
1 / 6 · Click to enlarge
AI Summary
A plug-in tracer buzzer that sounds an 85dB alarm when your RC transmitter signal is lost. It connects between the receiver and a servo channel, helping you find lost aircraft quickly.
Key Highlights
- Emits 85dB alarm on loss of TX signal
- Simple inline connection between servo and receiver
- Wide 4–6V operating range suits most receivers
- Ultra-light 4.5g adds minimal weight
- Slim 140mm length fits tight installations
- Also warns if RX is left powered in the pits
Ideal For
- RC plane and glider pilots flying in grassy fields
- Multirotor pilots who fly in areas with dense vegetation
- Helicopter pilots wanting a lost-model alarm
- Parkflyer enthusiasts needing a lightweight safety aid
- Club pilots who often forget to power down receivers
Buying Tip
Check that your receiver’s servo channel provides 4–6V and confirm the connector polarity before plugging in the alarm.
Elecvora expert review
Our verdict
A straightforward, low-cost solution for locating lost RC models, though the five-minute delay and manual disconnection may not suit every pilot.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very easy to install with no soldering
- Loud 85dB alarm is easy to hear
- Lightweight and slim design
- Works with a wide range of receivers
Cons
- Five-minute delay before alarm sounds
- Must be manually disconnected to power off
- No volume adjustment or custom delay
Best for
Pilots who fly in areas with tall grass or dense vegetation and want a simple lost-model alarm.
Not ideal for
Pilots who need instant alerting or programmable delay settings.
Specifications
| Color | Green |
|---|---|
| Voltage Rating (V) | 4 to 6 |
| Continuous Discharge Current (A) | 1-35 mA |
| Length (mm) | 140 |
| Width (mm) | 9 |
| Weight (g) | 4.5 |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 4 × 3 × 2 cm |
What's in the box
- 1 x Alarm Finder Tracer Buzzer for RC Lost Aircraft
Frequently Asked Questions
How does the alarm detect a lost signal?
Will it work with my receiver?
What voltage does it require?
How do I turn it off?
What is included in the package?
Can I use it with a multirotor?
Overview
The Alarm Finder Tracer Buzzer is a simple, effective safety accessory for RC pilots. It plugs inline between your receiver and a servo channel and monitors the transmitter signal. If the signal is lost, it emits a loud 85dB alarm after a short delay, giving you a much better chance of locating a downed model in long grass or rough terrain. It also acts as a handy reminder if you leave your receiver powered on in the pits.
Key Features
- Signal-loss alarm: Sounds when the TX signal is lost, helping you find lost aircraft.
- Plug-and-play: Connects between servo and receiver like an extension cord.
- Loud 85dB output: Audible over engine noise and wind.
- Wide voltage range: Operates from 4 to 6V, suitable for most receivers.
- Low current draw: 1–35mA continuous discharge.
- Lightweight: Just 4.5g, with a slim 140mm profile.
Specifications Explained
Voltage Rating (4–6V): This range covers the typical output of most RC receivers, so the alarm can be powered directly from the receiver without additional regulation.
Continuous Discharge Current (1–35mA): The low current draw means the alarm won’t noticeably drain your flight battery, even if left connected.
Dimensions (140mm × 9mm): The long, thin shape allows the buzzer to be routed through tight fuselage spaces or along frame arms.
Weight (4.5g): Negligible for most models, including small parkflyers and multirotors.
Compatibility and Requirements
The Alarm Finder Tracer Buzzer works with any RC receiver that provides a servo channel and a 4–6V supply. It is compatible with planes, helicopters, gliders, and multirotors. No programming or soldering is required—simply plug it in between your servo and receiver. Always observe correct polarity before powering on.
Typical Uses
- Locating a model that has gone down in tall grass or brush.
- Finding a multirotor after a crash or loss of control.
- Reminding you to power off your receiver in the pits.
- Adding a safety alert to parkflyers, gliders, and helicopters.
What's in the Box
1 × Alarm Finder Tracer Buzzer for RC Lost Aircraft.
Quick specs
- Color
- Green
- Voltage Rating (V)
- 4 to 6
- Continuous Discharge Current (A)
- 1-35 mA
- Length (mm)
- 140
- Width (mm)
- 9
- Weight (g)
- 4.5













