Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The YIHUA 929D-V is a 30W electric vacuum desoldering iron that combines a soldering iron and solder sucker in one tool. Its single-handed operation and easy-clean solder tube make through-hole desoldering fast and repeatable.

Key Highlights

  • 30W heating element with integrated vacuum pump for one-handed desoldering
  • Removable solder storage tube for quick cleaning and reuse
  • Includes 1.2mm nozzle; compatible with 1.0mm and 1.2mm nozzles
  • Heat deflector reduces heat transfer to the hand during continuous use
  • Plug-and-play operation with approximately 3-minute preheat time
  • Compact design: 260 x 35 x 27mm main unit

Ideal For

  • Electronics repair technicians removing through-hole components
  • DIY hobbyists and makers working with through-hole PCBs
  • Soldering beginners who need an affordable desoldering tool
  • Workshop benches needing a reusable desoldering solution

Buying Tip

Check that your mains voltage is 220-240V AC before use; this tool is not compatible with 120V outlets without a step-up transformer.

Elecvora expert review

Our verdict

The YIHUA 929D-V is a practical and affordable desoldering iron that combines heating and vacuum extraction in one hand, making through-hole rework more efficient. Its reusable design and easy cleaning set it apart from disposable solder suckers.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Single-handed operation speeds up desoldering
  • Removable solder tube is easy to clean and reuse
  • Heat deflector improves comfort during extended use
  • Plug-and-play with quick 3-minute preheat

Cons

  • Requires 220-240V AC power, not suitable for 120V regions without a transformer
  • Only one nozzle (1.2mm) included; other sizes sold separately
  • No temperature control; fixed 30W heating

Best for

Electronics repair and through-hole desoldering on 220-240V mains

Not ideal for

Use in 120V countries without a step-up transformer or for large ground-plane joints

Specifications

Item TypeSoldering Iron
Power Rating30
Main unit dimensionsL260xW35xH27mm ±5mm
Operating Temperature (°C)0~40°C/32°F~104°F
Nozzle DiameterΦ1.2mm
Shipping Weight0.1 kg
Shipping Dimensions20 × 4 × 4 cm

What's in the box

  • 1 x YIHUA 929D-V Electric Vacuum Desoldering Iron Solder Sucker Desoldering Pump Soldering Iron

Frequently Asked Questions

What voltage does the YIHUA 929D-V require?
It operates on 220-240V AC, 50Hz. It is not compatible with 120V outlets without a step-up transformer.
Can I use it for both soldering and desoldering?
Yes, it is a 2-in-1 tool designed for soldering and desoldering, though its primary function is vacuum desoldering.
What nozzles are included and can I change them?
It comes with a 1.2mm nozzle. You can change to optional 1.0mm or 1.2mm nozzles, but always let the tool cool completely first.
How do I clean the solder storage tube?
After the tool has cooled, lift and pull out the solder storage tube, empty the scrap solder, and reinsert it.
What is in the box?
The package includes 1 x YIHUA 929D-V Electric Vacuum Desoldering Iron Solder Sucker Desoldering Pump Soldering Iron.
How long does it take to heat up?
Allow approximately 3 minutes for preheating before use.

Overview

The YIHUA 929D-V is a 30W electric vacuum desoldering iron that merges a soldering iron and a desoldering pump into a single handheld tool. It is built for removing solder from through-hole joints and cleaning up excess solder bridges on PCBs. The short-travel handle lets you trigger the vacuum pump with one hand, so you can keep the nozzle on the joint and desolder continuously without changing your grip. Unlike disposable desoldering irons, the 929D-V features a removable solder storage tube that can be lifted out and cleaned, allowing the tool to be reused many times. The package includes a 1.2mm nozzle, and the tool accepts interchangeable 1.0mm and 1.2mm nozzles for different component sizes. A heat deflector at the end of the heating element helps limit heat transfer to your hand during prolonged use. The 929D-V is a plug-and-play tool: connect it to a 220-240V AC outlet, allow about three minutes for preheating, and it is ready for work.

Key Features

  • 2-in-1 design: Combines a soldering iron and a vacuum desoldering pump in one tool for efficient solder removal.
  • Single-handed operation: The short charging handle enables continuous desoldering without repositioning your grip.
  • Easy to clean and reuse: The solder storage tube can be removed for quick cleaning, extending the tool's life.
  • Interchangeable nozzles: Comes with a 1.2mm nozzle and supports optional 1.0mm and 1.2mm nozzles for different through-hole sizes.
  • Heat deflector: Helps prevent excess heat from reaching your hand during extended desoldering sessions.
  • Plug and play: No complex setup; preheats in approximately 3 minutes.

Specifications Explained

Power rating (30W): A 30W heating element provides enough heat for typical through-hole desoldering on standard PCBs. It is suited for small to medium joints rather than large ground planes.

Nozzle diameter (Φ1.2mm): The 1.2mm nozzle is a versatile size for many through-hole components. The tool also accepts 1.0mm nozzles for finer work, giving you flexibility across different joint sizes.

Main unit dimensions (L260 x W35 x H27mm ±5mm): The slim, pen-like body measures 260mm in length and 35mm in width, making it comfortable to hold and maneuver in tight spaces.

Operating temperature (0-40°C / 32-104°F): This is the ambient temperature range for safe operation. Avoid using the tool outside this range.

Rated voltage (220-240V AC, 50Hz): The desoldering iron is designed for use with standard mains power in regions supplying 220-240V AC at 50Hz. It is not compatible with 120V outlets without a step-up transformer.

Compatibility and Requirements

The YIHUA 929D-V operates on 220-240V AC, 50Hz power. It is intended for through-hole desoldering and solder bridge removal on electronic circuit boards. The included 1.2mm nozzle can be swapped with optional 1.0mm and 1.2mm nozzles (sold separately) for different component sizes. Always allow the tool to cool completely before changing the nozzle.

Typical Uses

  • Removing through-hole components from PCBs during repair or salvage.
  • Cleaning excess solder from joints and bridges.
  • Reworking and prototyping on through-hole circuit boards.
  • General electronics desoldering tasks in workshops and repair benches.

What's in the Box

  • 1 x YIHUA 929D-V Electric Vacuum Desoldering Iron Solder Sucker Desoldering Pump Soldering Iron

Quick specs

Item Type
Soldering Iron
Power Rating
30
Main unit dimensions
L260xW35xH27mm ±5mm
Operating Temperature (°C)
0~40°C/32°F~104°F
Nozzle Diameter
Φ1.2mm
Shipping Weight
0.1 kg
See all specifications

More from YIHUA

View all →

Related Products

View all →