Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A single 98mm aluminum alloy shock absorber with a bell metal spring, built for 1/10 scale RC cars such as the Traxxas Slash 4x4 SLA014 and SLA015. Its lightweight 24g construction and adjustable spring tension help reduce vibration and keep the chassis balanced on rough ground.

Key Highlights

  • 98mm total length suits many 1/10 scale RC car shock positions
  • Aluminum alloy body paired with a bell metal spring
  • Approximately 5mm ball head aperture for standard mounting
  • About 90mm mounting hole PCD for common shock towers
  • Adjustable spring tension to tune ride firmness
  • Lightweight at roughly 24g per unit

Ideal For

  • Hobbyists maintaining a Traxxas Slash 4x4 SLA014 or SLA015
  • 1/10 scale RC car owners replacing a worn shock absorber
  • Bashers and short-course drivers wanting adjustable spring tension
  • Builders looking for a lightweight metal-bodied damper

Buying Tip

Measure your existing shock's eye-to-eye length and mounting hole spacing before ordering, since this unit is 98mm long with a roughly 90mm mounting PCD and a 5mm aperture.

Elecvora expert review

Our verdict

A sensible, low-cost replacement damper for 1/10 scale cars, with a metal body and adjustable spring tension that make it easy to live with. It is a single unit, so plan your order around how many shocks you actually need to replace.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Aluminum alloy body with bell metal spring
  • Adjustable spring tension for tuning ride firmness
  • Lightweight at about 24g
  • Listed fit for Traxxas Slash 4x4 SLA014 and SLA015

Cons

  • Sold as a single unit, not a full set
  • Compatibility beyond the listed models must be checked by dimensions
  • No ball heads or mounting hardware listed in the package

Best for

Hobbyists replacing or upgrading one shock on a 1/10 scale RC car

Not ideal for

Buyers wanting a complete four-shock set in one purchase

Specifications

Item TypeAccessory
Model No. / NameShock Absorber
MaterialAluminum Alloy body & Bell metal Spring
Additional Specs.Current Handling Capacity (A): 3
No Ball Head Aperture(mm)5mm
Spring Diameter(mm)Approx 17 mm
Total LengthApprox 98 mm / 3.86''
Mounting Hole PCD (mm)Approx 90 mm
Length (mm)10
Width (mm)17 (Body Diameter)
Weight (g)24
Shipping Weight0.027 kg
Shipping Dimensions7 × 5 × 3 cm

What's in the box

  • 1 x 98mm Metal Front/Rear Shock Absorber for RC car (Pack of 1)

Frequently Asked Questions

Is this a complete set of shocks?
No. The package contains one 98mm shock absorber, so you will need to order the quantity your car requires.
Which cars does it fit?
It is listed as fitting the Traxxas Slash 4x4 SLA014 and SLA015 and is described as suitable for most 1/10 scale RC cars. Confirm the 98mm length, 5mm aperture and roughly 90mm mounting PCD against your model.
Can I adjust the spring stiffness?
Yes. The spring tension is adjustable, so you can tune the firmness to suit your driving surface and style.
What is the ball head aperture size?
The no-ball-head aperture is approximately 5mm, which is the opening where the ball head mounts.
How much does one shock weigh?
Each unit weighs approximately 24g, with a shipping weight of about 0.027 kg.
Does it need any power or electronics?
No. It is a mechanical damper with no electrical connection required, though a current handling capacity of 3A is listed among its specifications.

Overview

This 98mm metal shock absorber is a single replacement damper intended for 1/10 scale RC cars, including the Traxxas Slash 4x4 SLA014 and SLA015. It combines an aluminum alloy body with a bell metal spring, giving the unit a firm and stable character that helps absorb vibration from rough surfaces. At approximately 24g, it is light enough to avoid upsetting the balance of a model car while still offering the durability hobbyists expect from a metal-bodied damper.

Key Features

  • Metal construction: Aluminum alloy body with a bell metal spring for a solid, stable feel.
  • CNC-style accuracy: Fine workmanship and a glossy surface finish.
  • Adjustable tension: Tune the spring preload to suit your driving surface and style.
  • Lightweight: Roughly 24g per unit keeps added mass low.
  • Practical dimensions: 98mm total length, 17mm body diameter and a 5mm ball head aperture.

Specifications Explained

The 98mm total length is the overall measurement from end to end, which helps you compare it against the shock currently fitted to your car. The mounting hole PCD of approximately 90mm describes the spacing between the mounting points, so check this against your shock tower before ordering. The 5mm no-ball-head aperture refers to the opening where the ball head mounts, and the 17mm spring diameter gives you an idea of the spring's footprint. Current handling capacity is listed at 3A, and the unit weighs about 24g.

Compatibility and Requirements

This shock absorber is designed for 1/10 scale RC cars and is listed as fitting the Traxxas Slash 4x4 SLA014 and SLA015. It is also described as suitable for most 1/10 remote control cars, but always confirm the 98mm length, 5mm aperture and roughly 90mm mounting PCD match your model before purchase. The package contains one shock absorber, so a full car set will require multiple units.

Typical Uses

Use it as a replacement for a worn or damaged damper, or as an upgrade on a basher, short-course truck or general-purpose 1/10 RC car. The adjustable spring tension makes it useful for tuning how the car behaves on rough ground, and the lightweight build suits hobbyists who want to keep overall weight in check.

What's in the Box

  • 1 x 98mm Metal Front/Rear Shock Absorber for RC car (Pack of 1)

Quick specs

Item Type
Accessory
Model No. / Name
Shock Absorber
Material
Aluminum Alloy body & Bell metal Spring
Additional Specs.
Current Handling Capacity (A): 3
No Ball Head Aperture(mm)
5mm
Spring Diameter(mm)
Approx 17 mm
See all specifications