Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This drone flight controllers is a good fit for RC and FPV hobbyists. Main specs: item type Flight Controller; power supply voltage (v) LP2985-3.3.; port MUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output).. Check that your power source supplies LP2985-3.3. before connecting it.

Key Highlights

  • Item Type: Flight Controller
  • Power Supply Voltage (V): LP2985-3.3.
  • Port: MUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output).

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Item TypeFlight Controller
Power Supply Voltage (V)LP2985-3.3.
PortMUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output).
Input Voltage (V)12~16 VDC
Sensor3-Axis Gyrometer, Accelerometer, High-performance Barometer
ProcessorATMEGA2560 and ATMEGA32U-2
Micro SD Card Slot (Y/N)No
Dimensions (L x W x H) mm70 x 45 x 15
Weight (g)82
Shipping Weight0.085 kg
Shipping Dimensions9 × 3 × 2 cm

Overview

The APM 2.8 Flight Controller with Built-in Compass is listed in our drone flight controllers range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Flight Controller
  • Power Supply Voltage (V): LP2985-3.3. (match this to your power supply; too high a voltage can damage the part)
  • Port: MUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output). (confirm your cable or board uses the same connector)
  • Input Voltage (V): 12~16 VDC (match this to your power supply; too high a voltage can damage the part)
  • Sensor: 3-Axis Gyrometer, Accelerometer, High-performance Barometer (space for firmware, files or media)
  • Processor: ATMEGA2560 and ATMEGA32U-2 (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Micro SD Card Slot (Y/N): No
  • Dimensions (L x W x H) mm: 70 x 45 x 15 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Are you want to be an Electronic Geek in the future and want to build your own drone then this Flight controller is best for you. The flight controller uses the data gathered by the sensors to calculate the desired speed for each of the four motors. The flight controller sends this desired speed to the Electronic Speed Controllers (ESC's), which translates this desired speed into a signal that the motors can understand. This flight controller

APM 2.8 Multicopter Flight Controller is an upgraded version of 2.5 and 2.6 with a Built-in Compass for FPV RC Drone. The sensors are exactly the same as the APM 2.6 flight controller. However, the module has the option to use the built-in compass an external compass via a jumper. This makes the APM 2.8 ideal for use with multi-copters and rovers.

The APM 2.8 Multicopter Flight Controller is a complete open source autopilot system. This is the best-selling technology that won the prestigious Outback Challenge UAV competition. It allows the user to turn any fixed, rotary-wing. In addition, it turns multirotor vehicles (even cars and boats) into a fully autonomous vehicle. meanwhile, it is capable of performing programmed GPS missions with waypoints.

To Explore more Flight Controllers, Click here To Calibrate APM 2.8 flight controller Using Mission planner, Click here    

APM Flight controller Using the built-in compass:

To use the built-in compass simply connect the jumper as shown below. The APM board will use the external compass, during the compass jumper is removed.

apm-internal-compass-Elecvora.in

Powerful ground control software features:

The downloadable mission planner software is used to configure and control your APM board:
  1. Point-and-click waypoint entry, using Google Maps.
  2. Select mission commands from drop-down menus.
  3. Download mission logs files and analyzes them.
  4. Configure APM settings for your airframe.
  5. Interface with a PC flight simulator to create a full hardware-in-the-loop UAV simulator.
  6. See the output from APM’s serial terminal.

Features :

  1. Straight Needle
  2. Arduino Compatible
  3. Onboard 4 MegaByte Dataflash chip for automatic data logging.
  4. Optional off-board GPS, a uBlox LEA-6H module with Compass.
  5. One of the first open-source autopilot systems to use Invensense's 6 DoF Accelerometer/Gyro MPU-6000.
  6. Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
  7. Atmel's ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.

Package Includes :

1 x APM 2.8 Multicopter Flight Controller.

2 x Connecting Wires.

Quick specs

Item Type
Flight Controller
Power Supply Voltage (V)
LP2985-3.3.
Port
MUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output).
Input Voltage (V)
12~16 VDC
Sensor
3-Axis Gyrometer, Accelerometer, High-performance Barometer
Processor
ATMEGA2560 and ATMEGA32U-2
See all specifications