
1 / 16 · Click to enlarge
AI Summary
A 450 mm quadcopter frame kit with an integrated PCB power distribution board, glass fiber boards and tough nylon arms. It ships with ABS landing gear and lets you solder ESCs directly to the frame for a cleaner, faster build.
Key Highlights
- 450 mm wheelbase frame with integrated PCB power distribution board
- Glass fiber top and bottom boards for a stiff, durable platform
- Moulded polyamide-nylon arms with support ridges for forward flight
- Pre-threaded brass sleeves and 3 mm motor mount holes
- Includes four arms in red and white plus ABS landing gear
- Approximately 330 g frame weight for a light 450-class build
Ideal For
- Hobbyists building a first 450-class quadcopter
- Sport and practice pilots who want a simple, robust airframe
- Builders who prefer soldering ESCs to an integrated board
- Makers assembling a camera-capable 450 platform
Buying Tip
Check that your motors use 3 mm mounting holes and that your ESCs fall in the 15-40 A range before ordering, since neither is included.
Elecvora expert review
Our verdict
A practical 450-class frame that removes a separate power distribution board and speeds up assembly. The glass fiber and nylon construction is sensible for the price, and the included landing gear is a useful addition.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated PCB simplifies ESC wiring
- Tough nylon arms with support ridges
- Glass fiber plates with camera mounting tabs
- Landing gear included in the kit
Cons
- Soldering is required for ESC power connections
- Motors, ESCs, propellers and battery are not included
- Frame weight and dimensions may vary by about 5%
Best for
Builders of a simple, tidy 450-class quadcopter
Not ideal for
Pilots wanting a ready-to-fly aircraft or a folding frame
Specifications
| Item Type | Kit, Frame |
|---|---|
| Model No. / Name | Quadcopter Frame |
| Material | Polyamide Nylon, Glass Fiber |
| Wheelbase | 450 mm |
| Arm Size (L x W) | 220 x 40 |
| Landing Gear Material | ABS |
| Landing Gear Height (mm) | 200 |
| Motor Mount Hole Dia. (mm) | 3 |
| Weight (g) | 330 |
| Shipping Weight | 0.34 kg |
| Shipping Dimensions | 25 × 4 × 1 cm |
What's in the box
- 1 x F450/Q450 PCB top and bottom board
- 4 x arms (2 red, 2 white)
- 1 x ABS plastic landing gear set
- 1 x accessories set
Frequently Asked Questions
Is a power distribution board needed?
What motors and ESCs should I use?
Which battery and propellers fit?
Is the landing gear included?
Do I need to solder anything?
What is the wheelbase and weight?
Overview
The F450/Q450 PCB frame is a 450 mm wheelbase quadcopter platform aimed at builders who want a straightforward, robust airframe without extra wiring clutter. The top and bottom plates are made from glass fiber, while the four arms are moulded in polyamide nylon with support ridges running along their length. Those ridges add stiffness where it matters and help the frame track cleanly in forward flight.
The defining feature of this version is the integrated printed circuit board. Instead of mounting a separate power distribution board, you solder your ESC power leads directly to the frame, which shortens the wiring loom and keeps the centre of the craft tidy.
Key Features
- Integrated PCB: distributes power to the ESCs without an add-on board.
- Glass fiber plates: stiff top and bottom boards with large mounting tabs for a camera.
- Nylon arms: thick moulded arms with support ridges and 3 mm motor mount holes.
- Pre-threaded brass sleeves: ready for bolting the arms and plates together.
- Colour-coded arms: two red and two white arms simplify orientation in the air.
- Landing gear included: ABS plastic gear with a 200 mm height for ground clearance.
Specifications Explained
Wheelbase (450 mm) is the diagonal distance between motor centres. This is the familiar 450-class size, large enough for stable sport flying and light camera work, yet easy to transport.
Arm size (220 x 40 mm) gives a wide, rigid arm profile. Combined with the polyamide-nylon material, this is intended to reduce breakage at the motor mounts after a hard landing.
Frame weight (about 330 g) leaves reasonable headroom for motors, ESCs, battery and payload within a typical 450-class setup.
Motor mount holes (3 mm) match common brushless motors in the recommended 800-1100 KV range.
Landing gear height (200 mm) lifts the frame clear of the ground, protecting the underside board and giving room for a battery strap underneath.
Compatibility and Requirements
Elecvora recommends 1045 or 8045 propellers, a 3S LiPo battery between 1800 and 3600 mAh, ESCs rated 15 A to 40 A, and brushless motors in the 800-1100 KV range. These items are not included, so plan them into your build. Soldering is required to connect ESC power leads to the integrated board.
Typical Uses
This frame suits general-purpose 450-class quadcopter builds, sport and practice flying, and a first scratch build where simple assembly and tidy wiring are priorities. It is also a practical choice for builders who prefer a frame with a built-in power board over a separate PDB.
What's in the Box
- 1 x F450/Q450 PCB top and bottom board
- 4 x arms (2 red, 2 white)
- 1 x ABS plastic landing gear set
- 1 x accessories set
Note: dimensions and weight may vary by approximately 5%.
Quick specs
- Item Type
- Kit, Frame
- Model No. / Name
- Quadcopter Frame
- Material
- Polyamide Nylon, Glass Fiber
- Wheelbase
- 450 mm
- Arm Size (L x W)
- 220 x 40
- Landing Gear Material
- ABS
Explore more
Frequently Bought Together

Nylon Cable Zip Ties 200mm White (Pack of 100) - Heavy-Duty Multipurpose Cable Management & Electrical Wire Fastening Straps
$6.99
F450 F550 / Q450 Q550 Replacement Arm Black (220mm) – Made in INDIA
$6.99
F450 F550 / Q450 Q550 Replacement Arm White (220mm) – Made in INDIA
$6.99
F450 F550 / Q450 Q550 Replacement Arm Red (220mm) – Made in INDIA
$6.99
ABS Plastic 4 leg Landing Gear for Quadcopter - Made in INDIA
$7.99












