
1 / 4 · Click to enlarge
AI Summary
Original Amass XT90 male connector with a molded nylon housing and 4.5mm brass contacts, rated for 90A continuous current. The solid, low-resistance fit keeps high-amp drone and RC power systems supplied without voltage-starving plug losses.
Key Highlights
- Original Amass XT90 male connector with molded housing
- Rated for 90A continuous current
- 4.5mm brass contacts with gold plating
- High-temperature nylon housing protects against shorting
- Semicircular solder terminals for easy wire installation
- Compact 6g connector with two contact positions
Ideal For
- FPV pilots building or repairing high-amp drone power leads
- RC car and boat hobbyists using XT90 battery packs
- Makers building high-current DC power harnesses
- Anyone replacing a worn or damaged XT90 male plug
Buying Tip
Check that your battery or device uses a female XT90 connector before ordering, since this listing is for the male half only.
Elecvora expert review
Our verdict
A genuine Amass XT90 male plug that delivers the solid, low-resistance connection high-amp builds need. The molded housing and 4.5mm contacts make it a dependable choice for drone and RC power leads.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Original Amass quality with molded nylon housing
- 90A continuous current rating
- Gold-plated brass contacts for low resistance
- Easy to solder with semicircular terminals
- Lightweight at just 6g
Cons
- Soldering is required to install
- Only one male connector is included; female half not supplied
- Wire and heat-shrink are not included
Best for
High-current drone and RC battery connections
Not ideal for
Low-power electronics or plug-and-play setups without soldering
Specifications
| Item Type | Battery Connector |
|---|---|
| Model Series | XT90 |
| Metal Connector Size (mm) | 4,5mm |
| Metal Material | Brass |
| Wire Insulation Material | Nylon |
| Rated current (mA) | 90 A |
| Additional Specs. | Contact Positions: 2 |
| Gender | Male |
| Weight (g) | 6 |
| Color | Yellow |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 8 × 4 × 3 cm |
What's in the box
- 1 x Amass XT90 Male Connector with Housing
Frequently Asked Questions
Is this a male or female XT90 connector?
What current can this connector handle?
What wire size fits the solder terminals?
Does it come with wires or a housing?
How do I install the connector?
Is the housing heat-resistant?
Overview
The Amass XT90 Male Connector with Housing is a genuine high-current plug for drone, RC and other battery-powered builds. Amass molds the nylon housing directly around the gold-plated brass spring contacts, which keeps the two halves aligned and makes plugging and unplugging smooth and secure. The result is a tight, low-resistance connection that lets more power travel from your battery pack to your power system.
Key Features
- 90A current rating: suited to high-amp applications where ordinary plugs would add resistance.
- Molded nylon housing: high-temperature material holds the contacts in position and helps protect against shorting and reverse polarity.
- 4.5mm brass contacts: gold-plated spring connectors for reliable contact and minimal resistance.
- Semicircular solder terminals: make wire installation straightforward and accept heavy-gauge wire.
- Lightweight: just 6g per connector, so it adds almost nothing to your build.
Specifications Explained
The 90A rating tells you this connector is intended for high-drain setups, not small low-power electronics. The 4.5mm metal connector size refers to the diameter of the brass contacts, which gives a large contact surface area for current transfer. The nylon insulation material is chosen for its resistance to heat, helping the housing keep its shape under load. With two contact positions and a male gender, this is the plug half that mates with a corresponding female XT90 connector. The yellow colour makes it easy to identify in a wiring harness.
Compatibility and Requirements
This is a male XT90 connector, so it pairs with a female XT90 plug. It is designed for soldered wire connections; you will need a soldering iron and suitable wire to install it. The semicircular terminals can accept up to 8AWG wire. No other accessories are included.
Typical Uses
Use this connector on drone power leads, RC car and boat battery packs, and other high-current DC power systems that use the XT90 standard. It is a practical choice for replacing a damaged male plug or building a new battery harness.
What's in the Box
One Amass XT90 male connector with housing.
Quick specs
- Item Type
- Battery Connector
- Model Series
- XT90
- Metal Connector Size (mm)
- 4,5mm
- Metal Material
- Brass
- Wire Insulation Material
- Nylon
- Rated current (mA)
- 90 A



















