Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A four-leg ABS plastic landing gear set for Q450 and S500 quadcopter frames that raises the frame for underslung cameras, gimbals or batteries. The full set weighs about 75 g and includes eight M2.5 x 8 mm mounting screws.

Key Highlights

  • Four-leg set molded in black ABS plastic
  • 190 mm leg length with roughly 150 mm ground clearance
  • Light set at about 75 g total
  • Fits Q450 and S500 frames and similar large frames
  • Skid-style feet for steadier landings
  • Eight M2.5 x 8 mm screws included

Ideal For

  • Builders finishing a Q450 or S500 quadcopter frame
  • Pilots mounting a camera, gimbal or battery under the frame
  • Owners replacing damaged legs on a large quadcopter
  • Hobbyists who want a light landing base for test flights
  • Makers assembling multirotor frames from parts

Buying Tip

Measure the mounting hole spacing on your frame and compare it with the gear before ordering, since the supplied M2.5 x 8 mm screws only suit matching holes.

Elecvora expert review

Our verdict

A straightforward, light landing gear set that does one job well: lifting a large quadcopter frame so equipment can be mounted underneath. The ABS build and included screws make it an easy swap for damaged legs or a simple finishing part for a Q450 or S500 build.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Light at about 75 g for the set
  • Four-leg stance gives a stable base
  • Fits Q450 and S500 frames
  • Mounting screws included
  • Keeps the underside clear for accessories

Cons

  • ABS plastic can crack in hard impacts
  • Only suits frames with matching mounting holes
  • No instruction sheet or dimension drawing included in the listing

Best for

Builders of Q450 and S500 frames who need a light landing base

Not ideal for

Pilots flying small frames or frames with different mounting patterns

Specifications

Item TypeAccessory
Model No. / NameLanding Gear
MaterialABS Plastic
ColorBlack
Length (mm)190
CompatibilityQ450 and S500 Frames
Weight (g)75
Shipping Weight0.12 kg
Shipping Dimensions25 × 6 × 4 cm

What's in the box

  • 1 x ABS plastic 4-leg landing gear set
  • 1 x accessory set with 8 x M2.5 x 8 mm screws

Frequently Asked Questions

Which frames does this landing gear fit?
It is listed for Q450 and S500 frames as well as other large-size frames. Check your frame's mounting holes before ordering.
How much ground clearance does it give?
The legs are 190 mm long and are designed to provide around 150 mm of clearance under the frame, leaving room for underslung equipment.
What is included with the set?
You get one four-leg landing gear set plus an accessory set containing eight M2.5 x 8 mm screws.
Does it need power or wiring?
No. It is a mechanical plastic part with no electronics, so there is nothing to wire or power.
How much does it weigh?
The full set weighs about 75 g, and the packed shipping weight is around 0.12 kg.
How should I care for the legs?
Wipe them clean with a damp cloth and check the mounting screws and leg joints regularly for cracks or looseness, especially after hard landings.

Overview

This landing gear set gives a quadcopter a stable four-point base and keeps the underside of the frame clear. The legs are molded in black ABS plastic, measure 190 mm, and the complete set weighs about 75 g. That combination is aimed at builders who want clearance under the frame without carrying unnecessary weight.

With the gear fitted, the area beneath the frame stays open, so a camera, gimbal or battery can be mounted low without sitting on the ground. The skid-style feet help the craft rest steadily on flat surfaces during takeoff and landing.

Key Features

  • Four-leg design: a wide, stable stance instead of a narrow two-leg setup.
  • ABS plastic construction: a molded material that keeps the parts light and consistent in shape.
  • 190 mm legs: enough length to lift the frame and free up the underside.
  • Light footprint: about 75 g for the set.
  • Skid-style feet: molded ends that help the craft sit level on smooth ground.
  • Mounting hardware included: eight M2.5 x 8 mm screws are supplied.

Specifications Explained

Length and clearance

Each leg is 190 mm long. In practice this raises the frame enough to leave the bottom area open for underslung equipment, while keeping the overall profile compact for transport.

Weight

At roughly 75 g for all four legs, the gear adds little to the all-up weight of a large frame. That matters on builds where every gram affects flight time and handling.

Material and colour

ABS plastic is molded into shape, so the legs hold a consistent profile and finish. The black colour blends with most carbon and glass fibre frames.

Shipping figures

The packed set weighs about 0.12 kg and ships in a box measuring 25 x 6 x 4 cm, which is useful to know when planning storage or spares.

Compatibility and Requirements

The gear is listed for Q450 and S500 frames and other large-size frames. Check that your frame has mounting points that line up with the gear before fitting. The supplied M2.5 x 8 mm screws suit frames with matching hole sizes; if your frame uses different hardware, you will need your own fasteners. No other electronics or power connections are involved, since this is a purely mechanical part.

Typical Uses

  • Finishing a Q450 or S500 build with a proper landing base.
  • Fitting a camera, gimbal or battery underneath the frame.
  • Replacing cracked or missing legs on an existing quadcopter.
  • Keeping the frame off the ground during test hops and tuning flights.

What's in the Box

  • 1 x ABS plastic 4-leg landing gear set
  • 1 x accessory set with 8 x M2.5 x 8 mm screws

Quick specs

Item Type
Accessory
Model No. / Name
Landing Gear
Material
ABS Plastic
Color
Black
Length (mm)
190
Compatibility
Q450 and S500 Frames
See all specifications