Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact aluminum alloy stand that holds your soldering iron safely between joints. The included cleaning sponge lets you wipe the tip clean for consistent heat transfer while you work.

Key Highlights

  • Aluminum alloy body for a stable, heat-resistant resting cradle
  • Compact 150 x 70 x 75 mm footprint suits crowded benches
  • Includes a cleaning sponge for wiping solder and oxidation from the tip
  • Holds the hot iron away from hands, wires and the work surface
  • Simple one-piece design with no assembly or power required
  • Lightweight at 0.21 kg shipping weight for easy repositioning

Ideal For

  • Hobbyists building and repairing FPV drones and RC models
  • Electronics repair technicians working at a fixed bench
  • Students and makers learning through-hole soldering
  • DIYers doing cable and connector repairs at home
  • Workshops that need a simple, tidy iron rest

Buying Tip

Check the cradle opening against your iron before buying, since the product data does not list specific compatible iron models.

Elecvora expert review

Our verdict

A no-frills aluminum stand that does the one job it is meant for: keeping a hot iron safely parked while you work. The included sponge is a practical addition for tip maintenance.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Sturdy aluminum alloy body
  • Compact 150 x 70 x 75 mm footprint
  • Includes a cleaning sponge
  • No assembly or power required
  • Light and easy to reposition

Cons

  • No specific iron models listed as compatible
  • Sponge needs regular rinsing and re-dampening
  • Basic design without extra storage or tip holders

Best for

Hobbyists and repairers who need a simple, stable iron rest at a fixed bench

Not ideal for

Users who need a full soldering station with temperature control or multiple tool holders

Specifications

Item TypeSoldering Iron Stand
MaterialAluminum Alloy
ColorBlack
Dimensions (L x W x H) mm150 x 70 x 75
Shipping Weight0.21 kg
Shipping Dimensions16 × 8 × 8 cm

What's in the box

  • 1 x 936 Aluminum Alloy Soldering Iron Support Stand with Cleaning Sponge

Frequently Asked Questions

What is this stand made of?
It is made from aluminum alloy with a black finish.
Does it include a cleaning sponge?
Yes, the package includes one cleaning sponge for wiping the soldering iron tip.
Does the stand need power or batteries?
No. It is a passive holder with no electrical parts.
What are the dimensions?
The stand measures 150 x 70 x 75 mm and has a shipping weight of 0.21 kg.
How should I use the sponge?
Dampen it with water and squeeze out excess so it is damp, not soaking wet, then wipe the hot tip gently between joints.
Will my soldering iron fit?
The product data does not list specific compatible iron models, so check the cradle against your iron before buying.

Overview

The 936 Aluminum Alloy Soldering Iron Stand is a simple but genuinely useful bench accessory. When you are soldering, the iron spends much of its time out of your hand, and laying it down on the bench is a burn risk for you, your cables and your project. This stand gives the iron a dedicated cradle so it stays put and stays clear of everything else while you pick up components or inspect a joint.

The stand is made from aluminum alloy in a black finish and measures 150 x 70 x 75 mm. A cleaning sponge is included, so you can keep the tip free of excess solder and oxidation during a session.

Key Features

  • Stable aluminum alloy construction: a solid base that resists tipping when the iron is placed in the cradle.
  • Compact footprint: at 150 x 70 x 75 mm it takes up little room on a busy workbench.
  • Included cleaning sponge: wipe the hot tip to remove debris and help maintain heat transfer.
  • No power or assembly needed: place it on the bench and it is ready to use.
  • Black finish: understated and easy to keep clean.

Specifications Explained

Material: aluminum alloy gives the stand a rigid structure without making it heavy to move around the bench. Dimensions: the 150 x 70 x 75 mm size describes a compact stand that fits beside your project rather than dominating the desk. Shipping weight of 0.21 kg reflects a light item that is easy to store and reposition. The stand itself has no electrical parts, so there is nothing to wire up or configure.

Compatibility and Requirements

The stand is a passive holder and does not require power, batteries or software. It is intended to support a soldering iron in a workstation setting. No specific iron models or tip sizes are stated in the product data, so check that your iron fits the cradle before relying on it.

Typical Uses

Use it at a fixed soldering station for electronics repair, through-hole and wire soldering, FPV and RC hobby builds, and classroom or workshop practice. The included sponge is used during work to keep the tip clean between joints.

What's in the Box

  • 1 x 936 Aluminum Alloy Soldering Iron Support Stand with Cleaning Sponge

Quick specs

Item Type
Soldering Iron Stand
Material
Aluminum Alloy
Color
Black
Dimensions (L x W x H) mm
150 x 70 x 75
Shipping Weight
0.21 kg
Shipping Dimensions
16 × 8 × 8 cm
See all specifications