
1 / 3 · Click to enlarge
AI Summary
A 130W dual soldering station with two independently controlled irons, each adjustable from 100°C to 480°C with ±2°C stability. It lets you keep two tip profiles ready for faster SMD and PCB repair.
Key Highlights
- 130W high-power output for fast heating and recovery
- Two independently controlled irons, each 100°C to 480°C
- PID stabilisation holds ±2°C in static conditions
- LCD display shows real-time temperature readings
- ESD-safe with tip-to-ground resistance under 2 ohm
- Thermal sleep mode helps extend tip and heater life
Ideal For
- SMD and PCB repair technicians working on fine-pitch components
- Mobile and laptop service benches handling small boards
- R&D labs and electronics hobbyists doing repeated rework
- Small production lines needing two temperature profiles at once
Buying Tip
Confirm your mains voltage and plug type match the AC 24V ±10% 50Hz heater specification before ordering, since a plug adapter may be needed for your region.
Elecvora expert review
Our verdict
The 938D+ makes sense for anyone who regularly switches between fine SMD work and heavier joints, because two independently controlled irons remove the tip-swap pause. The 130W output and ±2°C PID stability give it the headroom and repeatability a busy repair bench needs.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Two independent irons with separate temperature settings
- 130W output supports fast heating and recovery
- ±2°C PID stability with clear LCD readout
- ESD-safe grounding figures suited to sensitive ICs
- Thermal sleep mode helps preserve tips and heaters
Cons
- Requires mains power, so it is a bench tool rather than portable
- Only the included irons and tips are specified in the product data
- No calibration or spare tip details are provided
Best for
Bench technicians doing mixed SMD and through-hole repair
Not ideal for
Field work where no mains outlet is available
Specifications
| Item Type | Soldering Irons and Stations |
|---|---|
| Model No. / Name | 938D+ |
| Power Rating | 130 |
| Display Type | LCD |
| Temperature Stability | ±2°C (static) |
| Heater Voltage | AC 24V ±10% 50Hz |
| Tip of ground resistance | <2ohm |
| Tip of ground voltage | <2mV |
| Operating Temperature (°C) | 100℃~480℃ |
| Storage Temperature (°C) | -20°C~80°C |
| Shipping Weight | 3.138 kg |
| Shipping Dimensions | 27 × 22 × 17 cm |
What's in the box
- 1 × YIHUA 938D+ soldering station
- 2 × soldering irons with tips
- 2 × iron stands
- 1 × power cable
- 1 × user manual
Frequently Asked Questions
How many irons can I use at once?
What temperature range does each iron cover?
How accurate is the temperature control?
Is it safe for sensitive components?
What power supply does it need?
What comes in the package?
Overview
The YIHUA 938D+ is a dual-channel soldering station rated at 130W. Instead of one iron, it runs two irons that are controlled separately, so a technician can keep a fine tip set up for small SMD pads while a second iron handles larger joints or ground planes. Switching between tasks no longer means stopping to change tips and wait for the temperature to settle.
Temperature is adjustable from 100°C to 480°C on each channel, with PID control that holds ±2°C in static conditions. The LCD shows live temperature so you can confirm the iron is at the set point before touching a board.
Key Features
- Dual independent channels: each iron has its own temperature setting and readout.
- 130W power: supports fast heat-up and quicker recovery when soldering draws heat away.
- PID stabilisation: ±2°C accuracy in static conditions for consistent joints.
- ESD-safe design: tip-to-ground resistance below 2 ohm and tip-to-ground voltage below 2mV.
- Thermal sleep mode: reduces temperature when idle to help extend tip and heater life.
- Anti-slip iron grip: shaped for comfortable handling during long sessions.
Specifications Explained
The 130W rating is the headline figure: more power available to the heater means the tip returns to temperature faster after each joint. The 100°C to 480°C range covers low-temperature work through to higher settings for heavier solder. The ±2°C static stability figure describes how closely the station holds a set temperature when the iron is not being used, which matters for repeatable work on small components.
The heater runs on AC 24V ±10% at 50Hz, and the grounding figures, under 2 ohm resistance and under 2mV voltage at the tip, describe an ESD-safe setup for sensitive ICs. The LCD gives a clear numeric readout rather than a simple dial. Storage temperature is rated from -20°C to 80°C.
Compatibility and Requirements
The station is supplied with two soldering irons and their tips, plus two iron stands, a power cable and a user manual. The heater is specified for AC 24V ±10% 50Hz operation, so check that your mains supply and plug type match before use. No additional irons or tips beyond those included are specified in the product data.
Typical Uses
The dual-iron layout suits SMD rework, jumper wires, fine-pitch ICs, PCB repair and general electronics assembly. It is equally at home on a repair bench, in an R&D lab or on a small production line where two temperature profiles are useful.
What's in the Box
- 1 × YIHUA 938D+ soldering station
- 2 × soldering irons with tips
- 2 × iron stands
- 1 × power cable
- 1 × user manual
Quick specs
- Item Type
- Soldering Irons and Stations
- Model No. / Name
- 938D+
- Power Rating
- 130
- Display Type
- LCD
- Temperature Stability
- ±2°C (static)
- Heater Voltage
- AC 24V ±10% 50Hz
Explore more
Frequently Bought Together

YIHUA 908+ 60W Electric Adjustable Temperature Soldering Iron Station
$22.99
YIHUA 926LED-III 60W digital soldering iron station with 2 helping hands adjustable soldering iron tools
$30.99
YIHUA 928D-III 110W LED digital display multi-function electric soldering iron
$34.99
YIHUA 929D-II Automatically Solder Wire Feeding Soldering Iron
$40.99
YIHUA 929D-V Electric Vacuum Desoldering Iron Solder Sucker Desoldering Pump Soldering Iron
$13.99
Yihua 938Bd+ Upgrade Version 2In1 SMD Hot Tweezers Soldering Iron Station - 66W
$118.99

















