
1 / 3 · Click to enlarge
At a glance
Made by Ai-Thinker, this ai-thinker dev. boards & modules is a good fit for makers, students and electronics hobbyists. Main specs: item type NF Wireless Module; model no. / name NF-01-S; main chip Si24r1. Check that your power source supplies 1.9~3.6V, Typical 3.3V before connecting it.
Key Highlights
- Wireless connection
- Item Type: NF Wireless Module
- Model No. / Name: NF-01-S
- Main Chip: Si24r1
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | NF Wireless Module |
|---|---|
| Operating Frequency (MHz) | 2400 to 2525 |
| Model No. / Name | NF-01-S |
| Main Chip | Si24r1 |
| Package | DIP-8 |
| Max Transmit Power | 7±1 dBm |
| Power Supply Voltage (V) | 1.9~3.6V, Typical 3.3V |
| Antenna Type | Onboard PCB antenna, gain 2dBi |
| Receiving Sensitivity | -96dBm@250kbps |
| Communication Mode | SPI (The maximum rate of up to 10Mbps) |
| Operating Temperature (°C) | -20 ℃ ~ 85 ℃ |
| Avg. Current Consumption | Emission current: 25mA(7dBm) Receive current: 15mA (2Mbps) Shutdown: current 1.0uA(Shutdown Mode) |
| Length (mm) | 28.6 |
| Width (mm) | 15.3 |
| Height (mm) | 3.2 mm |
| Weight (g) | 3 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 8 × 5 × 1 cm |
Overview
The Ai Thinker NF-01-S Wireless Transceiver Module, made by Ai-Thinker, is listed in our ai-thinker dev. boards & modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: NF Wireless Module
- Operating Frequency (MHz): 2400 to 2525 (make sure the rest of your system works at this frequency)
- Model No. / Name: NF-01-S
- Main Chip: Si24r1
- Max Transmit Power: 7±1 dBm
- Power Supply Voltage (V): 1.9~3.6V, Typical 3.3V (match this to your power supply; too high a voltage can damage the part)
- Antenna Type: Onboard PCB antenna, gain 2dBi
- Receiving Sensitivity: -96dBm@250kbps
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- DIP-8 ultra-small package, built-in 2.4G antenna, small size, easy to use
- Supports data reception for six channels
- Supports common modulation such as GFSK / FSK
- Supports 2Mbps / 1Mbps / 250Kbps data rate
- Multi-frequency: 126 frequency, to meet the needs of multi-point communication and frequency hopping communication
- Internal integration of high PSRR LDOs
- Wide supply voltage range: 1.9 ~ 3.6V
- Average emission current as low as 110mA
- Receiver sensitivity: -96dBm @ 250kbps
- Maximum transmit power: + 7dBm
- Four-wire SPI interface for up to 10MHz
- Internal Integrated Smart ARQ Baseband Protocol Engine
- Transmit data hardware interrupt output
- Supports 1bit RSSI output
Package includes:
1 x Ai Thinker NF-01-S Wireless Transceiver ModuleQuick specs
- Item Type
- NF Wireless Module
- Operating Frequency (MHz)
- 2400 to 2525
- Model No. / Name
- NF-01-S
- Main Chip
- Si24r1
- Max Transmit Power
- 7±1 dBm
- Power Supply Voltage (V)
- 1.9~3.6V, Typical 3.3V


















