Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 40x40mm aluminium heat sink designed for MK7 and MK8 extruders, with a 31mm mounting hole PCD and black oxide finish. It helps dissipate heat from the extruder to reduce heat creep and keep prints consistent.

Key Highlights

  • Fits MK7 and MK8 extruder assemblies
  • Aluminium construction for efficient heat transfer
  • Black oxide surface treatment for durability
  • 40mm x 40mm footprint with 31mm mounting hole PCD
  • Lightweight at only 20 grams
  • Finned design increases heat dissipation area

Ideal For

  • 3D printer owners maintaining MK7 or MK8 extruders
  • Makers building or upgrading custom 3D printers
  • Users experiencing heat creep on older extruder setups
  • Technicians servicing desktop 3D printers
  • Hobbyists looking for a lightweight cooling upgrade

Buying Tip

Before ordering, measure the distance between the mounting holes on your extruder to confirm the 31mm PCD matches your hardware.

Elecvora expert review

Our verdict

A simple, well-made heat sink that does exactly what it should for MK7 and MK8 extruders. It is an affordable fix for heat-related issues, provided the mounting pattern matches your hardware.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Lightweight aluminium construction
  • Easy to install with standard tools
  • Black oxide finish resists wear
  • Compact 40mm square footprint

Cons

  • Mounting screws not included
  • Only fits MK7 and MK8 extruders
  • No thermal compound supplied

Best for

Printers with MK7 or MK8 extruders needing a replacement or extra cooling.

Not ideal for

Extruders with non-standard mounting hole spacing or other models.

Specifications

Item TypeHeatsink
CompatibilityMK7 Extruder, MK8 Extruder
MaterialAluminium
ColorBlack
Mounting Hole PCD (mm)31
Length (mm)40
Width (mm)40
Weight (g)20
Shipping Weight0.022 kg
Shipping Dimensions7 × 4 × 2 cm

What's in the box

  • 1 x Aluminium Heat Sink

Frequently Asked Questions

Will this heat sink fit my MK8 extruder?
Yes, it is designed for MK8 extruders. However, always check that your extruder's mounting holes are on a 31mm pitch circle diameter to be sure.
Does it come with screws?
No, mounting screws are not included. You will need to reuse the screws from your existing heat sink or obtain suitable ones separately.
What material is the heat sink made of?
It is made of aluminium with a black oxide surface treatment.
How much does the heat sink weigh?
The heat sink weighs approximately 20 grams.
Can I use this on other extruder models?
It is only intended for MK7 and MK8 extruders. Other models may have different mounting dimensions and may not fit.
Do I need thermal paste?
Thermal paste is not included, but using a thin layer between the heat sink and the extruder can improve heat transfer.

Overview

The A Type Aluminium Heat Sink is a replacement cooling component for MK7 and MK8 extruders used in many desktop 3D printers. Its purpose is to draw heat away from the extruder motor and cold end, helping to maintain stable filament flow and reduce the risk of heat creep during long prints. The heat sink is machined from aluminium and finished with a black oxide coating, which offers a clean appearance and a degree of surface hardness. With a 40mm by 40mm profile and a 31mm mounting hole PCD, it is intended to drop onto compatible extruder mounts without modification.

Key Features

  • Aluminium body: Aluminium conducts heat quickly, so the heat sink can start dissipating warmth as soon as the extruder heats up.
  • Finned structure: The closely spaced fins create a larger surface area for air to pass over, improving passive cooling.
  • Black oxide finish: The surface treatment adds hardness and gives the part a neat, dark look that suits most printer builds.
  • Lightweight: At only 20 grams, it adds very little weight to the print head, which is important for fast movements.

Specifications Explained

Compatibility: This heat sink is intended for MK7 and MK8 extruders. Check your extruder model before ordering, as other extruder types may use different mounting patterns.

Dimensions and mounting: The 40mm length and 40mm width give a compact square footprint. The 31mm mounting hole PCD (pitch circle diameter) means the centres of the mounting holes are 31mm apart on a circle, which matches the screw spacing on compatible extruder bodies. This is the critical measurement to verify against your existing hardware.

Weight: At 20 grams, the heat sink is light enough not to affect print head dynamics noticeably, yet substantial enough to provide useful thermal mass.

Compatibility and Requirements

This heat sink is designed specifically for MK7 and MK8 extruders. It does not include mounting screws or other hardware, so you will need to reuse the fasteners from your existing setup or source suitable screws separately. No other compatibility information is provided; if your extruder is not an MK7 or MK8, this part may not fit.

Typical Uses

This component is typically used when building, repairing or upgrading a 3D printer that uses an MK7 or MK8 extruder. It can replace a damaged or missing heat sink, or be added to a custom build where extra cooling is desired. It is also useful for maintenance tasks where the original heat sink has become worn or inefficient.

What's in the Box

1 x Aluminium Heat Sink. Mounting screws are not included.

Quick specs

Item Type
Heatsink
Compatibility
MK7 Extruder, MK8 Extruder
Material
Aluminium
Color
Black
Mounting Hole PCD (mm)
31
Length (mm)
40
See all specifications