
1 / 4 · Click to enlarge
AI Summary
A two-module 915MHz telemetry kit that links a flight controller to a computer or OTG tablet over a transparent serial link. Both transceivers are interchangeable and deliver a 500mW full-duplex connection with open-source SIK firmware.
Key Highlights
- Two interchangeable transceivers, each usable as air or ground module
- Si1000 8051 microcontroller paired with Si4432 wireless module
- 500mW maximum output power, adjustable as needed
- LBT and AFA support with adaptive time-division multiplexing
- Micro-USB port plus 6-position Molex connector on each unit
- Includes two 2.5dBi antennas, OTG cable and connection cable set
Ideal For
- FPV pilots who want live telemetry on a ground station
- ArduPilot and MAVLink users configuring radios in Mission Planner
- Makers building wireless serial links for DIY projects
- Tablet-based ground station users with OTG support
- Builders who want interchangeable air and ground radios
Buying Tip
Confirm your ground station device can act as a USB host (or supports OTG) before relying on the micro-USB path, and keep the antennas fitted whenever the radios are powered.
Elecvora expert review
Our verdict
A practical, no-frills telemetry pair that covers the essentials: interchangeable modules, a 500mW adjustable radio and open-source firmware that works with common ground station software. It is a sensible pick for pilots and makers who want a straightforward serial bridge without paying for extras they will not use.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Both modules are interchangeable, simplifying spares and swaps
- 500mW output is adjustable for different link conditions
- LBT, AFA and error correction support a steadier link
- Includes antennas, OTG cable and connection cables
Cons
- Housing is supplied at random, with or without a case
- No mounting hardware or detailed printed manual included
- Configuration requires familiarity with ground station software
Best for
FPV pilots and makers needing a simple 915MHz telemetry bridge
Not ideal for
Users who want a cased, plug-and-play product with printed instructions
Specifications
| Item Type | Kit |
|---|---|
| Microcontroller | Si1000 8051 |
| Wireless modules | Si4432 |
| Supported | LBT and AFA |
| Shipping Weight | 0.064 kg |
| Shipping Dimensions | 25 × 7 × 2 cm |
What's in the box
- 2 x Telemetry Module
- 2 x 2.5dBi Antenna
- 1 x Micro USB OTG cable
- 1 x Set of Connection Cable
Frequently Asked Questions
Do I need a separate air and ground module?
What software configures these radios?
What is the maximum output power?
What connectors are on each module?
What is included in the package?
Will I receive a case with the modules?
Overview
This kit gives you a matched pair of 915MHz telemetry transceivers for building a wireless serial bridge between a flight controller and a host device. Each module carries an Si1000 8051 microcontroller and an Si4432 wireless stage, so both units are interchangeable: either one can serve as the air-side or ground-side radio. That removes the fixed air/ground split found on older telemetry sets and simplifies spares and field swaps.
With a maximum output power of 500mW and a transparent serial link, the pair is intended for live data exchange rather than video. You get a two-way, full-duplex connection that carries telemetry streams such as position, system voltage, heading and navigation data into MAVLink-based ground station software.
Key Features
- Interchangeable modules: both transceivers support UART or USB connections and either role.
- Open-source SIK firmware: configurable through Mission Planner and APM Planner.
- Robust link handling: frequency hopping spread spectrum, adaptive time-division multiplexing, LBT and AFA support.
- Error correction: built-in coding tolerates up to 25% data bit error.
- Flexible configuration: AT commands for data transmission settings and RT commands for remote control data.
- Practical connectors: micro-USB port, 6-position Molex connector and SMA antenna connector.
Specifications Explained
The 915MHz band is the operating frequency of this kit, and the 500mW figure is the maximum output power, which is adjustable. Higher output generally helps range, while lower settings reduce interference and power draw. The Si1000 8051 microcontroller handles the module logic, and the Si4432 wireless module manages the radio side.
LBT (listen before talk) and AFA support mean the radios can behave politely on a shared band. Adaptive time-division multiplexing keeps both directions of the link working together, and the built-in error-correcting code helps the stream survive imperfect conditions. The configurable duty cycle lets you tune how the link behaves for your use case.
Compatibility and Requirements
The kit is designed for flight controllers and USB or UART-equipped devices such as computers, laptops and OTG-capable tablets. Configuration is done through Mission Planner and APM Planner, and the radios use open-source SIK firmware. You will need a suitable host device and a flight controller to connect to; no other accessories beyond the included cables are supplied.
Typical Uses
Use the pair to view live telemetry from an aircraft, adjust settings during a session, or feed a wireless serial interface into a DIY electronics project. The transparent serial link also makes it useful wherever you need a short-range two-way data bridge without running a cable.
What's in the Box
- 2 x telemetry modules
- 2 x 2.5dBi antennas
- 1 x micro-USB OTG cable
- 1 x set of connection cables
Quick specs
- Item Type
- Kit
- Microcontroller
- Si1000 8051
- Wireless modules
- Si4432
- Supported
- LBT and AFA
- Shipping Weight
- 0.064 kg
- Shipping Dimensions
- 25 × 7 × 2 cm













