Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Ai-Thinker, this ai-thinker dev. boards & modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Wi-Fi Modules and Development Boards; case/package DIP-18; antenna type PCB. Check that your power source supplies 3.0 to 3.6 before connecting it.

Key Highlights

  • Item Type: Wi-Fi Modules and Development Boards
  • Case/Package: DIP-18
  • Antenna Type: PCB

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeWi-Fi Modules and Development Boards
Operating Frequency (MHz)2412 to 2484
Case/PackageDIP-18
Antenna TypePCB
Transmit Power (dBm)802.11g: 14±2 dBm (@54Mbps), 802.11n: 13±2 dBm (@HT20, MCS7), 802.11b: 16±2 dBm (@11Mbps)
Receiving SensitivityCCK, 1 Mbps : -90dBm, CCK, 11 Mbps: -85dBm, 6 Mbps (1/2 BPSK): -88dBm, 54 Mbps (3/4 64-QAM): -70dBm, HT20, MCS7 (65 Mbps, 72.2 Mbps): -67dBm
UART Baud RateSupport 300 ~ 4608000 bps ˈDefault 115200 bps
IO Port11
SecurityWEP/WPA-PSK/WPA2-PSK
Environmental Temperature (°C)-40 ć ~ 90 ć , < 90%RH
InterfaceUART/GPIO/PWM/ADC
Operating Temperature (°C)-20 ć ~ 85 ć
SPI Flashbuilt-in 1MByte
Supply Voltage3.0 to 3.6
Length (mm)18
Width (mm)18
Weight (g)3
Shipping Weight0.008 kg
Shipping Dimensions9 × 6 × 1 cm

Overview

The Ai Thinker ESP-01M WiFi Module, made by Ai-Thinker, is listed in our ai-thinker dev. boards & modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Wi-Fi Modules and Development Boards (2.4 GHz reaches further, 5 GHz is faster at short range)
  • Operating Frequency (MHz): 2412 to 2484 (make sure the rest of your system works at this frequency)
  • Case/Package: DIP-18
  • Antenna Type: PCB
  • Transmit Power (dBm): 802.11g: 14±2 dBm (@54Mbps), 802.11n: 13±2 dBm (@HT20, MCS7), 802.11b: 16±2 dBm (@11Mbps)
  • Receiving Sensitivity: CCK, 1 Mbps : -90dBm, CCK, 11 Mbps: -85dBm, 6 Mbps (1/2 BPSK): -88dBm, 54 Mbps (3/4 64-QAM): -70dBm, HT20, MCS7 (65 Mbps, 72.2 Mbps): -67dBm
  • UART Baud Rate: Support 300 ~ 4608000 bps ˈDefault 115200 bps (confirm your cable or board uses the same connector)
  • IO Port: 11 (confirm your cable or board uses the same connector)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Ai Thinker ESP-01M WiFi Module can be widely used on various occasions for networking, home automation, industrial wireless control, baby monitors, wearable electronics, infinite position sensing device, wireless positioning systems, signals, and other networking applications, networking applications is the ideal solution.
Ai Thinker ESP-01M WiFi Module uses the DIP plug-in package, the unique design so that it can be flexible docking to existing products, especially suitable for automation, large-scale, modern production of low cost, convenient application in various networking hardware terminal applications.

Features:

  1. The smallest 802.11b/g/n Wi-Fi SoC module
  2. Uses low power 32bit CPU and compatible with an application processor
  3. Main frequency up to 160MHz
  4. Built-in 10Bit high precision ADC
  5. Support UART/GPIO/PWM/ADC interface
  6. Integrate Wi-Fi MAC/BB/RF/PA/LNA
  7. Support multiple sleep modes
  8. Standby power consumption as low as 1.0mW
  9. Embedded Lwip protocol stack
  10. Support STA/AP/STA+AP work model
  11. Support Smart Config/AirKiss
  12. Series Rate up to 4Mbps
  13. Universal AT instruction
  14. Support serial local upgrade and remote firmware upgrade
  15. Small size 18*18*2.8mm

Package includes:

1 x Ai Thinker ESP-01M WiFi Module

Quick specs

Item Type
Wi-Fi Modules and Development Boards
Operating Frequency (MHz)
2412 to 2484
Case/Package
DIP-18
Antenna Type
PCB
Transmit Power (dBm)
802.11g: 14±2 dBm (@54Mbps), 802.11n: 13±2 dBm (@HT20, MCS7), 802.11b: 16±2 dBm (@11Mbps)
Receiving Sensitivity
CCK, 1 Mbps : -90dBm, CCK, 11 Mbps: -85dBm, 6 Mbps (1/2 BPSK): -88dBm, 54 Mbps (3/4 64-QAM): -70dBm, HT20, MCS7 (65 Mbps, 72.2 Mbps): -67dBm
See all specifications