
1 / 4 · Click to enlarge
AI Summary
A2212 10T 1400KV brushless motor bundle with a SimonK 30A ESC, four prop adapters, X-type mount and screws. It offers a lightweight 62 g power solution for drones, quadcopters and RC aircraft on 2S to 3S LiPo.
Key Highlights
- 1400KV brushless motor with 14 poles for smooth throttle response
- Includes SimonK 30A ESC with on-board BEC
- Runs on 2S to 3S LiPo batteries
- 16A current capacity for 60-second bursts
- 62 g motor weight with 3.17 mm shaft
- Comes with 4 prop adapters, X-type mount and screws
Ideal For
- Hobbyists building small quadcopters and multirotors
- RC airplane pilots needing a lightweight 1400KV motor
- Makers designing custom UAV or drone frames
- Budget-conscious builders wanting a motor and ESC bundle
- Beginners assembling their first brushless power system
Buying Tip
Check that your frame accepts a 3.17 mm shaft and an X-type mount, and confirm your prop size suits a 1400KV motor on your chosen 2S or 3S LiPo before buying.
Elecvora expert review
Our verdict
A dependable entry-level motor and ESC bundle that delivers smooth performance for small drones and RC planes at a low cost. The included mounting hardware and pre-soldered connector make it easy to get a build airborne.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Lightweight 62 g motor suits many small frames
- Includes matched 30A ESC and mounting hardware
- Pre-soldered connector speeds up assembly
- 14-pole design gives smooth throttle response
Cons
- Propellers and battery not included
- Requires soldering or wiring for power connections
- Limited to 2S-3S LiPo, so not for high-voltage setups
Best for
Small quadcopters, multirotors and RC airplanes on 2S-3S LiPo
Not ideal for
High-performance or large-scale builds needing higher voltage and current
Specifications
| Motor KV (RPM/V) | 1400 KV |
|---|---|
| Motor Type | Brushless Motor |
| Compatible LiPO Batteries | 2S to 3S |
| Model No. / Name | A2212 10T/13T |
| Current Capacity (A) | 16A/60S |
| No-load current (A) | 0.7A @10V |
| No of poles | 14 |
| Max. Efficiency Current (A) | 06-12A |
| Shaft Diameter | 3.17 mm |
| Length (mm) | 27.5 |
| Width (mm) | 26.5 |
| Weight (g) | 62 |
| Shipping Weight | 0.08 kg |
| Shipping Dimensions | 8 × 5 × 2 cm |
What's in the box
- 1 x A2212 10T 1400KV Brushless Motor
- 1 x SimonK 30A BLDC ESC
- 4 x Prop Adapter
- 1 x X-type Motor Holder
- Set of screws
Frequently Asked Questions
What battery should I use with this motor and ESC?
Does the motor come with a propeller?
Is the motor pre-soldered?
What is the maximum current of the motor?
Can I use this motor on a 4S battery?
What is included in the package?
Overview
The A2212 10T 1400KV brushless motor and SimonK 30A ESC bundle gives builders a straightforward way to power lightweight drones, quadcopters, multirotors, RC airplanes and UAVs. The motor is a 14-pole brushless outrunner with a 3.17 mm shaft, a compact 26.5 mm body width and a 27.5 mm length. At 62 g, it adds little weight to a frame while providing the thrust needed for small to mid-size builds. The included SimonK 30A ESC is pre-matched to the motor and comes with a pre-soldered connector for a fast, direct link between the two components. Four prop adapters, an X-type motor holder and a set of screws are also in the box, covering the basic mounting hardware for a typical build.
Key Features
- 1400KV rating for a balance of speed and torque on 2S to 3S LiPo packs
- 14-pole brushless design for smooth, efficient operation
- SimonK 30A ESC with on-board BEC for faster and better speed control
- Pre-soldered connector simplifies the motor-to-ESC connection
- Solid metal case for durability in everyday flying conditions
- Lightweight 62 g motor suits a wide range of multirotor frames
Specifications Explained
The 1400KV rating means the motor spins approximately 1400 RPM per volt applied, so on a 3S LiPo (nominally 11.1 V) it can reach around 15,500 RPM under load-free conditions. The 14-pole configuration contributes to smoother commutation and finer throttle resolution. Current capacity is 16 A for up to 60 seconds, while maximum efficiency current sits between 6 A and 12 A, so most cruising flight will fall in an efficient range. No-load current is 0.7 A at 10 V, a useful figure for estimating idle draw. The 3.17 mm shaft matches common prop adapters, and the 26.5 mm width and 27.5 mm length keep the motor compact enough for tight frame layouts.
Compatibility and Requirements
Use the motor with 2S to 3S LiPo batteries only. The supplied SimonK 30A ESC is intended to handle the motor's current demands and includes an on-board BEC. You will need your own propellers, radio system, flight controller or receiver, and a suitable LiPo battery to complete a build. The pre-soldered connector links motor and ESC directly, but you should still check polarity and bullet connector fit before powering up. The X-type motor holder and screws are included for mounting to a frame.
Typical Uses
This motor and ESC combination is suited to small quadcopters, multirotor frames, fixed-wing RC airplanes and general UAV projects. It is a common choice for scratch-built drones where a lightweight, low-cost power system is needed. The smooth throttle response helps with stable hovering and controlled climbs, while the 1400KV wind is flexible enough for sporty airplane setups on 3S.
What's in the Box
- 1 x A2212 10T 1400KV brushless motor
- 1 x SimonK 30A BLDC ESC
- 4 x prop adapter
- 1 x X-type motor holder
- Set of screws
Quick specs
- Motor KV (RPM/V)
- 1400 KV
- Motor Type
- Brushless Motor
- Compatible LiPO Batteries
- 2S to 3S
- Model No. / Name
- A2212 10T/13T
- Current Capacity (A)
- 16A/60S
- No-load current (A)
- 0.7A @10V
Frequently Bought Together

F450 / Q450 Quadcopter Frame – PCB Version Frame Kit with Integrated PCB – Made in INDIA
$13.99
F450 / Q450 Quadcopter Frame(PCB Version with Integrated PCB) + Plastic Landing Gear Combo Kit – Made in INDIA
$14.99
APM 2.8 Flight Controller with Built-in Compass
$64.99
Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot - Good Quality
$89.99
Pro-Range Propellers 1045(10X4.5) Glass Fiber Nylon Black 1CW+1CCW-1pair
$7.99












