
1 / 4 · Click to enlarge
AI Summary
This red 220mm replacement arm fits F450 F550 and Q450 Q550 multirotor frames and is made from polyamide nylon with glass fiber. It lets you replace a single crash-damaged arm instead of the whole frame.
Key Highlights
- Single red replacement arm for F450 F550 and Q450 Q550 frames
- Made from polyamide nylon with glass fiber for strength
- Lightweight at approximately 50g per arm
- 220mm length with 3mm motor mount holes
- Designed for a direct fit with matching PCB plates
- Also available in black and white colour options
Ideal For
- Multirotor hobbyists repairing a crash-damaged F450 or F550 frame
- Builders assembling a Q450 or Q550 frame from parts
- Drone pilots who keep spare arms in their field kit
- Makers and students building low-cost multirotor projects
- Repair shops servicing common 450 and 550 class frames
Buying Tip
Check your motor's mounting hole spacing and your frame's arm length before ordering, since this arm is 220mm long with 3mm motor mount holes.
Elecvora expert review
Our verdict
A sensible, low-cost spare for anyone flying an F450, F550, Q450 or Q550 frame. The nylon and glass fiber build keeps weight down while giving the arm enough stiffness for normal sport flying.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Direct replacement for common 450 and 550 class frames
- Lightweight at around 50g
- Glass fiber reinforced nylon construction
- Available in three colours
Cons
- Sold as a single arm only
- Motor, screws and frame hardware not included
Best for
Repairing or building 450 and 550 class multirotor frames
Not ideal for
Pilots needing arms for other frame sizes or motor hole patterns
Specifications
| Item Type | Accessory |
|---|---|
| Model No. / Name | Replacement Arm |
| Material | Polyamide Nylon, Glass Fiber |
| Color | Red |
| Motor Mount Hole Dia. (mm) | 3 |
| Dimensions (L x W x H) mm | 220×40 |
| Weight (g) | 50 |
| Shipping Weight | 0.055 kg |
| Shipping Dimensions | 23 × 4 × 4 cm |
What's in the box
- 1 x Replacement Arm for F450 F550 / Q450 Q550 (Red)
Frequently Asked Questions
Which frames does this arm fit?
Is this sold as one arm or a set?
What motors can I mount on it?
How much does the arm weigh?
Are other colours available?
Do I need to solder anything?
Overview
Crash landings usually hit the arms first, which is why detachable arms are so useful on multirotor frames. This red replacement arm is a direct spare for F450 F550 and Q450 Q550 frames, so a single damaged arm does not mean retiring the whole build. It is made from polyamide nylon with glass fiber, giving a light yet rigid structure that suits everyday sport and practice flying.
Each arm measures 220mm long and 40mm wide and weighs roughly 50g, keeping the frame's weight close to the original setup. The motor mount holes are 3mm in diameter, matching common motor mounting patterns used on these frame sizes.
Key Features
- Single replacement arm in red for F450 F550 / Q450 Q550 frames
- Polyamide nylon and glass fiber construction
- Lightweight design at around 50g per arm
- 220 x 40mm dimensions with 3mm motor mount holes
- Shaped for a close fit with the matching PCB plates
- Available in black and white as alternative colours
Specifications Explained
Material
The polyamide nylon and glass fiber blend gives the arm a stiff feel while keeping weight down. This matters on a multirotor, where every gram affects flight feel and motor load.
Size and weight
At 220mm long and 40mm wide, the arm matches the standard length used on these frame families, so geometry and motor spacing stay consistent. The 50g weight is light enough that swapping one arm should not noticeably change balance.
Motor mount holes
The 3mm holes suit motors with matching mounting screws. Check your motor's hole spacing against the arm before fitting.
Compatibility and Requirements
This arm is intended for F450 F550 and Q450 Q550 multirotor frames. It is designed to fit with the corresponding PCB plates. You will need your existing motor, screws and frame hardware to complete the installation, as only the arm is supplied.
Typical Uses
Ideal for repairing a quad after a crash, keeping a spare in your field kit, or building a frame from individual parts. Hobbyists who fly regularly often keep one or two arms on hand so a hard landing does not end a flying session.
What's in the Box
- 1 x Replacement Arm for F450 F550 / Q450 Q550 (Red)
Quick specs
- Item Type
- Accessory
- Model No. / Name
- Replacement Arm
- Material
- Polyamide Nylon, Glass Fiber
- Color
- Red
- Motor Mount Hole Dia. (mm)
- 3
- Dimensions (L x W x H) mm
- 220×40
Explore more
Frequently Bought Together

F550 / Q550 Hexa-Copter Frame, Landing Gears and Integrated PCB Kit – Made in INDIA
$26.99
F450 F550 Frame Landing Gear Landing Skid
$11.99
F450 F550 / Q450 Q550 Replacement Arm Black (220mm) – Made in INDIA
$6.99
F450 F550 / Q450 Q550 Replacement Arm White (220mm) – Made in INDIA
$6.99
ABS Plastic 4 leg Landing Gear for Quadcopter - Made in INDIA
$7.99












