
1 / 4 · Click to enlarge
AI Summary
The HGLRC Talon is a 106 mm cinewhoop frame kit with a 2 mm carbon plate, molded protective shell and ducted guards. Its modular layout keeps the image transmission, power system and shell separate for easier assembly.
Key Highlights
- 106 mm wheelbase frame for 2-inch propeller builds
- 2 mm carbon fiber bottom plate with molded protective shell
- Modular design separates image transmission, power system and shell
- Supports 10-20 mm cameras with silicone shock-absorbing pads
- Dual image transmission mounts at 25.5 x 25.5 mm and 20 x 20 mm
- Includes CNC heat sink, pre-installed LEDs and full hardware set
Ideal For
- Cinewhoop builders assembling a protected 2-inch quad
- FPV pilots who fly indoors and in tight outdoor spaces
- Makers who want a modular frame with clear component sections
- Pilots planning HD or analog image transmission builds
- Creators who want to carry a naked GoPro on a small platform
Buying Tip
Check your flight controller, motor and image transmission mounting patterns against the 25.5 x 25.5 mm, 9 x 9 mm and 20 x 20 mm positions before ordering, since the frame kit does not include electronics.
Elecvora expert review
Our verdict
The Talon is a thoughtfully organized 2-inch cinewhoop frame that makes assembly and maintenance easier by separating the shell, power system and image transmission. Its included hardware and thermal parts add real value for builders who already have the electronics.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Modular layout simplifies assembly and servicing
- Dual image transmission mounting options
- Camera damping sheets and CNC heat sink included
- Comprehensive fastener and cable kit
- Light 46 g frame with protective guard
Cons
- Electronics, motors and propellers are not included
- Builders must confirm their own mounting patterns
- Small fasteners require careful handling during assembly
Best for
Builders assembling a protected 2-inch cinewhoop for smooth cinematic flying
Not ideal for
Pilots wanting a ready-to-fly drone or a larger open-prop freestyle frame
Specifications
| Item Type | Accessory |
|---|---|
| Model No. / Name | Drone Frame |
| Wheelbase | 106 mm |
| Weight (g) | 46 |
| Material | Carbon Fiber |
| Support camera | 10-20 mm |
| Bottom plate | 2 mm |
| Item Size | 150 x 170 mm |
| Shipping Weight | 0.211 kg |
| Shipping Dimensions | 29 × 22 × 8 cm |
What's in the box
- 1 x Protective guard
- 1 x Bottom shell
- 1 x Frame carbon plate
- 1 x Silicone image transmission cover
- 2 x CNC battery tie buckle
- 1 x Antenna mount
- 1 x Camera mount
- 2 x LED (pre-installed on the guard)
- 2 x Battery anti-skid pad
- 2 x 0.5 mm camera silicone sheet
- 1 x 1.0 mm camera silicone sheet
- 1 x Thermal grease (for HD)
- 1 x Thermal grease sheet (for Zeus 800mw image transmission)
- 2 x Net-shaped aluminum column M2X20
- 20 x Counter-sunk hexagon socket M2X4
- 4 x Counter-sunk hexagon socket M2X6
- 8 x Counter-sunk hexagon socket M2X8
- 4 x Counter-sunk hexagon socket M2X10
- 4 x Counter-sunk hexagon socket M2X12
- 4 x Semi-circular hexagon socket M1.6X10
- 6 x Semi-circular hexagon socket M2X6
- 1 x Semi-circular hexagon socket M2X16
- 1 x Anti-loosening self-locking M2 nut
- 8 x Hexagon M2 black nylon nut
- 2 x Battery tie 10X150mm
- 1 x Air docking cable 6P6 line
- 1 x Air docking cable 6P4 line
- 1 x Air docking cable flight control end
- 1 x Frequency matching and card removal pin ejector
- 1 x 32AWG red 120mm
- 1 x 32AWG yellow 120mm
- 1 x 32AWG black 120mm
- 1 x 32AWG red 80mm
- 1 x 32AWG yellow 80mm
- 1 x 32AWG black 80mm
Frequently Asked Questions
What is included in the Talon frame kit?
What size propellers does the frame use?
Which cameras fit the Talon frame?
What image transmission mounting patterns are supported?
Can the frame carry a GoPro?
What motors and flight controller mounting does it use?
Overview
The HGLRC 2-inch Talon Frame is a compact cinewhoop platform for builders who want a protected 2-inch quad with a clean, modular layout. The frame uses a 2 mm carbon fiber bottom plate paired with a molded shell that wraps the internals, giving the build a smooth, enclosed look while keeping the structure light at around 46 g.
Rather than locking every component into one stack, the Talon separates the image transmission system, the power system and the frame shell into independent assemblies. That makes the bare frame easier to read during a build and lets you plan each section before final assembly.
Key Features
- Ducted guard design: the included protective guard surrounds the props for a 2-inch setup, useful when flying near people or objects.
- Modular architecture: image transmission, power system and shell are separate, simplifying assembly and maintenance.
- Flexible camera support: accepts 10-20 mm cameras, with silicone pads for 19 mm and 20 mm camera sizes to help stabilize footage.
- Dual VTX mounting: 25.5 x 25.5 mm and 20 x 20 mm positions cover a range of HD and analog image transmission systems.
- Thermal care: a CNC metal heat sink and thermal grease are included to help manage image transmission temperatures.
- LED lighting: two LEDs come pre-installed on the guard for visibility.
Specifications Explained
The 106 mm wheelbase sets the overall footprint and is matched to 2-inch propellers. The 2 mm carbon bottom plate provides the structural base, while the molded shell adds protection and shape. At 46 g, the frame keeps the build light, which matters for small cinewhoop handling.
Mounting patterns are the details that decide what fits: flight control at 25.5 x 25.5 mm, motors at 9 x 9 mm, and image transmission at either 20 x 20 mm or 25.5 x 25.5 mm. The external size of 150 x 170 mm gives a clear idea of the assembled footprint.
Compatibility and Requirements
Use 2-inch propellers, a flight controller with 25.5 x 25.5 mm mounting, motors with 9 x 9 mm mounting, and an image transmission system matching the 20 x 20 mm or 25.5 x 25.5 mm positions. Cameras from 10-20 mm are supported. The kit includes silicone sheets in 0.5 mm and 1.0 mm thicknesses plus thermal grease for HD setups and a thermal grease sheet for the Zeus 800mw image transmission.
Typical Uses
The Talon suits smooth cinematic flying, indoor passes, close-range outdoor shots and protected practice sessions where a guarded 2-inch quad is preferable to an open-prop build. It can also carry a naked GoPro according to the manufacturer, which supports higher-quality capture.
What's in the Box
The package includes the protective guard, bottom shell, carbon frame plate, silicone image transmission cover, two CNC battery tie buckles, antenna mount, camera mount, two pre-installed LEDs, two battery anti-skid pads, camera silicone sheets, thermal grease and grease sheet, aluminum columns, a full set of M1.6 and M2 screws, nuts, battery ties, air docking cables, a pin ejector tool, and 32AWG wires in red, yellow and black at 120 mm and 80 mm lengths.
Quick specs
- Item Type
- Accessory
- Model No. / Name
- Drone Frame
- Wheelbase
- 106 mm
- Weight (g)
- 46
- Material
- Carbon Fiber
- Support camera
- 10-20 mm



















