
1 / 4 · Click to enlarge
At a glance
Made by Ai-Thinker, this ai-thinker dev. boards & modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Other IoT Boards; model no. / name CA-01 Dev. Board; frequency band LTE-TDD: B34/B38/B39/B40/B41; LTE-FDD: B1/B3/B5/B8. Check that your power source supplies 3.3 to 4.3 before connecting it.
Key Highlights
- Item Type: Other IoT Boards
- Model No. / Name: CA-01 Dev. Board
- Frequency Band: LTE-TDD: B34/B38/B39/B40/B41; LTE-FDD: B1/B3/B5/B8
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Other IoT Boards |
|---|---|
| Model No. / Name | CA-01 Dev. Board |
| Frequency Band | LTE-TDD: B34/B38/B39/B40/B41; LTE-FDD: B1/B3/B5/B8 |
| Supported | VoLTE; Support Camera; Support analog voice |
| Operating Temperature (°C) | -40℃~+85℃ |
| Supply Voltage | 3.3 to 4.3 |
| Power Consumption (W) | 20uA@shutdown, 3mA@sleep, typical value |
| Data LTE-TDD | uplink and downlink ratio 2 [Max. 8Mbps(DL)/Max. 2Mbps(UL)]; uplink and downlink ratio 1[Max. 6Mbps(DL)/Max. 4Mbps(UL)] |
| Data: LTE-FDD | Max. 10Mbps (DL)/ Max. 5Mbps (UL) |
| Shipping Weight | 0.067 kg |
| Shipping Dimensions | 19 × 15 × 2 cm |
Overview
The Ai-Thinker CA-01 Dev. Board, made by Ai-Thinker, is listed in our ai-thinker dev. boards & modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Other IoT Boards
- Model No. / Name: CA-01 Dev. Board
- Frequency Band: LTE-TDD: B34/B38/B39/B40/B41; LTE-FDD: B1/B3/B5/B8 (make sure the rest of your system works at this frequency)
- Supported: VoLTE; Support Camera; Support analog voice (resolution is one factor; lens and lighting matter as much)
- Operating Temperature (°C): -40℃~+85℃
- Supply Voltage: 3.3 to 4.3 (match this to your power supply; too high a voltage can damage the part)
- Power Consumption (W): 20uA@shutdown, 3mA@sleep, typical value
- Data LTE-TDD: uplink and downlink ratio 2 [Max. 8Mbps(DL)/Max. 2Mbps(UL)]; uplink and downlink ratio 1[Max. 6Mbps(DL)/Max. 4Mbps(UL)]
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Support Cat.1
- Support VoLTE
- Support 1.4 ~ 20MHz RF bandwidth
- LTE-TDD: uplink and downlink configuration 2
- Maximum upstream rate 2Mbps, maximum downstream rate 8Mbps
- LTE-TDD: uplink and downlink configuration 1
- Maximum upstream rate 4Mbps, maximum downstream rate 6Mbps
- Network protocol features
- Support: TCP/UDP/PPP/FTP/HTTP/NITZCMUXINDIS/NTP/ HTTPS/
- In development: SMTP/SMTPS/MMS/DTMF
- USIM card interface
- Support USIM / SIM card: 1.8V and 3V
- USB interface
- Compatible with USB2.0 (only supports slave mode), the data transfer rate is up to 480Mbps
- Used for AT commands, data transmission, software debugging, software upgrade
- USB virtual serial port driver: support USB driver under Windows 7 / 8.1 / 10, Linux 2.6.x / 3.x / 4.1, Android 4.x / 5.x /6.x17.x and other operating systems
- Serial port
Interface:
-
1 USB 2.0 high speed interface (up to 480Mbps)
-
1.8V/3.0V (U) SIM card interface
-
1 NETLIGHT interface (NET_STATUS and NET_MODE)
-
2 analog voice input
-
2 analog voice output
-
3 UART interfaces
-
1 SPI interface
-
1 SPI LCD interface
-
1 SPI Camera interface
-
1 MMC interface
-
PWRKEY (active low)
-
Support 6*6 array keyboard
-
2 ADC interfaces
-
Electrical parameters-Output power: LTE-TDD: Class3(23dBm+1/-3dB); LTE-FDD: Class3(23dBm+-2dB);
-
General features: 3GPP E-UTRA Release 13;
-
Bandwidth: 1.4/3/5/10/15/20MHz;
-
Package: stamp hole + LGA;
-
Weight: about 2.6g;
Package Includes: 1 x Ai-Thinker CA-01 Dev. Board
Quick specs
- Item Type
- Other IoT Boards
- Model No. / Name
- CA-01 Dev. Board
- Frequency Band
- LTE-TDD: B34/B38/B39/B40/B41; LTE-FDD: B1/B3/B5/B8
- Supported
- VoLTE; Support Camera; Support analog voice
- Operating Temperature (°C)
- -40℃~+85℃
- Supply Voltage
- 3.3 to 4.3


















