Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Advancer Technology, this ecg emg and heart rate sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; model no. / name EMG Sensor; audio input/output port 3.5 mm jack.

Key Highlights

  • Item Type: Sensor
  • Model No. / Name: EMG Sensor
  • Audio input/output Port: 3.5 mm jack

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeSensor
Model No. / NameEMG Sensor
Audio input/output Port3.5 mm jack
Length (mm)33.5
Width (mm)26
Weight (g)40
Shipping Weight0.043 kg
Shipping Dimensions11 × 8 × 1 cm

Overview

The Advance Technologies EMG Muscle Sensor V3.0 With Cable And Electrodes, made by Advancer Technology, is listed in our ecg emg and heart rate sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sensor
  • Model No. / Name: EMG Sensor
  • Audio input/output Port: 3.5 mm jack (confirm your cable or board uses the same connector)
  • Length (mm): 33.5 (measure your mounting space before ordering)
  • Width (mm): 26 (measure your mounting space before ordering)
  • Weight (g): 40 (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.043 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 11 × 8 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

If you are wandering to make a device that is used to detect measure electrical activity on muscle. then you will need sensors, So, you can buy them at a reasonable price.

The Advance Technologies EMG Muscle Sensor V3.0 With Cable And Electrodes will measure the filtered and rectified electrical activity of a muscle outputting 0-Vs Volts depending on the amount of activity in the selected muscle, where Vs signifies the voltage of the power source. Power supply voltage: min. +-3.5V.

This Muscle Sensor v3 from Advancer Technologies measures, filters, rectifies, and amplifies the electrical activity of a muscle and produces an analog output signal that can easily be read by a microcontroller, enabling novel, muscle-controlled interfaces for your projects.


Getting Started Using Two 9V Batteries

Go through User Manual for details Stepwise description.


Specifications and Features:
  1. The diameter of Electrode Pad: 52 mm
  2. Cable Length: 2 feet
  3. Weight: 30gm.
  4. Improved adjustable gain (more rugged)
  5. Onboard port for our new cables
    1. Connects to the board straight out of the box
  6. The reduced voltage needed (+-3.5V)

Wiring Instructions:
  1. To use this sensor, the user must have three electrodes connected to the subject's body.
  2. The reference electrode should be placed on an inactive section of the body, such as the bony portion of the elbow, shin, or forearm. This electrode should be connected to the black or brown cable.
  3. The two other electrodes should be placed along the muscle selected to be measured. The second electrode should be placed along the mid-length of the muscle; this electrode should be connected to the red cable.
  4. The last electrode should be placed at the end of the muscle and connected to the blue cable.
  5. Finally, connect pin SIG to an analog input pin of your microcontroller and the GND pin to the ground pin on your microcontroller.
 

WARNING: As an inherent risk associated with electrical component work, improper use of this sensor could cause harm to the subject. If underage, do not use without adult supervision.

WARNING: This sensor is not intended for use in the diagnosis of a disease or other conditions, or in the cure, mitigation treatment, or prevention of disease, in a man or other animals.


Useful Links:

Package Includes:

1 x EMG Muscle Sensor V3.0 Module.

3 x Electrode Pad.

1 x Connecting Cable.

Quick specs

Item Type
Sensor
Model No. / Name
EMG Sensor
Audio input/output Port
3.5 mm jack
Length (mm)
33.5
Width (mm)
26
Weight (g)
40
See all specifications