Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This 58cm cable has alligator clips on one end and a USB male connector on the other, letting you tap USB power for quick tests. Color-coded red and black clips help you keep polarity correct.

Key Highlights

  • USB male connector on one end, alligator clips on the other
  • 58cm wire length for flexible positioning
  • Red and black color-coded insulation for polarity identification
  • Insulated clip covers for safe handling
  • Lightweight and compact for easy storage
  • Suitable for quick circuit testing and DIY projects

Ideal For

  • Electronics students and hobbyists
  • DIY enthusiasts and makers
  • Technicians doing quick tests
  • Physics lab instructors
  • Anyone needing temporary USB power connections

Buying Tip

Check that your USB power source matches the voltage and current requirements of your circuit, as this cable only provides a physical connection.

Elecvora expert review

Our verdict

A straightforward, no-frills adapter that does exactly what it promises. It is ideal for quick tests and temporary setups where you need to tap USB power without soldering.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Simple plug-and-clip design
  • Color-coded for easy polarity identification
  • Insulated clips for safer handling
  • Lightweight and portable

Cons

  • Requires a separate USB power source
  • Not designed for high-current applications
  • Clips may not grip very fine wires securely

Best for

Quick circuit testing and educational demonstrations

Not ideal for

Permanent installations or high-power devices

Specifications

InterfaceUSB Male
Wire Length(mm)580
ColorRed and Black
Shipping Weight0.01 kg
Shipping Dimensions8 × 6 × 1 cm

What's in the box

  • 1 x Alligator Test Clips to USB Male Connector Power Supply Adapter Cable, 58cm, Red and Black

Frequently Asked Questions

Can I use this cable to power a device that needs 5V?
Yes, if you connect the USB end to a standard 5V USB source, the clips will provide that voltage to your circuit. However, always check that your device's current draw is within the capability of your USB power source.
What is the maximum wire size the alligator clips can hold?
The clips are designed for typical component leads and wires; they can grip wires up to approximately 18-20 AWG, but the exact jaw opening is not specified. For very thin wires, you may need to double the wire over.
Does this cable come with a USB power adapter?
No, the package includes only the adapter cable with alligator clips and USB male connector. You must provide your own USB power source.
Is the cable safe to use for experiments?
The clips have insulated covers, but the cable is not fused or protected against short circuits. Always exercise caution and avoid touching exposed conductors when powered.
Can I use this for data transfer as well as power?
The cable is intended for power supply connections; it does not have data lines wired to the clips, so it cannot be used for USB data communication.
How should I store the cable?
Keep it coiled loosely in a dry place, away from sharp edges that could nick the insulation. Avoid pulling on the wire to disconnect the clips.

Overview

The Alligator Test Clips to USB Male Connector Power Supply Adapter Cable is a simple but practical tool for anyone working with electronics. One end terminates in a standard USB male plug, while the other splits into two alligator clips with red and black insulation. The 58cm cable gives you enough length to reach between a USB port and your test points without excess clutter. This cable is not a precision instrument; it is a handy accessory for quick, temporary connections where soldering would be overkill or impossible.

Key Features

  • Dual-ended design: USB male connector and two alligator clips for direct interfacing.
  • Color-coded leads: Red and black insulation helps you identify positive and negative lines at a glance.
  • Insulated clip covers: The soft plastic covers on the clips reduce the chance of accidental contact with adjacent conductors.
  • 58cm wire length: Provides flexibility when positioning your test setup.
  • Lightweight construction: Easy to carry and store in a toolbox or drawer.

Specifications Explained

Interface: The USB male connector plugs into any standard USB Type-A port, such as those on power banks, chargers, or computers. The alligator clips then attach to wires, terminals, or component leads.

Wire length: At 580mm (58cm), the cable offers a comfortable reach for bench work without being unnecessarily long. This length is well suited for small projects where you need to connect a USB power source to a circuit on a desk.

Color: The red and black color coding is a standard convention in electronics: red typically indicates the positive supply, black the negative or ground. This helps prevent wiring mistakes.

Compatibility and Requirements

This cable is compatible with any device or circuit that accepts a USB Type-A male connection for power or signal. It does not include a USB power source; you will need a USB port, charger, or power bank to use it. The alligator clips can grip bare wires, screw terminals, battery tabs, and component leads up to a size that fits within the jaw opening. No additional tools are required for connection, though you may need a USB power source.

Typical Uses

  • Quickly powering small circuits from a USB port during prototyping.
  • Testing components or sensors without soldering.
  • Educational demonstrations in physics or electronics labs.
  • Temporarily connecting wires to a USB power bank for field tests.
  • Holding small parts together during soldering as miniature clamps.

What's in the Box

1 x Alligator Test Clips to USB Male Connector Power Supply Adapter Cable, 58cm, Red and Black.

Quick specs

Interface
USB Male
Wire Length(mm)
580
Color
Red and Black
Shipping Weight
0.01 kg
Shipping Dimensions
8 × 6 × 1 cm
See all specifications