
1 / 3 · Click to enlarge
AI Summary
A mains-powered PIR switch module that turns a light or exhaust fan on when motion is detected within 180 degrees and up to 8m, then holds it on a 40-second delay. It runs from AC 220V and switches 25-200W loads.
Key Highlights
- 180-degree detection angle covers a wide field from one mounting point
- Detects movement at a distance of up to 8m
- 40-second delay keeps the load on after movement stops
- Switches 25-200W lighting or exhaust fan loads
- Operates on AC 220V at 50Hz or 60Hz supply
- Contactless electronic switching avoids sparks at the switch
Ideal For
- DIY installers adding automatic light control to a corridor
- Electricians fitting hands-free switching for entrance lamps
- Homeowners wanting a fan or light to run only when someone is present
- Makers building motion-triggered mains lighting projects
- Facility managers upgrading stairwell or storage room lighting
Buying Tip
Confirm your light or fan load sits between 25W and 200W and that your supply is AC 220V before wiring, since the module is rated for that range only.
Elecvora expert review
Our verdict
A straightforward mains PIR switch for one light or fan, with a wide 180-degree view and a sensible 40-second hold time. It is best treated as a simple automatic switch for indoor circuits rather than a full security system.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 180-degree detection angle
- Useful 8m detection range
- 40-second delay reduces flicker on and off
- Contactless switching with low standby draw
- Compact, lightweight body
Cons
- Fixed 40-second delay cannot be adjusted
- Load range limited to 25-200W
- Not specified for exposed outdoor use
Best for
Automatic indoor lighting or exhaust fan control on an AC 220V circuit
Not ideal for
Outdoor exposed mounting or loads outside the 25-200W range
Specifications
| Item Type | Sensor |
|---|---|
| Model No. / Name | Motion Sensor Switch |
| Power Supply Voltage (V) | AC 220V (50Hz / 60Hz) |
| Load Type | 25-200W, lights or exhaust fan |
| Delay Time | 40s |
| Detection Distance (mm) | within 8m |
| Detection Angle | 180 degrees |
| Operating Temperature (°C) | -20~+40 centigrade |
| Humidity Range | less than 93%RH |
| Dimensions (L x W x H) mm | 16 * 6.0* 4.5cm |
| Weight (g) | 51g |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 9 × 5 × 3 cm |
What's in the box
- 1 x AC 220V PIR motion sensor switch module
Frequently Asked Questions
What voltage does this module need?
What can I connect to it?
How long does the light stay on?
How far and wide does it detect?
What is included in the package?
Where can it be installed?
Overview
This PIR motion sensor switch module gives automatic, hands-free control to a single mains-powered load. A passive infrared sensor watches a 180-degree field and triggers the switch when a person moves within roughly 8 metres. The connected light or exhaust fan then stays on for a 40-second delay after movement stops, so you are not left in the dark mid-step or with a fan cutting out too early.
The module is powered directly from an AC 220V supply at 50Hz or 60Hz and is rated for loads from 25W to 200W. Switching is electronic rather than mechanical, so there is no contact spark at the switching point and no interference with nearby appliances.
Key Features
- Wide coverage: 180-degree detection angle with a range of up to 8m.
- Delay hold: 40-second on-time after the last detected movement.
- Mains powered: runs from AC 220V, 50Hz or 60Hz.
- Load range: 25W to 200W for lights or an exhaust fan.
- Contactless switching: no electric spark at the switch, low standby draw.
- Compact body: 160 x 60 x 45mm and 51g.
Specifications Explained
Detection angle and distance
The 180-degree angle means the sensor covers a broad sweep in front of it, which suits a wall or ceiling position where people approach from several directions. The 8m detection distance is the outer limit for picking up movement, so plan mounting so that the main walking path falls inside that radius.
Delay time
The 40-second delay is the period the load remains on after the sensor last sees movement. If someone keeps moving inside the detection zone, the load continues to run, which avoids repeated switching on and off.
Load rating
The 25-200W range sets what you can connect. A single lamp, a small group of lamps or an exhaust fan within that window is suitable. Loads outside this range are not covered by the stated rating.
Environment
The module is rated for -20 to +40 degrees Celsius and humidity below 93%RH, so it is intended for indoor or sheltered positions rather than exposed outdoor locations.
Compatibility and Requirements
This module needs an AC 220V supply at 50Hz or 60Hz. It is designed for light or exhaust fan loads between 25W and 200W. No other supply voltages or load types are specified, so check your circuit and load against these figures before wiring.
Typical Uses
- Corridor and stairwell lighting that switches on as people pass.
- Entrance and porch lamps for hands-free light.
- Storage rooms and utility areas where lights are often left on.
- Small exhaust fans that should run only when someone is present.
What's in the Box
One AC 220V PIR motion sensor switch module.
Quick specs
- Item Type
- Sensor
- Model No. / Name
- Motion Sensor Switch
- Power Supply Voltage (V)
- AC 220V (50Hz / 60Hz)
- Load Type
- 25-200W, lights or exhaust fan
- Delay Time
- 40s
- Detection Distance (mm)
- within 8m













