Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 17g 1800KV brushless motor for 3-5 inch FPV freestyle quads, rated for 4-6S input. It combines a 7075 aluminum one-piece rotor with N52H magnets and 200°C copper winding for stable torque and quick throttle response.

Key Highlights

  • 1800KV winding designed for 4-6S FPV builds
  • 7075 aviation aluminum one-piece rotor for rigidity
  • Custom N52H curved magnets deliver strong torque
  • 200°C rated copper winding for stable running
  • Imported Kawasaki silicon steel stator reduces losses
  • 17g weight including wire keeps builds light

Ideal For

  • FPV freestyle pilots building 3-5 inch quads
  • Pilots running 4-6S setups who want an 1800KV motor
  • Builders looking for a light 17g motor with strong torque
  • Acro flyers who value linear throttle response
  • Makers needing a compact 2004-size brushless motor

Buying Tip

Confirm your frame uses a 4xM2 motor mount at 12mm spacing and that your ESC is rated above 25A before ordering.

Elecvora expert review

Our verdict

A well-specified 2004 motor that balances light weight with the torque and thermal headroom freestyle pilots look for. The 1800KV winding and 4-6S range make it a flexible pick for 3-5 inch builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Light 17g weight including wire
  • 7075 aluminum one-piece rotor for rigidity
  • N52H magnets and 200°C winding for stable output
  • Linear throttle response with quick turn-in
  • Mounting screws included

Cons

  • Requires an ESC rated above 25A, sold separately
  • Bluetooth 5.1 support depends on your own compatible setup
  • Propellers and battery are not included

Best for

Freestyle pilots flying 3-5 inch quads on 4-6S

Not ideal for

Builders needing a motor outside the 2004 size or 4xM2 12mm mount pattern

Specifications

Motor KV (RPM/V)1800 KV
Motor TypeBrushless Motor
Bluetooth VersionSupports Bluetooth 5.1 dual mode function
Shipping Weight0.025 kg
Shipping Dimensions6 × 6 × 4 cm

What's in the box

  • 1 x 2004 1800KV motor
  • 5 x M2 x 6mm screws
  • 5 x M2 x 7mm screws

Frequently Asked Questions

What voltage can this motor run on?
HGLRC lists an input range of 14.8-25.2V, which covers 4S through 6S battery packs.
Which propellers should I use?
The recommended propeller size is 3 to 5 inches. Stay within that range for the 1800KV winding.
What ESC do I need?
The motor is listed with a maximum continuous current of 19.3A at 5S, and HGLRC specifies an ESC rated above 25A.
Does the package include screws?
Yes, you get 5 x M2 x 6mm screws and 5 x M2 x 7mm screws along with the motor.
What is the mounting hole pattern?
The mounting holes are 4xM2 with 12mm spacing, so your frame must use the same pattern.
How much does the motor weigh?
It weighs 17g including the wire.

Overview

The HGLRC SPECTER 2004 1800KV is a brushless FPV motor aimed at freestyle pilots flying 3 to 5 inch propeller setups. It uses a 2004 stator size, a 12N14P slot-pole configuration and an 1800KV winding that is intended for 4-6S input voltage. The motor weighs 17g including its wire, so it suits builds where saving weight matters but output still needs to be strong.

Key Features

  • One-piece 7075 aviation aluminum rotor: a high-strength rotor construction with an anodized two-color finish.
  • Custom N52H curved magnets: strong magnetism for high torque output.
  • 200°C copper winding: a high temperature rating that supports more stable running.
  • Imported Kawasaki silicon steel sheets: a low-loss stator design intended to reduce heat and improve efficiency.
  • Alloy steel outlet shaft: high strength with reduced fuselage weight.
  • Optimized tuning: maintains torque at low speed, gives linear output during rapid throttle changes and responds quickly when turning.

Specifications Explained

The 1800KV rating describes RPM per volt, so the motor spins faster as input voltage rises; HGLRC lists an input range of 14.8-25.2V, covering 4S through 6S packs. Maximum continuous current is 19.3A at 5S, with maximum power listed at 463W, which helps you match an ESC rated above 25A. The 12N14P stator layout and N52H magnets are the core of the torque character, while the 200°C winding rating speaks to thermal headroom rather than a performance guarantee. The motor measures roughly 32.4mm across and 13.15mm tall, with a 4xM2 mounting pattern at 12mm spacing.

Compatibility and Requirements

Use an ESC rated above 25A and match the motor to 3-5 inch propellers. Input voltage must stay within 14.8-25.2V (4-6S). The 4xM2 mounting holes at 12mm spacing must match your frame's motor mount pattern. HGLRC also lists Bluetooth 5.1 dual mode support, so check your own setup for the matching Bluetooth feature before relying on it.

Typical Uses

This motor fits freestyle quads in the 3 to 5 inch class where quick throttle response and low-speed torque are useful for tricks, proximity flying and general acro practice. Its light 17g weight also makes it reasonable for builds that prioritize agility.

What's in the Box

  • 1 x 2004 1800KV motor
  • 5 x M2 x 6mm screws
  • 5 x M2 x 7mm screws

Quick specs

Motor KV (RPM/V)
1800 KV
Motor Type
Brushless Motor
Bluetooth Version
Supports Bluetooth 5.1 dual mode function
Shipping Weight
0.025 kg
Shipping Dimensions
6 × 6 × 4 cm
See all specifications