
1 / 7 · Click to enlarge
AI Summary
A 2-in-1 soldering station with a built-in fume extractor and 110W ceramic heater. The digital display and PID control help maintain stable tip temperature while the fan and carbon filters reduce solder smoke.
Key Highlights
- Combines a 110W soldering station with a built-in fume extractor
- PID temperature control with digital display for stable heat
- Dual activated carbon filters (9mm thick) for fume adsorption
- Five-blade fan for quiet, effective smoke extraction
- Helping hands clips and tilt-adjustable base hold work steady
- Sleep mode after 10 minutes, auto-shutdown after 30 minutes
Ideal For
- Electronics hobbyists and makers
- Repair technicians working on PCBs
- DIY audio and cable builders
- Crafters doing wood burning or stained glass
- Small workshop benches with limited space
Buying Tip
Check that the included iron variant (K917C for 220V or K917D for 110V) matches your local mains voltage before ordering.
Elecvora expert review
Our verdict
The YIHUA 948DQ-III is a practical space-saving solution for hobbyists who want fume extraction without a separate unit. Its 110W ceramic heater and PID control provide stable soldering performance, while the included filters and helping hands add value.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Combines soldering and fume extraction in one compact unit
- PID control with digital display for stable temperature
- Includes eight activated carbon filters and helping hands
- Sleep and auto-shutdown protect the iron and save power
Cons
- Fume extraction is best for occasional use, not heavy production
- Replacement filter availability may vary by region
- No temperature calibration feature mentioned
Best for
Hobbyists and repair techs wanting an all-in-one soldering and fume extraction station
Not ideal for
High-volume production soldering or tasks requiring precise temperature profiling
Specifications
| Item Type | Soldering Irons and Stations |
|---|---|
| Model No. / Name | 948DQ-III |
| Rated Voltage (VDC) | 110 to 240 VAC |
| Power Rating | 25 |
| Heating element | 110W |
| Operating Temperature (°C) | 32~104℉/ 0~40℃ |
| Storage Temperature (°C) | 4~176℉/ -20~80 |
| PID Interval | milliseconds-grade |
| Shipping Weight | 1.866 kg |
| Shipping Dimensions | 30 × 23 × 19 cm |
What's in the box
- 948DQ-III station unit
- K917C (220V) or K917D (110V) soldering iron
- X-2 multiple storage soldering iron stand
- 8 x activated carbon filters (4 front + 4 rear)
- 2 x fenders (left + right)
- Tilt angle adjustable base
- 2 x helping clips
Frequently Asked Questions
What voltage does the YIHUA 948DQ-III support?
How often should I replace the carbon filters?
Does the station come with a soldering iron?
Can I use the fume extractor without soldering?
What is the purpose of the helping hands clips?
How does sleep mode work?
Overview
The YIHUA 948DQ-III is a compact 2-in-1 workstation that brings soldering and fume extraction together. It is built around a 110W ceramic heating element with a built-in thermocouple and a PID microcontroller that stabilizes temperature at millisecond intervals. The digital display lets you monitor the iron temperature at a glance. A five-blade fan draws solder smoke through two layers of 9mm activated carbon filters, helping to reduce harmful fumes in your workspace. The package includes helping hands clips, a tilt-adjustable base, and a multiple storage iron stand to keep your bench organized.
Key Features
- 2-in-1 design: Soldering station and fume extractor in one unit, saving bench space.
- 110W ceramic heater: Fast heat-up and stable output for repetitive soldering tasks.
- PID temperature control: Millisecond-grade regulation with digital display for accurate, repeatable results.
- Double filtration: Front and rear activated carbon filters (four each) trap fumes from soldering and other craft work.
- Fume-directing fenders: Left and right fenders redirect smoke toward the extraction fan for better capture.
- Helping hands: Two clips hold wires or boards steady while you solder.
- Sleep and auto-shutdown: The iron enters low-temperature idle after 10 minutes of non-use and shuts down after 30 minutes in sleep.
Specifications Explained
The 110–240 VAC input means the station can run on standard mains voltage in most regions without a separate transformer. The 110W ceramic heating element provides enough power for common electronics soldering, from through-hole components to small SMD work. PID control at millisecond intervals helps keep tip temperature steady when you make repeated joints, reducing the need to wait for recovery. The operating temperature range of 0–40°C (32–104°F) refers to the ambient conditions the station is designed for, while storage should be kept between -20 and 80°C (-4 to 176°F). The 9mm activated carbon filters are replaceable, and the package includes eight filters to get you started.
Compatibility and Requirements
The station accepts 110–240 VAC mains power. The included soldering iron is supplied as K917C (220V) or K917D (110V) depending on your region, so check the plug and voltage before use. No additional power supply is required. The fume extractor uses the included activated carbon filters; replacements are not specified in this listing but can be sourced separately. The helping hands clips and tilt base are designed to work with the station as supplied.
Typical Uses
This station is suitable for electronics repair, hobby projects, DIY audio cables, Arduino and Raspberry Pi work, and small-scale production. The fume extraction is also useful for light wood burning, stained glass crafting, and other tasks that produce smoke. The helping hands and tilt base make it easier to work on PCBs and fine wires without a second person.
What's in the Box
- 948DQ-III station unit
- K917C (220V) or K917D (110V) soldering iron (region dependent)
- X-2 multiple storage soldering iron stand
- 8 x activated carbon filters (4 front + 4 rear)
- 2 x fenders (left + right)
- Tilt angle adjustable base
- 2 x helping clips
Quick specs
- Item Type
- Soldering Irons and Stations
- Model No. / Name
- 948DQ-III
- Rated Voltage (VDC)
- 110 to 240 VAC
- Power Rating
- 25
- Heating element
- 110W
- Operating Temperature (°C)
- 32~104℉/ 0~40℃



















