
1 / 4 · Click to enlarge
AI Summary
A compact 3.3V GPS receiver module supporting BDS, GPS and GLONASS for drones and microcontroller projects. Its low 0.025A current draw and 25 x 17mm PCB make it easy to fit into space- and power-limited builds.
Key Highlights
- Multi-mode GNSS support for BDS, GPS and GLONASS positioning
- Compact 25 x 17mm PCB weighing approximately 2g
- Low 3.3V operation with a rated current of 0.025A
- Integrated RF front-end, digital baseband and 32-bit RISC processor
- Active antenna detection and protection built in
- Compatible with microcontrollers for custom navigation projects
Ideal For
- Drone builders adding a lightweight GNSS receiver
- FPV pilots building compact GPS-equipped craft
- Microcontroller hobbyists working on navigation projects
- Robotics developers needing position awareness
- Makers building portable position-logging devices
Buying Tip
Confirm your host board can supply a stable 3.3V rail and plan for an active antenna, since the module is designed for low-voltage microcontroller integration.
Elecvora expert review
Our verdict
The GP-02 packs multi-constellation GNSS support, integrated processing and low power draw into a very small board. It is a sensible choice for compact drone and microcontroller builds where weight and current budget are tight.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Supports BDS, GPS and GLONASS
- Very small 25 x 17mm footprint at about 2g
- Low 0.025A rated current
- Integrated RF, baseband and 32-bit RISC processing
- Active antenna detection and protection included
Cons
- Requires a stable 3.3V supply
- Antenna not included in the box
- Wiring and configuration needed for integration
Best for
Compact drone, FPV and microcontroller projects needing low-power GNSS positioning
Not ideal for
Users wanting a plug-and-play receiver with antenna and cables included
Specifications
| Item Type | GPS Receiver Module |
|---|---|
| Model No. / Name | GP-02 |
| Voltage Rating (V) | 3.3 |
| Rated Current (A) | 0.025 |
| Material | PCB |
| Compatibility | Compatible with microcontrollers |
| Length (mm) | 25 |
| Width (mm) | 17 |
| Weight (g) | 02 |
| Shipping Weight | 0.002 kg |
| Shipping Dimensions | 9 × 7 × 2 cm |
What's in the box
- 1 x Ai-Thinker GP-02 GPS Receiver Module
Frequently Asked Questions
Which satellite systems does the GP-02 support?
What voltage does the module need?
Is it compatible with microcontrollers?
Does it support an active antenna?
What is included with the module?
How should I care for the module?
Overview
The Ai-Thinker GP-02 is a compact GNSS receiver module designed for projects that need multi-system satellite positioning in a small footprint. It supports BDS, GPS and GLONASS, so the receiver can draw on several constellations rather than relying on a single system. Inside the module, an RF front-end, digital baseband processor and 32-bit RISC CPU work together, with power management handling the low-current operation.
At just 25mm long, 17mm wide and around 2g, the GP-02 is easy to integrate into drones, FPV builds, robotics and custom electronics where space and weight matter.
Key Features
- Multi-mode GNSS: BDS, GPS and GLONASS support for flexible positioning.
- Integrated architecture: RF front-end, digital baseband and 32-bit RISC processor on one PCB.
- Low power: 3.3V rating with a typical rated current of 0.025A.
- Antenna protection: Active antenna detection and protection circuitry included.
- Compact and light: 25 x 17mm board weighing about 2g.
Specifications Explained
The 3.3V voltage rating means the module is intended for logic-level supplies common in microcontroller and drone electronics. Its 0.025A rated current keeps the load small, which matters on battery-powered craft where every milliamp counts.
The 25 x 17mm dimensions and 2g weight make the board straightforward to mount in tight frames or enclosures. The PCB construction and integrated processing mean fewer external parts are needed to get a positioning solution running.
Compatibility and Requirements
The GP-02 is described as compatible with microcontrollers, making it suitable for custom builds where position data is read by a host board. It requires a 3.3V supply. An active antenna can be connected, and the module includes detection and protection for it. Check your host board's input voltage and antenna arrangement before wiring.
Typical Uses
This module suits drone and FPV builds that need a lightweight GNSS source, robotics projects requiring position awareness, and microcontroller experiments involving satellite navigation. Its low current draw and small size also make it useful in portable data-logging devices.
What's in the Box
One Ai-Thinker GP-02 GPS receiver module is included.
Quick specs
- Item Type
- GPS Receiver Module
- Model No. / Name
- GP-02
- Voltage Rating (V)
- 3.3
- Rated Current (A)
- 0.025
- Material
- PCB
- Compatibility
- Compatible with microcontrollers



















