Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Ai-Thinker, this ai-thinker dev. boards & modules is a good fit for makers, students and electronics hobbyists. Main specs: item type NF Wireless Module; model no. / name NF-01-N; package DIP-8. Check that your power source supplies 1.9~3.6V, Typical 3.3V before connecting it.

Key Highlights

  • Wireless connection
  • Item Type: NF Wireless Module
  • Model No. / Name: NF-01-N
  • Package: DIP-8

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeNF Wireless Module
Operating Frequency (MHz)2400 to 2525
Model No. / NameNF-01-N
PackageDIP-8
Power Supply Voltage (V)1.9~3.6V, Typical 3.3V
Modulation MethodGFSK/FSK
Data Transfer Rate2Mbps/1Mbps/250Kbps
Supply Voltage1.9 to 3.6
Additional Specs.Avg. emission current: as low as 110mA
Receive sensitivity-96dBm@250kbps
Max Transmit Power7dBm
Width (mm)29
Length (mm)11
Height (mm)11
Weight (g)3
Shipping Weight0.005 kg
Shipping Dimensions8 × 5 × 1 cm

Overview

The Ai Thinker NF-01-N Wireless Transceiver Module, made by Ai-Thinker, is listed in our ai-thinker dev. boards & modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: NF Wireless Module
  • Operating Frequency (MHz): 2400 to 2525 (make sure the rest of your system works at this frequency)
  • Model No. / Name: NF-01-N
  • Power Supply Voltage (V): 1.9~3.6V, Typical 3.3V (match this to your power supply; too high a voltage can damage the part)
  • Modulation Method: GFSK/FSK
  • Data Transfer Rate: 2Mbps/1Mbps/250Kbps
  • Supply Voltage: 1.9 to 3.6 (match this to your power supply; too high a voltage can damage the part)
  • Additional Specs.: Avg. emission current: as low as 110mA (your supply must deliver at least this much current)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Ai Thinker NF-01-N Wireless Transceiver is a 100mW power 2.4G wireless module with high airspeed (up to 2Mbps), SPI interface, a pure hardware module for transceiver and it has high stability, high cost performance, good spectrum test characteristics, small Volume, using all industrial grade components.

NF-01-N can be widely used in various Internet of Things applications, suitable for wireless mouse and keyboard, wireless remote control, somatosensory equipment, active RFID, NFC, low-power self-organizing network wireless sensor network nodes, etc.

The NF-01-N is packaged in DIP-8. It can be quickly connected to existing products, whether it is for learning or mass production. It can be directly inserted and removed without welding. It is very convenient to use.

Features:

  1. DIP-8 ultra-small package
  2. built-in 2.4G antenna, compact size, easy to use
  3. Supports six channels of data reception
  4. Supports general modulation methods such as GFSK/FSK
  5. Supports 2Mbps/1Mbps/250Kbps data rate
  6. Multi-frequency point: 126 frequency points to meet the needs of multi-point communication and frequency hopping communication
  7. Internally integrated high PSRR LDO
  8. Wide supply voltage range: 1.9~3.6V
  9. Average emission current as low as 110mA
  10. Receive sensitivity: -96dBm@250kbps
  11. Maximum transmit power: 7dBm
  12. 4-wire SPI interface with speeds up to 10MHz
  13. Internally integrated intelligent ARQ baseband protocol engine
  14. Transceiver data hardware interrupt output
  15. Support 1bit RSSI output

Package includes:

1 x Ai Thinker NF-01-N Wireless Transceiver Module

Quick specs

Item Type
NF Wireless Module
Operating Frequency (MHz)
2400 to 2525
Model No. / Name
NF-01-N
Power Supply Voltage (V)
1.9~3.6V, Typical 3.3V
Modulation Method
GFSK/FSK
Data Transfer Rate
2Mbps/1Mbps/250Kbps
See all specifications