distributed power systems
  • Voltage regulator module (VRM) circuits
  • Motherboards for laptops and desktop computers
  • General-purpose filtering and choke applications
  • Prototyping and educational electronics projects

What's in the Box

1 x 9x12mm 330uH DIP Power Inductor.

Quick specs

Inductance
330uH
Tolerance (%)
10
Mounting Type
Through Hole
Current Rating (A)
0.5
Frequency (Hz)
1000
Operating Temperature (°C)
-40 to 85
See all specifications